Merge "dt-bindings: qpnp-lcdb-regulator: Support for some LCDB DT properties"

bindings/regulator/qcom,qpnp-lcdb-regulator.yaml

@@ -33,6 +33,11 @@ properties:
                  to be enabled only on platforms where voltage needs to
                  be ramped up with multiple steps.
 
+  qcom,ncp-symmetry:
+    type: boolean
+    description: Enabling this will make NCP voltage follow LDO voltage
+                 directly.
+
   qcom,pwrdn-delay-ms:
     description: Required to control the LDO power down delay.
                  Possible values are 0, 1, 4, 8.
@@ -44,13 +49,30 @@ properties:
   qcom,pwrup-config:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Controls the order of powering up BOOST, LDO AND NCP
-                 blocks. Appilcable for PM7325B. Possible values are 0, 1, 2, 3, 4.
+                 blocks. Applicable for PM7325B. Possible values are 0, 1, 2, 3, 4.
                      0 - Boost, LDO, NCP
                      1 - Boost, LDO
                      2 - Boost, NCP
                      3 - Boost only
                      4 - Boost, NCP, LDO
 
+  qcom,high-p2-blank-time-ns:
+    description: Controls the higher clamp threshold for p2 minimum on time.
+                 Applicable for PM7325B. Possible values are 40, 69, 99, 129, 159,
+                 189, 220, 250.
+
+  qcom,low-p2-blank-time-ns:
+    description: Controls the lower clamp threshold for p2 minimum on time.
+                 Applicable for PM7325B. Possible values are 40, 69, 99, 129, 159,
+                 189, 220, 250.
+
+  qcom,mpc-current-thr-ma:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Controls the mpc threshold for inductor current after start up
+                 is done. Applicable for PM7325B. Possible values are 160, 200, 240,
+                 280, 320, 360, 400, 440.
+
+
   qcom,ttw-enable:
     type: boolean
     description: Touch to wake-up support enabled.