Add pmic-glink support and its clients: -
1.ucsi.
2.qti-battery-charger.
3.altmode.
For debug support enable other clients like: -
1.glink-adc.
2.charger-ulog.
3.glink-spmi-regmap.
4.battery-debug.
Change-Id: Ida1252a029918ce53bd97ba9fcbdea89e253a774
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add spmi-pmic-arb devices for the primary and secondary SPMI buses
found on kera. The primary bus operates at 19.2 MHz and is used
for most of the PMICs. The secondary bus operates at 4.8 MHz
and is used exclusively for charging PMICs. Note that the
secondary bus is not used so it is kept disabled.
Add SPMI debug device and associated child devices for the primary
SPMI interface. This provides consumers with unrestricted access
to the PMIC registers on pre-production devices. This helps
make debugging easier.
Change-Id: Idbb39999b00dd296419eb570b30083e208cf2bce
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
This change adds the rpm-stats-v2 to the
rpm-stats dt binding.
Change-Id: I02d04d33347ea73ee29f59e0ca5691ecbb5b96fd
Signed-off-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com>
Add device nodes for the cpucp mailbox, cpucp logs,
and SCMI nodes for Kera.
Change-Id: Ia787f5f2b6fd739df0be380946beadef1963a0e9
Signed-off-by: Sayantan Chakraborty <quic_saycha@quicinc.com>
On qcom-6.6, the memory reserved for memory_dump_v2 should be
configured as reserved memory instead of CMA.
Change-Id: I181b9fc4431838879d3bb99ceafd4512bcf5914e
Signed-off-by: Yingchao Deng <quic_yingdeng@quicinc.com>
Add a PMIC PON log parser device which reads the log stored in
PMK8550 SDAM5 and SDAM6.
while at it add a dependency between the gh-watchdog and
pmic-pon-log devices for tuna boards. This ensures that
during system boot-up, the driver responsible for the
gh-watchdog device initializes before the one
responsible for the pmic-pon-log device.
Change-Id: I5e2c13807570e5a2e1740e9160cce626fa9004c6
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add clock and regulator which would be required for
register accesses of kgsl-smmu for kera.
Change-Id: I27045fc113f9bc2aa56455caae568f66253adf62
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Describe the properties of the memory region virtio-mem supports.
Also reserve the IPA space for dmabuf buffers.
Change-Id: I6baa1a7d00b26f1a885e9c85c57b7c30745dd5f6
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Describe the properties of the memory region virtio-mem supports.
Also reserve the IPA space for dmabuf buffers.
Change-Id: Iad6b41033884828a734aa8562dc3e4d45997968b
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Describe the properties and msgqs of the mem-buf device.
Change-Id: Ie05f273fd3747d4bf7a071ad5addae285ab612b4
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Describe the properties and msgqs of the mem-buf device.
Change-Id: I66e4847e8c141c917f3bda22663fc60e2634917a
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Describe the available dma-buf memory pools on tuna-vm.
Change-Id: Ia2bb3fff1f76a04c4f8a14b51917b59d029f8d5e
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Describe the register, interrupts, and settings of the arm-smmu device.
Change-Id: I8876e31db9cd232963987599c40d0d1b37e35f08
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add BOB regulator for tuna platforms so that clients can access
the regulator and vote on it.
Change-Id: Idd57e09c29eb1ef0b9a73f2ef9e64beae5040676
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add ddr-regions device tree node in Tuna and Kera to optimize
boot-up time as firmware will look for this node during boot
and if it finds it early, it will save some time in bootup.
Change-Id: If3d6f3be7331870b5ecec9834de1dbebfbb6c22f
Signed-off-by: Shivendra Pratap <quic_spratap@quicinc.com>
Previous commit c0ad941ff4 ("ARM: dts: msm: Add bootargs for tuna
and kera") reverted couple of other change due to merge conflict
and merge itself. Add the affected change again to fix the issue.
Change-Id: I469075244ad34f13ea7004baae9d9423ebc4584d
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
