Add qcom-spmi-temp-alarm devices for the TEMP_ALARM and TEMP_ALARM_LITE
PMIC peripherals found in PMICs PM8550VE_D, PM8550VE_G, PM8550VS_F,
PM8550VS_J, PMIH010X, and PMD802X which are used on Sun boards. Each
TEMP_ALARM device can monitor the die temperature of a particular PMIC.
Change-Id: I3e29ec91f50a5c27d4a8e581c9c17ad3ae09d187
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add a gpio-keys device for Sun MTP, CDP and QRD boards that use
PM8550 GPIO 6.
Change-Id: I3b6ec4f7cb826cd482e85cdbbcbea3db485284c1
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add the LPG LED device for sun platforms. Currently, pm8550 LED
devices use the downstream leds-qti-tri-led driver. Update the LED
devices so that they use the upstream leds-qcom-lpg driver.
Change-Id: I6e9c80d9e7725e5978fbc8bebf02a7d66968d32e
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Sun and pineapple share certain PMICs. Prepare the shared PMIC devices
to be used for both Sun and Pineapple.
Change-Id: I378e781751b4ee42b3c0d4940dff30ffbd2b3e5a
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add spmi-pmic-arb devices for the primary and secondary SPMI buses
found on Sun. The primary bus operates at 19.2 MHz and is used for
most of the PMICs.
The secondary bus operates at 4.8 MHz and is used exclusively for
charging PMICs. Note that the secondary bus is not connected to
the SoC on the board due to voltage level differences. Therefore,
keep the secondary bus device disabled.
Change-Id: I6b2bb6b54e285fd9c333971b08134c3768087869
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add crmb and crmc register space for cesta devices on pineapple.
Change-Id: Ia8ec195ca1683e652b31a5daa2ab271e8bcec321
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
GCC needs to probe before GDSC regulator driver as driver will be
unable to read registers without required gcc config ahb clocks. These
config ahb clocks are enabled in GCC probe. Thus GCC needs to probe
before GDSC driver. Adding GCC phandles to sequence the probe order
during kernel boot.
Change-Id: Icd13d18f07540f96cb4175edc5bd41526b6a3841
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Port of the DT entry which provides configuration settings for the
msm_sharedmem driver. This is needed for correct operation of
MPSS RFS/EFS.
Change-Id: Ic08e19398f10908920f8ac1d7e4670109de5e356
Signed-off-by: Marc Guillaume <quic_mguillau@quicinc.com>
Add bindings for WCD and WSA in pinctrl dt
file for sun.
Change-Id: Icb1fd6fb5950c5814cb4039d369647baac93ddf3
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Audio kernel depends on the aliases label being defined
from the top level. Add label to aliases node to allow
for proper compilation of audio kernel.
Change-Id: Idb88dd470ca0dec31670adef8546e34fee14a4d7
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Describe the registers and interrupts of the kgsl_iommu device.
Change-Id: I632cdb3f204dda4af32829c0e373c15065f87af9
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Set regulator-always-on for VDD_MMCX and VDD_MXC on Sun
RUMI. This ensures that clock controller register values
are maintained since RUMI isn't simulating register
retention across VDD_MMCX or VDD_MXC power collapse.
Change-Id: I5adaa243066df64f6f04f569a05eb124734d7611
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Define adsp mem heap region for adsp-mem device. Also
add documentation for the same.
Change-Id: Icce88b87c28797ff51ba5b0d885706d3a903eee3
Signed-off-by: Anirudh Raghavendra <quic_araghave@quicinc.com>
Add bi_tcxo_ao phandle for camcc, dispcc and evacc on Sun.
Change-Id: Ibece684c5010c9b32ec92228f4c2e9811e69e323
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Remove the usb-role-switch property for pineapple target.
USB SW driver will assume that the USB cable is connected and
enumerate w/the PC.
Change-Id: I6f2f1b292792bc064722fdeff3807ea4c3fa5a53
Signed-off-by: Bruce Levy <quic_blevy@quicinc.com>
Unstub tcsrcc for Sun. Also shrink the tlmm
region to avoid overlaps, but that tlmm doesn't
use anything past where we're shrinking it.
Change-Id: Id9f09105ad959ba9c9f44b2cb3912e1f93bba3b3
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add the smp2p nodes for lpaidsp, modem, cdsp and soccp for sun.
Change-Id: I9664b57fbb8f39e5edbadfad66882d97fe1634d3
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Add the nodes to describe the QMP devices to communicate with AOSS and
TME.
Change-Id: Iaac6b401e3554ce696a9faf5abaeb16717ff0907
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Add PDC interrupt controller to support wake irqs.
Change-Id: I459a68079611f7ed08977b2296b7d4377eb649ee
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Flash LED compatible string has been updated from "qcom,pm8350c-flash-led"
to "qcom,qti-pm8350c-flash-led" in Sun. Update existing usage of the
old compatible from Pineapple dtsi files found in Sun.
Change-Id: Ib062510cd6561e57973cca336d2a5b04884ec5d8
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Update memory map to V6, from a baseline of V4.
Change-Id: I167de96b3a2f199188a4d8c995aa49ef6b83fee1
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
