Mark gpucc clock node as GenPD provider and disable the
graphics GDSC regulator nodes.
While at it, keep the gdsc's as it is on rumi platform.
Change-Id: I91b4915723e26685e950de3ae575540ac3940036
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
The device tree for dma heaps on vm was incorrectly included.
so, remove it.
Fixes: 92398e011c ("ARM: dts: msm: Enable securemsm related nodes for kera")
Change-Id: Ib812725bedfd0510d6a998ecc83fe5df8619391c
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Mark dispcc clock node as GenPD provider and disable the display GDSC
regulator nodes for kera platform.
While at it, keep the gdsc's as it is on kera-rumi platform and update
the compatible to align with freq plan.
Change-Id: If01f876b3d160cf5c1cfe6be13e3e4b42f62cfa6
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Mark videocc clock node as GenPD provider and disable the video GDSC
regulator nodes for kera platform.
While at it, keep the gdsc's as it is on kera-rumi platform.
Change-Id: I4a41aacbaa7d144f72db48b9af3a336a92ef95aa
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add support for rpmh and debug clock controller nodes on Kera platform.
While at it, keep rpmhcc node as dummy for KERA rumi platform.
Change-Id: Ic11513d45bbc9b3f172a411f854a2348af4bfb94
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add support for GPU clock controller and move corresponding
gdsc's from dummy to real on Kera platform.
While at it, add the clocks property to camera and display gdscs.
Change-Id: If3061a7603035e799e7548f0e2a93b7ded0e3005
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Fix (4082b0db ARM: dts: msm: Update stdout-path with serial0 alias)
to re-enable (09b0fdef ARM: dts: msm: update kernel bootargs for kera).
While at it align the same bootargs on rumi files.
Change-Id: I032af3b9ea9a78418ef7360fc5d8b94885c6a8e6
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Memshare driver allocates and share the memory with the modem
clients for their use. The device tree information for memshare
driver on tuna is added to specify client details.
Change-Id: I577cccac63d4aeb54dcf7a9470cd8672c6c016d4
Signed-off-by: Fenil Panwala <quic_fpanwala@quicinc.com>
1.Disable some pmic dt nodes/properties which are not required for kera.
2. update regulator voltage support for kera
as per latest HW recommendation.
3. Update i2c instance for kera for slave charger debug support.
Change-Id: Iebcf53837ff021db418fb2cbd16f1fb1ba494304
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Increase cma size by 4MB for use by memshare IMS usecase.
This is inline with sun.
Change-Id: I81f6da44aa02c00c895854d69dbd949b70f541ff
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add thermal overlay support for kera and tuna.
Change-Id: I87a87a173715e9d748e8bab7250d34530be03554
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
Temporarily disable mem-offline node in tuna to resolve
bootup crash due to page allocation from movable zone.
The bad page state was reported for Movable zone
[ 84.281664][ T1622] BUG: Bad page state in process Jit thread pool pfn:a22bfe
[ 84.291750][ T1622] page:fffffffe268aff80 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xa22bfe
[ 84.301978][ T1622] flags: 0x4000000000000000(zone=2|kasantag=0x0)
[ 84.312225][ T1622] page_type: 0xffffffff()
[ 84.342884][ T1622] page dumped because: nonzero _refcount
[ 84.385712][ T1622] page last allocated via order 0, migratetype Unmovable, gfp_mask 0x140dc2(GFP_HIGHUSER|GFP_COMP|GFP_ZERO),pid1462, tgid 1434 (binder:1434_1), ts 73871020589, free_ts 82485610563
<https://android-review.googlesource.com/c/kernel/common/+/3345971>
This fixes the bootup crash by TAO preventing page allocation
from movable zone but will land in QCOM branches through LTS.
Once landed revert back this temporary change.
Change-Id: Ibde1fab99236e3d44356ba412d53eac8da4cee03
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Remove CXM UART2 GPIO(100,116) from list of reserved GPIOs
as it is not PORed.
Change-Id: I18eaacf40ce766dab0e2c546f62829a06384b84a
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Add qrtr gunyah tuivm node to enable communication between
PVM and TUIVM.
Change-Id: Ia81cca25f13d22f249350f5704264822c242123a
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Add the nodes to enable qrtr communication between primary vm and
oemvm on kera.
This adds platform devices and vdevice descriptions to start the
qrtr gunyah transport on both primary vm and oemvm device trees. This
also adds the device tree node to configure qrtr as node id 21 on oem
vm.
Change-Id: Icdcfcb4872351df13561c2c6963f06094f46d8c6
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
GLINK PKT provides a userspace interface to RPMSG GLINK through
character device node. Add the nodes and corresponding channel
devices to enable GLINK communication from userspace.
Change-Id: I2347b12c733459ead821db476e446fbde470c03a
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
trust_ui_vm_mem and oem_vm_mem reserved memory nodes are added twice
for Kera. Remove one set of redundant nodes.
Change-Id: If17767b4f4dd6f75786bcb833eba6e10a34bc9ec
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add test nodes for Kera Trusted VM and OEMVM.
Change-Id: I8a5f22920a942df8e04818adee715d58abc74e04
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add remote debugger device configuration. The Remote Debugger driver
allows a debugger running on a host PC to communicate with a remote
stub running on peripheral subsystems.
Change-Id: I23fa75b2f830a4877aafeeb3aa27d6d4275832ed
Signed-off-by: Devender Kaushik <quic_dkaushik@quicinc.com>
Some devices refer to the GPU node that is populated in a GPU
overlay file. Provide a stub GPU dt node that can be used in the
kera devicetree.
Change-Id: Ic75d95521e0388a2c5617cf4b5fcfe82a0d9496e
Signed-off-by: Harshitha Sai Neelati <quic_hsaineel@quicinc.com>
Add charger PMIC changes to the kera variants.
While at it add ADC channels for pmic_glink_adc and
debug channels for pmic_glink_debug for kera platforms.
Change-Id: Iab9f94b44eca9365b84bc78c2666e4f66a344455
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add cpufreq cycle counter register information to devicetree in a
separate node.
Change-Id: Ib9c21300cda585d4f25be12cb9527d719eb630ea
Signed-off-by: Atul Pant <quic_atulpant@quicinc.com>
