Enable global clock controller on Sun. Enable GCC GDSCs
and update PCIE, UFS, USB30 gdsc in respective device entries.
Change-Id: I48f8fdd536657104f5e2e238aed3383e58f29fd3
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
This is a snapshot of pineapple pinctrl binding(including vm)
present on qcom-6.1 as of
commit 0b1741b63e1e ("bindings: pinctrl: pineapple: Document
qcom,i2c-pull")
commit 6f1b4c192ef9 ("bindings: Adding bindings to support vm
on Pineapple") .
Change-Id: I2f5959558dadf108c2161a6ed7ae319be210a779
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Add GCC clock controller binding for Sun device.
Change-Id: I08dc47113cb3182d1ece9b632b272c1929da33bc
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add stub regulator devices for the SMPS, LDO, and BOB regulators
found on the PMIC chips which are used on Sun boards. This
ensures that consumers can use the regulators successfully.
Change-Id: I23a02c960adbb46b09c7648458d7c367636993c3
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add the bindings for the msm_qmp driver in YAML.
Change-Id: I4fdddf7f88c2ba8777f0c674238b19e496e093c3
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Add stub interconnect devices. This will allow consumers
to get their path and set bandwidth constraints on them.
Change-Id: I6f2adf0ba4fd5f34fc6119fd5f0a7314cc92691d
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add interconnect device bindings for Sun. These devices can
be used to describe any RPMH and NoC based interconnect devices.
Change-Id: Ib0bc70d1400b827fdf4e4d930a794fef1426ec46
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add stub clock nodes are required for clocks client to
request, so add support for the same.
Change-Id: I9c26dcc16e90e79aaf2b7838d205f4c7c44b05bc
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add dummycc device bindings. These devices are used to reference
clock controllers and emulate clock operations.
Change-Id: I4f7251e6ee4475c8837375d5eea5658599f41635
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add stub-regulator device bindings. These devices can be used to
simulate any particular voltage regulator.
Change-Id: I5d15f825944747b6a0c95508219967bdd9590610
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Increase memreserve region on RUMI to match the reserved
memory region.
Change-Id: I353dc4d97cc0678a588b7fafb6732a4695dd6b52
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Describe the registers and interrupts of the arm-smmu device.
Change-Id: Ib228045ccfdc4a16204428b9bdbf7e1d6ff06a92
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add firmware node and scm node for Sun SoC.
Change-Id: I6f0c48638053ef07ac1fa393b1ff9b76478ed182
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Update cpu ids, spin-table region, and timer interrupts on sun
to enable multicore boot.
Change-Id: Ibc25a86992dddc997c58e8e10a749b3c79731244
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Allow for bindings to be found via symlinks.
Change-Id: I095931fb2fb50f1886a22d793df447c358fd0b14
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
