Add devicetree support for Tuna7 and TunaP SoC.
Change-Id: I5f94559c66f00bcb746fc05f7c445a8e2501d862
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Update memory map for kera, inline with v4.
Change-Id: Ifc5acdc379372239f4fde0f22fcd8c17f66ce636
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Add wcd usbss node for CDP to detect mic from wcd usbss driver.
Change-Id: Ic7fbab156a2dda2185a80c96d6589764ca66b57d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Remove lpass_bt_swr in ssr devs as bt_swr is disabled in
Kera cdp variant.
Change-Id: Idd149e79b09c1cd3db57100887c3e187bd8420c8
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Add ACD control register values and support for Kera GPU.
Change-Id: Idfb20fe8b46655fadf121d2a8192a4fbc42c051c
Signed-off-by: Sanjay Yadav <quic_sanjyada@quicinc.com>
Add ACD control register values and support for Kera GPU.
Change-Id: Idfb20fe8b46655fadf121d2a8192a4fbc42c051c
Signed-off-by: Sanjay Yadav <quic_sanjyada@quicinc.com>
According to the Hardware Programming Guide, when going into hibern8,
select XO clock (RPMH_CXO_CLK) clock as the parent of the phy symbol
mux clocks (GCC_UFS_PHY_RX/TX_SYMBOL_0/1_CLK_SRC). When exiting the
hibern8, select the phy symbol clocks (UFS_PHY_RX/TX_SYMBOL_0/1_CLK)
as the parent of the phy symbol mux clocks.
Change-Id: I624f98c39b7548dc2a9a5207d82600bb69ac41d5
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Update memory map for kera, inline with v4.
Change-Id: Ifc5acdc379372239f4fde0f22fcd8c17f66ce636
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Update frequency plan as per the latest recommendation.
Change-Id: Ic44a74c73793f8874076e62ae231b7e6326e897d
Signed-off-by: Rohit Jadhav <rbjadhav@qti.qualcomm.com>
Add support for 1150MHz frequency (Turbo L2) in Kera GPU.
Change-Id: Ibe95ea6dbfaae4090879d59e45d746ce94eff096
Signed-off-by: Kaushal Sanadhya <quic_ksanadhy@quicinc.com>
Reserve 16kb to dcc on TZ while HLOS have 16 KB.
Change-Id: I2063be0924b5719bd2c3abfffc84c0044d74ae37
Signed-off-by: Yingchao Deng <quic_yingdeng@quicinc.com>
(cherry picked from commit 285a63e7b4)
This update adjusts the PHY timings for the VTDR command mode panel on
Kera RCM/CDP platforms based on the required FPS, following the removal
of the qcom,mdss-dsi-panel-clockrate hardcoding. Previously, the
hardcoding resulted in uniform panel PHY timings across all FPS.
Some Kera RCMs have exhibited screen freeze issues when switching from
120 FPS to 60 FPS in command mode after the removal of the hardcoded
clock rate. Interestingly, this issue has not been observed on Kera
CDPs and other platforms, suggesting potential underlying hardware
differences between CDPs and RCMs that necessitate proper tuning of
panel PHY timings.
Update the panel PHY timings to fix this.
Fixes: I1c3c77eed76 ("ARM: dts: msm: remove hard coded panel clk rate
for kera RCM").
Change-Id: Iffd1d5da485d6961baa49ff96a65882c491a8ff6
Signed-off-by: Abhinav Saurabh <quic_abhisaur@quicinc.com>
This change sets aux switch as fsa4480 for kera qrd platform.
Change-Id: Ie6b3311879dcc84284c32a4801a98b50fbe6c07b
Signed-off-by: Yahui Wang <quic_yahuiw@quicinc.com>
Add support for 1150MHz frequency (Turbo L2) in Kera GPU.
Change-Id: Ibe95ea6dbfaae4090879d59e45d746ce94eff096
Signed-off-by: Kaushal Sanadhya <quic_ksanadhy@quicinc.com>
Add MHI device related DT bindings on sdxkova.
Change-Id: I4bbdfc6e29555d6011cd474f5d0e54d9cd6517d7
Signed-off-by: Anvita T <quic_atadepal@quicinc.com>
Add PCIE endpoint related DT bindings on sdxkova.
Change-Id: Ied1e29b5f272cd10b18334e710c611c407422c43
Signed-off-by: Anvita T <quic_atadepal@quicinc.com>
Increase the number of pipe clock toggles that will occur after
phystatus goes high at the output of the PHY during L1SS/P2 entry
in PCS_PCIE_POWER_STATE_CONFIG6 register, so that if the phy and
controller goes out of sync this may help us. The number of pipe
clock toggles is equal to (4*value)+1.
Change-Id: I7a31882f18879ef990825aa2d978fc7f39233472
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Add the soc-specific compatible string as it is
required to apply appropriate keepout regions.
Change-Id: I59fe0c9dffdf182bfb52468ef5a0d564ad7a8b38
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Update frequency plan as per the latest recommendation.
Change-Id: Ibdd4774022e90ebc0c670ce2cadc071b988698d4
Signed-off-by: Gayathri Veeragandam <quic_gveeraga@quicinc.com>
Add dtsi node to enable Hardware key manager for monaco target.
And add the device tree bindings for the Hardware key manager driver.
Change-Id: If1e38c3c71148fd85058eb31d4eee5f806e47fef
Signed-off-by: Shivangi Kesharwani <quic_skesharw@quicinc.com>
Add ulps and roi support for 120hz, 90hz & 60hz
VTDR6130 panel on Kera target.
Change-Id: I21bf599aadc6d4f10d25c3f1d232c1ba37a0d8b1
Signed-off-by: Abhinav Saurabh <quic_abhisaur@quicinc.com>
Add record in audio-routes for tuna7
where it is missing for record over AATC.
With this can record using AATC.
Change-Id: I9a76e16d5dc8168a11411ce715559350e6cc0c1f
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
(cherry picked from commit d2fe78d4a6)
