As now interconnect changes are in place, add interconnect voting
for remote processors.
Change-Id: I8a1016f0fe760b49aa88dd51bbb00ef7fdf785fb
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Commit I4a4ae323ea0 ("kernel-scripts: sun: Update not_preferred
settings") has updated the default isolated CPUs for Gold
clusters.
Since Isolation CPUs is preferred CPU for irq handling and not prefered
for task handling, update the ESI affinity for CQ to address the same.
Change-Id: I6fbb274d52418e9ebb965c6414c449543796d734
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Currently cpufreq delayed work is queued with delayed
timer as 30ms. On expiry, we monitor load and then
enable storage boost feature if load exceeds certain
predefined threshold.
Unlike pineapple, we are monitoring the load request only
on prime/large cluster and not on medium cluster.
This is causing some additional delay to reach the
threshold required to enable storage boost feature.
Benchmark tools like Antutu completes read or write IO
within 120-130ms which mean any small delay can impact
Antutu to large extent. Hence add medium clusters to perf
score similar to pineapple so that load on medium cluster
along with large cluster is considered.
This will decrease the window time to reach the threshold
to start the storage boost and hence improve Storage
benchmark performance.
Change-Id: I8563cffc4da8fa7729d38fc71c8996b20b79b1ec
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
(cherry picked from commit 167166ab42)
Add NVMEM cell for FMD_CONT_AFTER_PON to provide the option to prevent
FMD(find-my-device) feature disablement on PON trigger.
0 - Disable FMD feature on PON.
1 - Keep FMD feature enabled on PON.
Change-Id: I5e5386867546aacf526fe7be65e1e1e1ece30ffc
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
Add test nodes for Tuna Trusted VM and OEMVM.
Change-Id: I9b7fe8d547f764e5917e48ef36f9727018a8fb79
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add support for interconnect for sdxbaagha platform.
Change-Id: Ia59ecee142ff7bc4583e44b1e92a6bdcb592a337
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Update the TUNE_USB2_SQUELCH_U register (0xFD54) to a value of 0x4 in
the MTP platform’s override sequence. This adjustment addresses the
current issue of excessive RX sensitivity, which causes the device to
misinterpret noise as valid high-speed USB signals, leading to frequent
USB disconnections.
By increasing the squelch level, we enhance the precision of USB signal
detection, reducing false positives and improving overall USB stability.
Change-Id: Ifcd680e3c95170d168f693b4a6fd63aefe6c41d6
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Some target require refgen to operate. For this an additional ldo
which will be exposed and the driver need to vote for proper phy
functionality.
Add a phandle which will be used in the driver to identify the
ldo and vote accordingly.
Change-Id: I15b3bcb031cefe037fbb0364bfb7b87d26489006
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
GLINK PKT provides a userspace interface to RPMSG GLINK through
character device node. Add the nodes and corresponding channel
devices to enable GLINK communication from userspace.
Change-Id: Ie880b3806843fcf57fbb2f77a2d77e24ee7359b6
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Add the nodes for enable qrtr communication between primary vm and
oemvm on tuna.
This adds platform devices and vdevice descriptions to start the
qrtr gunyah transport on both primary vm and oemvm device trees. This
also adds the device tree node to configure qrtr as node id 21 on oem
vm.
Change-Id: I8697478e2e1b8269aa3b93f940a8c98f03b7c9b2
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Add ipcc_mproc_n1 device tree node and entries to enable IPCC and mbox
communication between TUIVM and CDSP SecurePD on tuna TUIVM.
Change-Id: Ia38df4150a766a66cdead3c2dd60b4e6fc2fc4cd
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Add support for camera, cambistmclk and display clock controller nodes
on Kera platform. While at it, move camcc and dispcc gdsc's to real
alongwith required interconnect voting for camcc_titan_top gdsc and
updated dispcc crm property name for tuna platform.
Change-Id: I844a35d688eb4050212e11e81eae1aaa55a4a24f
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Remove invalid GPIOs and replace them with corresponding pins for Tuna
SoC.
Change-Id: I9db60c4edde97c63296380fd4df7557cf2b5d2e9
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add support for the following LCDB devicee tree properties:
"qcom,ncp-symmetry" to make NCP voltage follow LDO voltage directly.
"qcom,high-p2-blank-time-ns" to control the higher clamp threshold for
p2 minimum on time.
"qcom,low-p2-blank-time-ns" to control the lower clamp threshold for
p2 minimum on time.
"qcom,mpc-current-thr-ma" to control the mpc threshold for inductor
current after start up is done.
Change-Id: I873d177fd71da7a98aa043f1b30db7c42a6cd803
Signed-off-by: Ashok Kadavul <quic_asholnu@quicinc.com>
Add pmic overlay support which includes UI peripherals,
Volume key support, UFS sdam changes and thermal zones
changes for kera.
Change-Id: Ic46f25ed0860449b66257895bfc923f4baf6bfa5
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
