sdxkova uses PMK8550, PM7550BA and PMX75. Add SPMI slave device
and some of the peripheral devices for PMX75.
Update PMIC overlay file to add devices from these PMICs that
are common for all sdxkova platforms. Also add PM7550BA-related
configurations required for the IDP MBB platform.
Add spmi_debug_bus so that PMIC peripherals can be accessed via
debug bus on sdxkova devices where the fuse is not blown. This
is useful for debugging.
Add PMIC Glink devices and their client devices. The PMIC Glink
device with name PMIC_RTR_ADSP_APPS supports the clients: ucsi,
altmode, and battery_charger. The PMIC Glink device with name
PMIC_LOGS_ADSP_APPS supports the clients: battery_debug,
pmic_glink_debug, charger_ulog_glink, and glink_adc.
Change-Id: I6dc40cc36a46c1b34edd274655306dadd3143ebf
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Added QUPv3(I2C, SPI and UART), GPI DT nodes and
QUPv3 pinctrl support for sdxkova.
Change-Id: I55394b443be7dd2a37b04e62fa2f308ebdf67753
Signed-off-by: Krishna Chaithanya Reddy G <quic_kgangapu@quicinc.com>
This change removes the dependency of TLMM with PDC so that
it can probe without PDC. We can re-enable PDC dependency
once we validate PDC changes.
Change-Id: I3b78b6a5418ecf98675d31a8b5e47bdeeeedbd6b
Signed-off-by: Khaja Hussain Shaik Khaji <quic_kshaikkh@quicinc.com>
This change moves the APSS RSC clients under APSS RSC node
as child nodes. Earlier those were wrongly added under SOC.
Change-Id: I7e04b78a138eae18384a4ee976ff2bc0018ea30d
Signed-off-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com>
Add devicetree nodes to enable qmp communication with aop and tme.
Change-Id: I62d0020ca600820dd8ce256ee4cbe1ce0dc17b15
Signed-off-by: Vishnu Santhosh <quic_vishsant@quicinc.com>
Add the smp2p device nodes to enable smp2p communication with remote
processors. This adds the configuration for Modem on sdxkova.
Change-Id: Ibd86fcf2a589bfb9f16a645797113f0f0345c81a
Signed-off-by: Vishnu Santhosh <quic_vishsant@quicinc.com>
Currently the interconnect provider framework is expecting
the tag QCOM_ICC_TAG_ALWAYS as part of dtsi node of QUP.
In commit 481c435dd1 ("ARM: dts: qcom: sdxkova: update
interconnect providers with bcm-voter-names") interconnect
framework is not expecting the tag QCOM_ICC_TAG_ALWAYS, and
instead it is enabled by default or expects clients to override.
So, updated the QUPv3 and UART interconnects to remove the
additional interconnect tag.
Change-Id: If3780ec7156487f07cc8892a43341d1d9cb88b96
Signed-off-by: Krishna Chaithanya Reddy G <quic_kgangapu@quicinc.com>
Include IPCC test node for sdxkova, so IPCC kernel-tests can
run on sdxkova.
Change-Id: I96e4f925d62eec54455b8f03f46217fc402e43a5
Signed-off-by: Keval Kulkarni <quic_kevalbha@quicinc.com>
Signed-off-by: Khaja Hussain Shaik Khaji <quic_kshaikkh@quicinc.com>
Add ipcc node for sdxkova to enable inter processor
communication controller.
Adjust reg format for tz-log node.
Change-Id: I5519f5b8bfc02b2c85c1654a2f39c4ec61fdee9f
Signed-off-by: Keval Kulkarni <quic_kevalbha@quicinc.com>
Signed-off-by: Khaja Hussain Shaik Khaji <quic_kshaikkh@quicinc.com>
Update interconnect provider device nodes with bcm-voter-names to route
the bandwidth requests through appropriate DRV.
Add necessary clock handles to access the QoS registers.
Change-Id: I5c271682e0b3f094d85fa759e19f8a89ae8f0eff
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Add DWC3 USB controller device-tree nodes for sdxkova.
Change-Id: I9a44ad5d49dfb8bdadca04696c8580e283b5f2ec
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Add support for GCC, DEBUGCC, GDSC and CPUFREQ-HW-DEBUG nodes
for sdxkova platform. While at it, update the cpufreq default
governor to performance.
Change-Id: Icba0ba93cf82e576e7b645c247d2d0e7f0f6da3f
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Add the TLMM GPIO reserved ranges for the sdxkova platform.
The reserved range is set to <110 6> to ensure proper
allocation and avoid conflicts with other GPIOs.
Change-Id: I6b01f9c6a21f918df078dcbe078be602dd889898
Signed-off-by: Khaja Hussain Shaik Khaji <quic_kshaikkh@quicinc.com>
Add initial memory configuration and reserved memory map
for sdxkova, inline with v1.
Change-Id: I3748f7264d39b579c6cabfb5ae0ec7dbf9da3ef0
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
