ARM: dts: msm: add primary SPMI Arbiter and SPMI debug bus for kera boards
Add spmi-pmic-arb devices for the primary and secondary SPMI buses found on kera. The primary bus operates at 19.2 MHz and is used for most of the PMICs. The secondary bus operates at 4.8 MHz and is used exclusively for charging PMICs. Note that the secondary bus is not used so it is kept disabled. Add SPMI debug device and associated child devices for the primary SPMI interface. This provides consumers with unrestricted access to the PMIC registers on pre-production devices. This helps make debugging easier. Change-Id: Idbb39999b00dd296419eb570b30083e208cf2bce Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
This commit is contained in:
139
qcom/kera.dtsi
139
qcom/kera.dtsi
@@ -15,6 +15,7 @@
|
||||
#include <dt-bindings/soc/qcom,ipcc.h>
|
||||
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Kera";
|
||||
@@ -1189,6 +1190,144 @@
|
||||
qcom_cpufreq_stats: qcom,cpufreq_stats {
|
||||
compatible = "qcom,cpufreq-stats-v2";
|
||||
};
|
||||
|
||||
spmi_bus: spmi0_bus: qcom,spmi@c42d000 {
|
||||
compatible = "qcom,spmi-pmic-arb";
|
||||
reg = <0xc42d000 0x4000>,
|
||||
<0xc400000 0x3000>,
|
||||
<0xc500000 0x400000>,
|
||||
<0xc440000 0x80000>,
|
||||
<0xc4c0000 0x10000>;
|
||||
reg-names = "cnfg", "core", "chnls", "obsrvr", "intr";
|
||||
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "periph_irq";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
qcom,channel = <0>;
|
||||
qcom,ee = <0>;
|
||||
qcom,bus-id = <0>;
|
||||
};
|
||||
|
||||
spmi1_bus: qcom,spmi@c432000 {
|
||||
compatible = "qcom,spmi-pmic-arb";
|
||||
reg = <0xc432000 0x4000>,
|
||||
<0xc400000 0x3000>,
|
||||
<0xc500000 0x400000>,
|
||||
<0xc440000 0x80000>,
|
||||
<0xc4d0000 0x10000>;
|
||||
reg-names = "cnfg", "core", "chnls", "obsrvr", "intr";
|
||||
interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "periph_irq";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
qcom,channel = <0>;
|
||||
qcom,ee = <0>;
|
||||
qcom,bus-id = <1>;
|
||||
depends-on-supply = <&spmi0_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spmi0_debug_bus: qcom,spmi-debug@10b14000 {
|
||||
compatible = "qcom,spmi-pmic-arb-debug";
|
||||
reg = <0x10b14000 0x60>, <0x221c8784 0x4>;
|
||||
reg-names = "core", "fuse";
|
||||
clocks = <&aoss_qmp>;
|
||||
clock-names = "core_clk";
|
||||
qcom,fuse-enable-bit = <18>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
depends-on-supply = <&spmi_bus>;
|
||||
|
||||
pmk8550@0 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <0 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pmxr2230@1 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <1 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pm8550vs@3 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <3 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pmd802x@4 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <4 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pm8550vs@6 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <6 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pmg1110@8 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <8 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pmg1110@9 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <9 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pmr735d@a {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <10 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pm8010@c {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <12 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
pm8010@d {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <13 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
};
|
||||
|
||||
thermal_zones: thermal-zones {
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
#include "tuna-gdsc.dtsi"
|
||||
|
Reference in New Issue
Block a user