GLINK PKT provides a userspace interface to RPMSG GLINK through
character device node. Add the nodes and corresponding channel
devices to enable GLINK communication from userspace.
Change-Id: I0b7c9b273df3201113095fba9c70d10599b8faf7
Signed-off-by: Kishore Kumar Ravi <quic_kiskum@quicinc.com>
Add the smp2p sleepstate and qsee_ipc_irq_bridge
nodes for sun.
Change-Id: Iecdde69fe89d883c87ea9cd527a6753355d2327d
Signed-off-by: Kishore Kumar Ravi <quic_kiskum@quicinc.com>
The mvs0c_gdsc needs to be enabled first for mvs0_gdsc to turn on
reliably, so list it as a parent to enforce this relationship.
Change-Id: I2b6cf6861d1bf8ddb8eb764be3ba175edee9e3db
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Needed for SPU pil on sun dtsi.
Remoteproc-spss, spcom and spss_utils are disabled.
Change-Id: I97519bacccee2f7094edbcf32e3fdac29d67ac77
Signed-off-by: Nurit Lichtenstein <quic_nuritl@quicinc.com>
Describe the communication channel used to communicate with the
firmware which supports onlining and offlining of memory.
Keep the device in a disabled state for now until a conflict
between THP and memory-hotplug features can be resolved.
Change-Id: I3d74d9d3d58d379b2a91ee976a72dddfb7a221c6
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add ufs support for mtp/cdp/qrd sun platforms.
Enable ufs's smmu fastmap attribute.
Enable ufs host and device resets.
Change-Id: I7e4194a48c022284308c3debd6e18be40289693b
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Add nodes to enable qcom dcvs, bwmon and memlat
on sun.
Change-Id: I515aa98f01b29fb51be11db33930f96193d13401
Signed-off-by: Amir Vajid <quic_avajid@quicinc.com>
Add nodes to enable scmi communication to cpucp on sun.
Change-Id: I574949e32e397047701f836d54115f56414ea023
Signed-off-by: Amir Vajid <quic_avajid@quicinc.com>
This change adds system low power violators device node.
Change-Id: Ie4b7923c2ef96d6d762275b7241948e120230163
Signed-off-by: Minghao Zhang <quic_minghao@quicinc.com>
Remove fixed-factor-clock and enable device node for rpmh
clocks under apps_rsc in place of fixed clocks.
Change-Id: I9c4d242882f29f616574e339581722b65f27a74f
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Update enable-method to PSCI. Add idle-states node and
update cpu node to include appropriate idle state.
Disabled all idle-states for rumi.
Change-Id: I313d52c60081ef1d568781e33d0f2fed1a1f2de4
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Based on upstream commit ee13b50 ("qcom: llcc/edac: Fix the base address
used for accessing LLCC banks"), the devicetree needs to be updated with
LLCC bank 0 through 3, instead of just the start LLCC bank 0 and the end
LLCC broadcast.
Change-Id: I1d2b758693f6a71338653fa677dbb833299475c6
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
The clock required to access this GDSC depends on a clock coming from
GPU_CC, which is enabled by default in gpucc probe. Add a phandle to
gpucc to ensure it probes first and enables the required clock.
Change-Id: I5aae1a6a1a3615cf1a8227b839a721a6af945243
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Add spmi-pmic-arb devices for the primary and secondary SPMI buses
found on Sun. The primary bus operates at 19.2 MHz and is used for
most of the PMICs.
The secondary bus operates at 4.8 MHz and is used exclusively for
charging PMICs. Note that the secondary bus is not connected to
the SoC on the board due to voltage level differences. Therefore,
keep the secondary bus device disabled.
Change-Id: I6b2bb6b54e285fd9c333971b08134c3768087869
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add base TUIVM and OEMVM device tree support for Sun RUMI platform.
Change-Id: I32598ce2c3488658e2c9caf0cd7a2368665c0b06
Signed-off-by: Meena Pasumarthi <quic_pasumart@quicinc.com>
Signed-off-by: Sahitya Tummala <quic_stummala@quicinc.com>
Add device tree entries for smcinvoke, shmbridge and tz-log
drivers and qseecom heaps.
Change-Id: I1a427c66e12a02532097db352a1d26fe5ececb9f
Signed-off-by: Anmolpreet Kaur <quic_anmolpre@quicinc.com>
Add initial devicetree nodes and entries to support
PCIe RC0 port configuration on sun.
Change-Id: I3b7419bfd376a51388785cc4e2f9702ddaabe397
Signed-off-by: Lazarus Motha <quic_lmotha@quicinc.com>
GCC needs to probe before GDSC regulator driver as driver will be
unable to read registers without required gcc config ahb clocks. These
config ahb clocks are enabled in GCC probe. Thus GCC needs to probe
before GDSC driver. Adding GCC phandles to sequence the probe order
during kernel boot.
Change-Id: Icd13d18f07540f96cb4175edc5bd41526b6a3841
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Port of the DT entry which provides configuration settings for the
msm_sharedmem driver. This is needed for correct operation of
MPSS RFS/EFS.
Change-Id: Ic08e19398f10908920f8ac1d7e4670109de5e356
Signed-off-by: Marc Guillaume <quic_mguillau@quicinc.com>
Audio kernel depends on the aliases label being defined
from the top level. Add label to aliases node to allow
for proper compilation of audio kernel.
Change-Id: Idb88dd470ca0dec31670adef8546e34fee14a4d7
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
