Add flash, torch, and switch devices from PM8550 flash LED device to
support camera flash use cases on Sun boards.
Change-Id: Ieb78a7ab63709f04489024e8fcaf8f14de90347e
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add M31 eUSB2 and QMP SS PHY nodes to sun. Add required dependencies in
pinctrl as well for HW based SS lane detection.
Change-Id: Ib1546aa7d92853a88a05d0bbc836ec4caac40960
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Add DT bindings for SPI which provides the resource management details
for the Q2SPI geni msm driver.
Change-Id: I1142c87b437177ec7587f8c0f1a823fbdb1c7fbb
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
Enable tlmm VM mem access device tree nodes for Sun.
Change-Id: Ibb4ec4d8b4e50ba5b52b0af9346c8c6c32dfb5d2
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add SD card support for mtp/cdp/qrd sun platforms.
Change-Id: I40ea8c28354040dd7417d6401d60613226c495f4
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
The Remote Debugger driver allows a debugger running
on a host PC to communicate with a remotestub running
on peripheral subsystems.
This snapshot was taken as of msm-4.14 commit.
Change-Id: I30ef2c9b67904f80867df82552572978ab09a05c
Signed-off-by: Devender Kaushik <quic_dkaushik@quicinc.com>
Disable low power modes for sun through kernel command
line parameters.
Change-Id: Icbd6d6637f5532380048b51c5cbba5a790526c5b
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Update apps_rsc to include new tsc-distance field to the specify the
TCS distance offset for each DRV for sun. Add disp_rsc and cam_rsc
devices for RPMh communication and add new tcs-distance property for
each DRV on sun.
Change-Id: Iad900a9b60cd8f52b99f29e4db0c85397c723ecf
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Document tcs-distance property needed in devicetree for RSC devices.
This is an optional property which defines the distance between each
TCS for a DRV.
Change-Id: I8c01632597f40ff6856242b888610e61f7b3f15f
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Document v2, v3 and v4 compatible for various stats devices.
Change-Id: I5ba43732c07af93f7e4889d06503d4f96a2664f6
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Add SPS module to device tree. SPS (Smart Peripheral System)
enables the support of all BAMs in the system which provide DMA
functionality to various peripherals for SUN.
Change-Id: I4b69ad41de0a27921b5cd050b589e7ab7af406e3
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
For VM bootup the scm device needs to have memory from above 4GB, but for
PIL boot the Metadata memory needs to be limited to 32 bit. This is
because the authentication software for the metadata in the secure world
works with only 32 bit addresses. Add support for only 32 bit addresses
for PIL and memory from anywhere for other memory allocation from SCM
device.
Currently, this is being enabled for ADSP/CDSP/MSS however, this limitation
was applicable only for modem and not with ADSP/CDSP but there was some
issue observed with above 4G addresses allocated for ADSP/CDSP and it
was analyzed that it could be only issue on emulation platform and will
not observed on Silicon. So, we could revert this change for ADSP/CDSP
if the issue is not observed on Silicon.
Change-Id: I398158a76207f4ef43770ed60210d1f155263850
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Introduce bindings for the USB QMI audio offload driver. Defines the
required properties, as well as lists an example of the node definition.
Change-Id: I43a7dadc8ac45a26de00f295c0bed0ae20e6075c
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Replace the stub-regulator devices for VRM managed PMIC regulators
with rpmh-regulator devices. This ensures that consumers are able
to modify the physical state of these PMIC regulators.
Update all regulator voltage limits to match the latest hardware
guidance.
Remove references to regulator L3B since RPMh will not be providing
support for it.
Change-Id: Ieee28b3860d013837ca273c32606bf3e0b0d2a6b
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Correct the prime and silver cores mapping.
Enable the smmu's iommu-dma-addr-pool to reduce memory usage.
Enable the smmu's dma-coherent.
Change-Id: I4c28c48b59cc8cf4159969f89d7983d574921a4f
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
IMEM gets updated with Modem DSM memory region info when Modem taken out
of reset by APPS and the info is used for collection of coredumps.
Change-Id: I313d374772bcc95495e9965b7fa1f455ac36a82a
Signed-off-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Add device tree nodes for wcd usb subsystem and pmic
sdam_71 needed for usb analog audio, display functionality.
Change-Id: I35cb8e17efb1c7288330a1b125a03b23990a829b
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
