Add initial device trees to support Sun QRD sku1 and sku2 SoC
and it's platforms.
Change-Id: Ibf28cbc9f33f19908c4d8ac1b431d17632c43e6b
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Remove fixed-factor-clock and enable device node for rpmh
clocks under apps_rsc in place of fixed clocks.
Change-Id: I9c4d242882f29f616574e339581722b65f27a74f
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add RPMH_CXO_CLK as ref_clk to UFS for Sun on pre-sil.
On Rumi ref_clk is to UFS PHY is 19.2MHz and actual device
it is 38.4MHz.
Also update correct gcc header file for sun.
Change-Id: I78ed60095e5229405e7962f4676bfab7b7556676
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Describe the properties of the memory region virtio-mem supports.
Change-Id: Ifdc420d25c4fcf1acc93ccd82a80c89857b3c427
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Describe the message queues and capabilities of the mem-buf device.
Change-Id: I9ff137c3cfee8d5f9e56930bf8ca9a81066e0150
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add device_type property for the pcie devicetree nodes
in pineapple.
This is needed to make sure that the pcie devicetree node
is associated with the pci bus when ranges property gets
parsed by the of/address.c driver.
And this change is mandatory for pci devicetree nodes with
the introduction of the following change in of/address.c
upstream commit <3d5089c4263d> "of/address: Add support
for 3 address cell bus".
Without this change, BAR address allocation failure will
happen as error logs below as the flags cell in ranges
property in devicetree will be read wrong.
pci-msm 1c00000.qcom,pcie:err 0x0060200000..0x00602fffff -> 0x0060200000.
pci-msm 1c00000.qcom,pcie:err 0x0060300000..0x0063ffffff -> 0x0060300000.
pci-msm 1c00000.qcom,pcie: non-prefetchable memory resource required.
pci 0000:00:00.0: BAR 0: no space for [mem size 0x00001000 64bit].
pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x00001000 64bit].
Change-Id: I212e023880ed8373eb17379754da84b6947d1171
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Update enable-method to PSCI. Add idle-states node and
update cpu node to include appropriate idle state.
Disabled all idle-states for rumi.
Change-Id: I313d52c60081ef1d568781e33d0f2fed1a1f2de4
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Add a regulator over-current (OCP) notifier device along with
supply properties to map from PMIC peripherals to specific
regulator devices. This provides a mechanism to notify
consumers of a particular regulator when OCP occurs.
Change-Id: I17ee6af65492ece062722c41f97f3ea052970a25
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add a fixed regulator device for the DBO3 buck-boost regulator.
It is enabled via PM8550 GPIO 9 and outputs 3.6 V.
Change-Id: Iff6e0e1cceed6ad369fb67aca3926f5a808cf3e6
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add a PMIC PON log parser device which reads the log stored in
PMK8550 SDAM5 and SDAM6.
Change-Id: I944df2186b27ebb42cf2d4dc8f51dbf7b40cea9b
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
With the recent kernel upgrade to 6.4, swiotlb_init() path is taken
because of the new kernel config CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC,
which is enabled by default. But this should not done for trusted VMs
supported on Sun and Pineapple VMs, as these VMs would be using carveout
swiotlb memory set up separately by virtio mmio driver through the
feature CONFIG_SWIOTLB_NONLINEAR. Hence, add swiotlb=noforce kernel
command line to disable generic swiotlb setup/init for VMs. Without
this option set, VM boot up failure is observed.
Change-Id: Ia35cd9a2f95f41b0b0daa6cf75799fd4432a95bd
Signed-off-by: Sahitya Tummala <quic_stummala@quicinc.com>
Adding the firmware name and updating the additional memory assign node
for remoteproc's to be compatible with the driver.
Change-Id: I3787fd0c97c039821a91e15bc6e554caccf071a8
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Add qcom-spmi-temp-alarm devices for the TEMP_ALARM and TEMP_ALARM_LITE
PMIC peripherals found in PMICs PM8550VE_D, PM8550VE_G, PM8550VS_F,
PM8550VS_J, PMIH010X, and PMD802X which are used on Sun boards. Each
TEMP_ALARM device can monitor the die temperature of a particular PMIC.
Change-Id: I3e29ec91f50a5c27d4a8e581c9c17ad3ae09d187
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Specify a pinctrl configuration for PMK8550 GPIO 3 to enable
alt_sleep_clk output so that clients like WLAN and BT can
function properly.
Change-Id: I74506946647b55e391a8c848c44ccf20af966739
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Correct the following pcie1 dt property names on pineapple
device as they are modified for this latest kernel devicetree
documentation.
clock-frequency -> qcom,pcie-clock-frequency.
Change-Id: I048275f388f31fe71b157f1f9ab4aaf5eec6131b
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Based on upstream commit ee13b50 ("qcom: llcc/edac: Fix the base address
used for accessing LLCC banks"), the devicetree needs to be updated with
LLCC bank 0 through 3, instead of just the start LLCC bank 0 and the end
LLCC broadcast.
Change-Id: I1d2b758693f6a71338653fa677dbb833299475c6
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Based on upstream commit ee13b50 ("qcom: llcc/edac: Fix the base address
used for accessing LLCC banks"), the devicetree needs to be updated with
LLCC bank 0 through 3, instead of just the start LLCC bank 0 and the end
LLCC broadcast.
Change-Id: I7c2b62697721074660c6b7371e0d2b1bf195ba5d
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Add a gpio-keys device for Sun MTP, CDP and QRD boards that use
PM8550 GPIO 6.
Change-Id: I3b6ec4f7cb826cd482e85cdbbcbea3db485284c1
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add the LPG LED device for sun platforms. Currently, pm8550 LED
devices use the downstream leds-qti-tri-led driver. Update the LED
devices so that they use the upstream leds-qcom-lpg driver.
Change-Id: I6e9c80d9e7725e5978fbc8bebf02a7d66968d32e
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
The clock required to access this GDSC depends on a clock coming from
GPU_CC, which is enabled by default in gpucc probe. Add a phandle to
gpucc to ensure it probes first and enables the required clock.
Change-Id: I5aae1a6a1a3615cf1a8227b839a721a6af945243
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Correct the following pcie dt property names on pineapple
device as they are modified for this latest kernel devicetree
documentation.
qcom,pcie-clkreq-gpio -> qcom,pcie-clkreq-pin.
clock-frequency -> qcom,pcie-clock-frequency.
Change-Id: I79454ef04a69d5427e32c45042304809cdcb886c
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Enable tlmm VM mem access device tree nodes for Pineapple.
Change-Id: I2bfbc22e8f9e933e3d0ec419b3fa67ff89b4fdad
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
