Add ipcc_mproc_n1 device tree node and entries to enable IPCC and mbox
communication between TUIVM and CDSP SecurePD on tuna TUIVM.
Change-Id: Ia38df4150a766a66cdead3c2dd60b4e6fc2fc4cd
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Add support for camera, cambistmclk and display clock controller nodes
on Kera platform. While at it, move camcc and dispcc gdsc's to real
alongwith required interconnect voting for camcc_titan_top gdsc and
updated dispcc crm property name for tuna platform.
Change-Id: I844a35d688eb4050212e11e81eae1aaa55a4a24f
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Remove invalid GPIOs and replace them with corresponding pins for Tuna
SoC.
Change-Id: I9db60c4edde97c63296380fd4df7557cf2b5d2e9
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add support for the following LCDB devicee tree properties:
"qcom,ncp-symmetry" to make NCP voltage follow LDO voltage directly.
"qcom,high-p2-blank-time-ns" to control the higher clamp threshold for
p2 minimum on time.
"qcom,low-p2-blank-time-ns" to control the lower clamp threshold for
p2 minimum on time.
"qcom,mpc-current-thr-ma" to control the mpc threshold for inductor
current after start up is done.
Change-Id: I873d177fd71da7a98aa043f1b30db7c42a6cd803
Signed-off-by: Ashok Kadavul <quic_asholnu@quicinc.com>
Add pmic overlay support which includes UI peripherals,
Volume key support, UFS sdam changes and thermal zones
changes for kera.
Change-Id: Ic46f25ed0860449b66257895bfc923f4baf6bfa5
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Commit 95fd342 (pinctrl: qcom: Add missing pins for Tuna SoC and
update egpio) updates the UFS_RESET pin from 187 to 191. This commit
updates tuna UFS 'reset-gpios' to 191 to ensure proper functioning of
UFS.
Change-Id: I3e7720449ca439b8ea2c0364137408d8d91a5701
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Add pmic-glink support and its clients: -
1.ucsi.
2.qti-battery-charger.
3.altmode.
For debug support enable other clients like: -
1.glink-adc.
2.charger-ulog.
3.glink-spmi-regmap.
4.battery-debug.
Change-Id: Ida1252a029918ce53bd97ba9fcbdea89e253a774
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add the "gcc_cfg_noc_pcie_anoc_ahb_clk" clock for tuna.
Change-Id: Ib023883dc4aac18e024aa8f0250de7aa5ad2b91a
Signed-off-by: Paras Sharma <quic_parass@quicinc.com>
Add support for LowSVS on ICC for soccp.
Change-Id: Ic845482060c91edf4e9bab3f2248dd6299f43194
Signed-off-by: Auditya Bhattaram <quic_audityab@quicinc.com>
For upstream and tvm, qup common driver uses gcc phandles which
are common in dt and to avoid qup driver probe failure, add gcc
qcom-dummycc support as they are nop. This helps in avoiding
additional logic in qup driver to not conditionalize based on
variant.
Change-Id: I00c3c59116519822be0368511499874951d0d882
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add Camera, Display, PCIe CESTA nodes for tuna. Also disable
them in RUMI till validations are completed.
Also rename the syscon device to avoid naming conflicts.
Change-Id: Ia8238c95b18a9992efe34e34d062e3835b501dcf
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Describe the register, interrupts, and settings of the arm-smmu device.
Change-Id: I7a2be4e5b344a40c42657e5d03f2bc88696f29c1
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
In this change EUSB_1P2 is added for eusb_phy and Refgen support
is added for SS Phy.
Change-Id: I1d6726882725c958178f0ad43bbd0ae264cb6046
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
