On 6.6 kernel, clock-frequency flag name has been updated to
qcom,pcie-clock-frequency.
Update the clock-frequency dt flag name to qcom,pcie-clock-frequency.
Change-Id: I68c74d3b81ea65d30e7b8a2e8a432ad34d025077
Signed-off-by: Paras Sharma <quic_parass@quicinc.com>
Add charger PMIC changes to the kera variants.
While at it add ADC channels for pmic_glink_adc and
debug channels for pmic_glink_debug for kera platforms.
Change-Id: Iab9f94b44eca9365b84bc78c2666e4f66a344455
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add bob regulator node and update rpmh regulator
voltages as per the latest HW recommendations for kera.
Change-Id: I5e258e01c27f76038f3059315bfaf42f24ea6bdf
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Update S1G min/max & initial voltage for tuna-kiwi platform.
While at it make below changes
1.Disable the unused rails for tuna boards.
2. Update always-on property for L3G for RCM kiwi platform
for FMD feature.
Change-Id: I92e01d48b5c3cb9f64b6aa7be37c0ebb27f378b7
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Remove sys-therm-1 vadc channel as it is handled
in other subsystems.
Change-Id: If80f2f5ffcf0299ad15537189c5ef1337e8ae87e
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add cpufreq cycle counter register information to devicetree in a
separate node.
Change-Id: Ib9c21300cda585d4f25be12cb9527d719eb630ea
Signed-off-by: Atul Pant <quic_atulpant@quicinc.com>
Add the soc specific compatible for tuna7 llcc.
Change-Id: I33c1b2c62ae11c6d65f3c83e379da77f846d20b4
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Remove the list of GPIOs reserved for CXM UART2(111,112)
as it is no longer required.
Change-Id: I8fafe3005019e3df68ab6cf065d67f684401ecce
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Commit e3eceb0 (pinctrl:qcom:Add support for Kera SoC in pin control)
updates the UFS_RESET pin from 184 to 185. This commit updates kera
UFS 'reset-gpios' to 185 to ensure proper functioning of UFS.
Change-Id: I9b850a7c997303b467b6fea4a64bc19ec3e6372c
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Updated the IOMMU address from 0x540 to 0x140 for tuna SDC2.
Change-Id: I47e4c2d0abc710ab4048632d2b84552b5d009e8a
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
The USB D+/D- signal lines are first routed through the WCD939x USB
subsystem before connecting to the USB controller on MTP and QRD platform
for tuna. Add a phandle to the former to the USB device node. This will
allow the USB driver to control the D+/D- switches when USB 2.0
functionality is needed.
Change-Id: Ie55271923cc893f72602ecbe156617d651bef66e
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
This change adds display heap region for kera target.
Change-Id: I2634e6c673a2a4e2bcf5c6903eb9be310044562d
Signed-off-by: Sampurna Bolloju <quic_sampboll@quicinc.com>
Use alias to reduce dev mistake of not using
proper path for serial console.
Change-Id: Ie588cc39b8f9e167b323abb9901114b547c278fc
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
