Add the nodes for enable qrtr communication between primary vm and
oemvm on sun.
This adds platform devices and vdevice descriptions to start the
qrtr gunyah transport on both primary vm and oemvm device trees. This
also adds the device tree node to configure qrtr as node id 21 on oem
vm.
Change-Id: I1575853a67fe9edbcb751dbb71062b6da624d9be
Signed-off-by: Kishore Kumar Ravi <quic_kiskum@quicinc.com>
Update the L11B and S7I regulator max voltage limits to match
the latest guideline.
Change-Id: Ia36cdbe8ad6526070e43325ff3cdb2cc6bfc58f0
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Disable tpdm ddr-ubwcp, because the clocks associated with it are
not enabled.
Change-Id: I4bebde68995bc9831c067ca25978fae858b7536c
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Current setting votes for 912mV for the QMP PHY vdd rail, which is above
what is recommended from the power grid. Set the vdd operating voltage to
880mV to match what is suggested, in order to maintain the regulator
numbers expected for the rail.
Change-Id: Iaefd58656c72427933e45000db21f55bc5de979c
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Arch timer and memtimer frequencies were set incorrectly for
silicon, so set to 1 GHz.
Change-Id: I309c1d79712145a4c86d168d923f91d6a6792142
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Update the binding information for the STMicroelectronics
touch driver, adding st_fts compatible string.
Change-Id: I78b31190d75720dd68f2b74c74fa67777fad650c
Signed-off-by: Rohith Iyer <quic_rohiiyer@quicinc.com>
Add device tree node for measure nodes and enable
debug cc driver on Sun.
Change-Id: I5475161d0f1d7ce488b6372d19ba1212dea238f5
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Add bindings for llcc_perfmon tool, populate llcc_perfmon
as child node of llcc cache-controller node.
Change-Id: Ib65da3295569297697cc039d39f3aef95887e482
Signed-off-by: Aman Kanwar <quic_akanwar@quicinc.com>
The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
used to build Energy Model and subsequently capacity values are derived
from them which in turn is used by EAS to take placement decisions.
Add these to sun devicetree.
Change-Id: If96b00b5ba1e211867ba9b44c5af5f2c9e65200f
Signed-off-by: Sai Harshini Nimmala <quic_snimmala@quicinc.com>
Add gclk cycle counter register information to devicetree in a
separate node for use by associated driver.
Change-Id: Ie27724dc04703d496a652729d61e03e0f4ff0115
Signed-off-by: Sai Harshini Nimmala <quic_snimmala@quicinc.com>
