Provide separate file for SLT so that ABL can pick
it properly. Currently, ABL doesn't check if multiple
board-id is added.
Change-Id: I9140ca7b19f6b0b368798950145abbe28e32e778
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Currently, the node for eusb2_phy0 is defined but not used by controller
which makes the associated resources to be consumed. Therefore if phy
probes doesn't happen the controller goes into core soft reset failure.
Fix this by utilizing the node in the controller. This will call the
phy's probe and hence clocks & regulators will be initialized.
Change-Id: Ica46af01154d5e583e011e4f2d84a80fb0589ac8
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
The device tree for dma heaps on vm was incorrectly included.
so, remove it.
Fixes: 92398e011c ("ARM: dts: msm: Enable securemsm related nodes for kera")
Change-Id: Ib812725bedfd0510d6a998ecc83fe5df8619391c
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Mark dispcc clock node as GenPD provider and disable the display GDSC
regulator nodes for kera platform.
While at it, keep the gdsc's as it is on kera-rumi platform and update
the compatible to align with freq plan.
Change-Id: If01f876b3d160cf5c1cfe6be13e3e4b42f62cfa6
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Mark videocc clock node as GenPD provider and disable the video GDSC
regulator nodes for kera platform.
While at it, keep the gdsc's as it is on kera-rumi platform.
Change-Id: I4a41aacbaa7d144f72db48b9af3a336a92ef95aa
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add support for rpmh and debug clock controller nodes on Kera platform.
While at it, keep rpmhcc node as dummy for KERA rumi platform.
Change-Id: Ic11513d45bbc9b3f172a411f854a2348af4bfb94
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add support for GPU clock controller and move corresponding
gdsc's from dummy to real on Kera platform.
While at it, add the clocks property to camera and display gdscs.
Change-Id: If3061a7603035e799e7548f0e2a93b7ded0e3005
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Set RX settings mode to zero for Ultrashort channel settings
for TUNA PCIe controller.
Change-Id: Iff8a09f2ae474e8b8bec35a4dbbdc3df6fb40147
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Add glink probe driver entry to Tuna to have a way for
glink core to get pm notifications during apps suspend/resume.
Change-Id: Id2e6328217312ae3f220d57cc1ec2c69d48942e9
Signed-off-by: Sarannya S <quic_sarannya@quicinc.com>
Add base device tree support for CDP platform for Kera IoT.
Change-Id: I3242fd041fa15ad9d0a8316d6d3a9e1c304cd813
Signed-off-by: Bhasker Reddy Komatireddy <quic_kbhasker@quicinc.com>
Memshare driver allocates and share the memory with the modem
clients for their use. The device tree information for memshare
driver on tuna is added to specify client details.
Change-Id: I586040870c763494c18b273692d578b9b1a0bc10
Signed-off-by: Fenil Panwala <quic_fpanwala@quicinc.com>
