Add the secure-buffer device, which supports hypervisor operations
to change the stage 2 permissions of memory.
Change-Id: I98576bc919aecada2e7ab7bc5dfeadc8979a111d
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add documentation for the qcom,can-sleep property. This is used
for slow SPMI busses which may sleep during transactions.
Change-Id: Ib07ffa28a0aa167571501e2493f5f03ad575755e
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Enable cluster 0 cores from the command line instead of just
core 0.
Change-Id: I26b97122d353b3979467109babfded9a095b207d
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
With 16GB of DDR, existing drivers were trying to use 6Mb as follows:
2Mb: dma_atomic_pool_init(GFP_KERNEL)
2Mb: dma_atomic_pool_init(GFP_KERNEL | GFP_DMA32)
2Mb: qcom_iommu_util::dma_atomic_pool_init
Increase the reserved size to 12Mb to leave a small margin.
Change-Id: Id9bdfcca7560d40bddf3c9c526f9e3ee69ba9174
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add the device tree properties to the smem reserved memory region that
to match allows the smem driver to match and probe accordingly.
Change-Id: I4e0bdf3d26a9d0f7cf15a569e08988dddadf8183
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Switch to enable SMMU for the USB controller on sun.
Change-Id: I9b43a167beb2ab971ce48bbc5f03bf62512addc2
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Add the psci node and change the cpu enable method to psci
on the sun SoC.
Change-Id: I86f747a87169172ac215885c6de0e19be921f99f
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Change the sun rumi dt file to compile as an overlay.
Change-Id: I56dcc5349eac12c660981da0fc75f0173b27197a
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Adjust arch timer and memtimer frequencies on the sun RUMI to stop
IRQ storms during boot.
Change-Id: Ic34a125763701ec115db82cd5ed5259fb3bd9a28
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Add tz-log node for Sun which gets updated by Resource Manager.
With out this node, device tree overlay fails.
Change-Id: I9d54da4cf32272176e12d3cd49bc21f20e688f30
Signed-off-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Add stdout to chosen node for sun SoC and set maxcpus to 1.
Change-Id: I2633e4f96f3f9cbc047334200fc42921a5f5d6f7
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Add interconnect device bindings for Pineapple SoC. These devices
can be used to describe any RPMH and NoC based interconnect devices.
Change-Id: I5475ae5c1d6457a71b670cd17ddc53ad71566ae8
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add documentation for qcom,ufs-phy-qrbtc-sdm845 rumi phy driver.
Change-Id: I3366aea0afbe5fec71ddc953f86ce125e42d93f8
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Enable USB related properties for USB functionality on sun.
Change-Id: Ibb522859494c0e939b46a6b790448fc2e62bd37e
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
The UCSI Glink device handles the communication between OPM on
the Application processor and PPM which is charger firmware
running on the remote subsystem (e.g. DSP) over PMIC Glink.
This is a snapshot taken as of qcom-6.1
commit de2a781818d7 ("bindings: add support for qcom,ucsi-glink")
which was then converted to yaml.
Change-Id: I1ff3756302c40c88954109b6dccaf87e59e66919
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
