Qualcomm Technologies, Inc. (QTI) High Voltage (HV) PMIC haptics
modules can support up to 10 V voltage to drive either ERM or LRA.
It has an integrated module to support auto resonance detection
and correction for LRA actuator. It can play different vibration
effects with different pattern sources. It also has an integrated
brake module which can work in different modes to use BEMF for
quick vibration stop.
This is a snapshot of qcom-hv-haptics.txt as of qcom-6.1 branch
commit 3bb6ba2f4e26 ("bindings: qcom-hv-haptics: add
"qcom,primitive-id" property") which was converted to yaml
format.
Change-Id: I7ef8f804e6acacdedaae7fb2789641779e45d01d
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add bindings for the PMIC Glink ADC device. This device provides
a mechanism for software to read multiple ADC channels of
Qualcomm Technologies, Inc. PMICs using the Glink interface to
communicate with charger firmware.
Change-Id: I805b13893f80ce993496e35767a89b09ae163254
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add binding documentation for the Qualcomm Technologies, Inc.
Glink PMIC debug controller device. This device provides an
interface to read and write PMIC registers over PMIC Glink using
a remote subsytem (e.g. DSP). This allows for debugging PMIC
peripherals that would typically only be accessible to the
charger and fuel gauging firmware running on the remote
subsystem. The PMICs may be physically connected using either
SPMI or I2C.
This is a snapshot of qcom,pmic-glink-debug.txt taken as of qcom-6.1
commit 5c116d156aae ("bindings: pmic-glink-debug: Add SPMI bridge bus
support") which was then converted to yaml format.
Change-Id: Ie4b3e188feea28b9c80413b0397eb1658e03835f
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
QTI charger ulog glink device helps to get ulogs from charging
and gauging stack by communicating with charger firmware running
on the remote subsystem (e.g. DSP) over PMIC Glink.
Change-Id: I0c9a6c2413c28c9397cc69092881e3d15f6d6577
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
QTI battery glink debug device helps to get logs and debug
information by communicating with charger firmware running on the
remote subsystem (e.g. DSP) over PMIC Glink.
Change-Id: Ia3d3679ebce4b3f9d3a6e059eca22b7e9458cda7
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Qualcomm Technologies, Inc. (QTI) Programmable Boot Sequence
(PBS) devices help triggering certain PBS on QTI PMICs when
available for APPS.
Change-Id: I9148ff20220b998b1634fb9c26d462b2a25d6586
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add Qualcomm Technologies, Inc. PMIC PON log device bindings. The
PMIC PON log device parses power-on, power-off, and fault messages
stored in a binary log within the SDAM memory found on some QTI
PMIC devices.
This is a snapshot of the file qcom,pmic-pon-log.txt taken
as of qcom-6.1 branch
commit 8e58283f0a59 ("dt-bindings: soc: qcom: pmic-pon-log:
define bindings for multiple nvmem") which was then converted
to yaml format.
Change-Id: I6256c17a8334e5ae721427c5d4f1d3352dc72daf
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to inclde compatible strings for PMXR2230 and PM6450 PMICs.
Change-Id: I4a4e797b3f86fe9dec326895d38e1a4204e76f6b
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add binding documentation for the SPMI debug bus found on SPMI
PMIC arbiter version 5 and above. This debug bus has read and
write access to all PMIC peripherals regardless of ownership
configurations. It cannot be used on production devices because
it is disabled by an eFuse.
This is a snapshot of the file qcom,spmi-pmic-arb-debug.txt
taken as of qcom-6.1 commit b522c3b6d065 ("dt-bindings: spmi:
spmi-pmic-arb-debug: define enable fuse property")
which was then converted to yaml.
Change-Id: I344ddea23ecb09bede5cbdb19197ab52b24dda44
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add documentation for the qcom,can-sleep property. This is used
for slow SPMI busses which may sleep during transactions.
Change-Id: Ib07ffa28a0aa167571501e2493f5f03ad575755e
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add documentatio for qdss component coresight-remote-etm. correct
the format of qcom,coresight-csr.yaml.
Change-Id: I024a7245997f51a02118d0abf8bd9932763772fb
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Add interconnect device bindings for Pineapple SoC. These devices
can be used to describe any RPMH and NoC based interconnect devices.
Change-Id: I5475ae5c1d6457a71b670cd17ddc53ad71566ae8
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add documentation for qcom,ufs-phy-qrbtc-sdm845 rumi phy driver.
Change-Id: I3366aea0afbe5fec71ddc953f86ce125e42d93f8
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
