Add idle states for CPUs and CPU clusters, added PSCI device,
to enable CPUs to enter deeper LPMs.
Disabled the idle states till Rumi validations are done.
Additionally. updated APPS RSC device to be in cluster power domain
to handle RSC activities when cluster is powering off.
Change-Id: I0dc50ff04bb480eb9ebdfa0bbaebfdf954c7c41b
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
The tui_test heap will be used by the large_dmabuf test
on sun-vm.
Change-Id: I84e5aee85c03e2cc809acc307509ce00aa74d967
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
When all clients remove DDR bandwidth vote, DDR may power collapse.
As part of its shutdown sequence, it waits for an 'active' signal to
no longer be asserted by the gpu cx gdsc. Thus, if SW votes for the
gdsc to be active, but not for DDR bandwidth, this sequence may
get stuck.
Change-Id: I48d704f08cfe6d17159eb04d02f5ed123809f967
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
APPS needs to place proxy votes to ddr and cnoc when the SOCCP is in D0.
Change-Id: Idfa93910b51c6df033ea010480c1a8adeacd4af5
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
SOCCP_SOCCP_SPARE_REG0 is used to check D0 status of SOCCP.
TCSR_SOCCP_SLEEP_STATUS is used to check D3 status of SOCCP.
Change-Id: Icee37cddb0b7ef303962cab0d9a8f37a211a05da
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Bindings file for WALT cycle counter driver is in incorrect location.
Move it to the correct location where all other bindings files are
present.
Change-Id: I9e8ef0a87ac6b311931535a82ccf3c784bcdc896
Signed-off-by: Sai Harshini Nimmala <quic_snimmala@quicinc.com>
Parrot need to follow non-relocatable absolute addresses for VM due to
firmware constraints. VM kernel load address is the start address of the
vm_mem_region and build system requires the load address of the kernel
to be 2MB aligned.
This patch adjusts the start address of the trust_ui_vm_mem region for
Parrot to align to 2MB. This also means reducing its size by 1MB.
Change-Id: I1816ec5f6ff18f55ecc4dec39958d442151f8cb0
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
Binding document to support MPAM(Memory System Resource Partitioning
and Monitoring) MSC(Memory System Component) interface framework added
to support multiple MSC components. Currently SLC(System Level Cache)
MSC support integrated to MSC interface with API support to configure
SLC Capacity and monitors.
Change-Id: I866b0e8cd6106f86535baf004d25e81e406e3e12
Signed-off-by: Avinash Philip <quic_avinashp@quicinc.com>
Vendor prefix qcom was updated for scid-heuristics properties.
Change-Id: I16c9e2197e348eac51d300258e482876bc51302e
Signed-off-by: Avinash Philip <quic_avinashp@quicinc.com>
Add initial device tree support for parrot/ravelin vm target.
This is a snapshot of dtsi files as of KP.1.0
'commit <370d8eab7cc6> ("Merge "ARM: dts: qcom:
Disable cnss-kiwi SOL on anorak platform"")'.
Change-Id: Iaf69c882974f38b69d9edd671d675f14dfb9774d
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
Add pmic-glink support and its clients like qti-battery-charger,
altmode, ucsi and pmic-glink-adc support for tuna.
Change-Id: Ib2dd7cee63e6697e744783aabf954b62814b7ad8
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add spmi-pmic-arb devices for the primary and secondary SPMI buses
found on tuna. The primary bus operates at 19.2 MHz and is used
for most of the PMICs. The secondary bus operates at 4.8 MHz
and is used exclusively for charging PMICs. Note that the
secondary bus is not used so it is kept disabled.
Add SPMI debug device and associated child devices for the primary
SPMI interface. This provides consumers with unrestricted access
to the PMIC registers on pre-production devices. This helps
make debugging easier.
Change-Id: I9efadb5082389a519f76f7b5db43f0bde84f2239
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Currently, 4 glink intents are used by sensors channels
Not enough for handling large no. of transactions between aon
and hal. Increase the no. of glink intents such that more
no. of transactions can be supported between aon and hal.
Change-Id: I676021e1f3968639c542a921bd213942cb2c8e2a
Signed-off-by: Sachin Patil <quic_sachpati@quicinc.com>
Add support for CAMCC and CAM_BIST_MCLK_CC clock controller nodes
on Tuna platform. While at it, move camcc gdsc's to real.
Change-Id: I14e7add272a549cd21c39083a26baac4c50de31e
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Child node support for SCID heuristics compatible device.
Change-Id: Id1fb1e190181d39053dce629c6807262032744ad
Signed-off-by: Avinash Philip <quic_avinashp@quicinc.com>
This change add device tree node for hdcp smcinvoke interface
for ravelin.
Change-Id: I76ddbb543f0eb03b406eed488b50e34011140c90
Signed-off-by: Shashikala Katthi <quic_skatthi@quicinc.com>
Remove cpu pause action on boot core in Parrot.
Change-Id: I59e4e6cfec9073cd94a5bf0fcff96158d4061835
Signed-off-by: Nitesh Kumar <quic_nitekuma@quicinc.com>
SW drv3 may be used sometimes by display panel. Add it.
Change-Id: I03fc0bee08c44447caf689b747b054f4aa62ffca
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
This feature is not supported on sun, and its memory region is now
reused by hypervisor for other purposes.
Change-Id: I027335e4f8358bed7cb692120ca0ba0b601b472e
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
ZRAM is being disabled on tuivm due to observed stability issues due to
ZRAM's use of GFP_MEMALLOC. Increase maximum movable zone size to
compensate.
When kswapd swaps out pages, PF_MEMALLOC is set, which results in zram
ignoring the min_watermark, and lowmem_reserve. This is problematic
because we intend for movable memory to stay in ZONE_MOVABLE, rather
than falling back to ZONE_NORMAL. If the later occurs to such a high
degree that all ZONE_NORMAL memory is consumed, as is observed to be
the case during a "C2PA" testcase, attempts to plug in additional
ZONE_MOVABLE memory may fail due to requiring a small amount of
GFP_KERNEL memory.
Change-Id: Ic847e90514f80ccb91daa98849440d7a9b97f156
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
"qcom,initial-movable-zone-size" creates a movable zone of the given size
before userspace starts. This is useful in a system where a userspace
component (psi-daemon) is used to hotplug in memory on a on-demand basis.
With swap disabled, the current tvm carveout size (68 Mb) hits
out-of-memory condition before psi-deamon is started.
Once psi-daemon is running, it detects the number of blocks added to the
movable zone via "qti_virtio_mem/kernel_plugged" sysfs file, and
can reduce or increment the number as necessary.
Change-Id: I5b62b6227e8a357ba3012979ed4bf937f1810437
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
