Flash LED compatible string has been updated from "qcom,pm8350c-flash-led"
to "qcom,qti-pm8350c-flash-led" in Sun. Update existing usage of the
old compatible from Pineapple dtsi files found in Sun.
Change-Id: Ib062510cd6561e57973cca336d2a5b04884ec5d8
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
The mem-buf device provides memory related services for shared memory
between host and guest VMs.
Change-Id: Iade8224fbea6985c69af9cd30d1c441983e91147
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add the secure-buffer device, which supports hypervisor operations
to change the stage 2 permissions of memory.
Change-Id: I98576bc919aecada2e7ab7bc5dfeadc8979a111d
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
USB controller device doesn't probe due to remote-endpoint depedency
with ucsi device. ucsi device won't be probed as ADSP firmware is
not being loaded. Hence remove ucsi port related remote-endpoint
configuration on pineapple.
While at it, also remove dependency on EUD driver.
Change-Id: I161afb62e63ebeeb13ee5af7b43408c697fd59d6
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Enable cluster 0 cores from the command line instead of just
core 0.
Change-Id: I26b97122d353b3979467109babfded9a095b207d
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
With 16GB of DDR, existing drivers were trying to use 6Mb as follows:
2Mb: dma_atomic_pool_init(GFP_KERNEL)
2Mb: dma_atomic_pool_init(GFP_KERNEL | GFP_DMA32)
2Mb: qcom_iommu_util::dma_atomic_pool_init
Increase the reserved size to 12Mb to leave a small margin.
Change-Id: Id9bdfcca7560d40bddf3c9c526f9e3ee69ba9174
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add the device tree properties to the smem reserved memory region that
to match allows the smem driver to match and probe accordingly.
Change-Id: I4e0bdf3d26a9d0f7cf15a569e08988dddadf8183
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Switch to enable SMMU for the USB controller on sun.
Change-Id: I9b43a167beb2ab971ce48bbc5f03bf62512addc2
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Add the psci node and change the cpu enable method to psci
on the sun SoC.
Change-Id: I86f747a87169172ac215885c6de0e19be921f99f
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Change the sun rumi dt file to compile as an overlay.
Change-Id: I56dcc5349eac12c660981da0fc75f0173b27197a
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Adjust arch timer and memtimer frequencies on the sun RUMI to stop
IRQ storms during boot.
Change-Id: Ic34a125763701ec115db82cd5ed5259fb3bd9a28
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Add tz-log node for Sun which gets updated by Resource Manager.
With out this node, device tree overlay fails.
Change-Id: I9d54da4cf32272176e12d3cd49bc21f20e688f30
Signed-off-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Add stdout to chosen node for sun SoC and set maxcpus to 1.
Change-Id: I2633e4f96f3f9cbc047334200fc42921a5f5d6f7
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Enable USB related properties for USB functionality on sun.
Change-Id: Ibb522859494c0e939b46a6b790448fc2e62bd37e
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Describe the registers of the QTB devices, and also add
devices for test purposes.
Change-Id: Ieee39df8ac89d62479a10b92c8a8c4421fcf88fc
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add ipcc and ipcc-self-ping nodes for sun SoC.
Change-Id: Ib5df260528abb33a5b25dbb1b2e22013cdcd2ee1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Unstub the camcc device so that it starts controlling HW.
Change-Id: I41c88ef6692d7f24b2bf759ac16b6af880f09cf2
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Enable global clock controller on Sun. Enable GCC GDSCs
and update PCIE, UFS, USB30 gdsc in respective device entries.
Change-Id: I48f8fdd536657104f5e2e238aed3383e58f29fd3
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add stub regulator devices for the SMPS, LDO, and BOB regulators
found on the PMIC chips which are used on Sun boards. This
ensures that consumers can use the regulators successfully.
Change-Id: I23a02c960adbb46b09c7648458d7c367636993c3
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add stub interconnect devices. This will allow consumers
to get their path and set bandwidth constraints on them.
Change-Id: I6f2adf0ba4fd5f34fc6119fd5f0a7314cc92691d
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add stub clock nodes are required for clocks client to
request, so add support for the same.
Change-Id: I9c26dcc16e90e79aaf2b7838d205f4c7c44b05bc
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
