Add pmih010x support for tuna.
While at it add sys-therm-11 for tuna.
Change-Id: Idc08213fdadb300d0eb793f422ecf9b210785db9
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add cma regions for tuivm and oemvm, inline with v1.
Change-Id: I117ad4bd3af4fb1c9c3c5bf046fdf903d3ddb99d
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add cma regions for tuivm and oemvm, inline with v2.
Change-Id: I72263dfc41eb0ecafb38bdac42e685483ba6d66c
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Update "capacity-dmips-mhz" for tuna. It is used to build Energy Model
which in turn is used by EAS to take placement decisions.
Change-Id: I7e0ad3f42d39303e044b6fbc7cfd3f76492d09de
Signed-off-by: Ankit Sharma <quic_anshar@quicinc.com>
This change adds to enable BCL2 node; adds bcl thermal zone
mitigations and cooling maps for pmih010x.
Change-Id: I4e4cef9a1d7064afd32ee1422bb2e5a23a31689a
Signed-off-by: Minghao Zhang <quic_minghao@quicinc.com>
For upstream and tvm, qup common driver uses gcc phandles which
are common in dt and to avoid qup driver probe failure, add gcc
qcom-dummycc support as they are nop. This helps in avoiding
additional logic in qup driver to not conditionalize based on
variant.
Change-Id: I770a2a3c0e31138891b3e298ccff8e2934ae91a1
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add thermal devicetree changes and thermal configuration
for tuna based on the recommendation.
Change-Id: I6904fca29794cc8f7615d5f540f613ef903b59aa
Signed-off-by: Nitesh Kumar <quic_nitekuma@quicinc.com>
Add support for platforms like ATP, CDP, MTP, QRD and RCM for TUIVM and
OEMVM on Tuna. Also, add support for additional Tuna variant.
Change-Id: Ie7a6c542c7d31db5b823ae10db714ddc43330598
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add the UFS's VCCQ2 parent regulator information so that
the software can perform load voting on this regulator.
Change-Id: I4ab420c0218a2f5c4d1849166318280e8acca6db
Signed-off-by: kamasali Satyanarayan <quic_kamasali@quicinc.com>
Add device nodes for the cpucp mailbox, cpucp logs,
and SCMI nodes for Tuna.
Change-Id: If028d941d4cb812402a6617908d1bfe7ffbb6108
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
DWC3 host and XHCI plat now communicates the maximum number
of interrupters the XHCI HCD will allocate. Since platforms
only require a limited number of interrupters (i.e. 3) make
sure XHCI doesn't allocate more than is required.
Change-Id: I9e8592c8f62562f44c760571ac1505ab80b05fc6
Signed-off-by: Jigyanshu Mani <quic_jmani@quicinc.com>
Add chipinfo region as ext-region for cpusysvm.
Change-Id: I1200495f5bb98ecbdfbba5fcdb3cb45708f63c0c
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add NAND controller support for sdxkova and its platforms.
Change-Id: I14f55288c2deaca96011276f1c876b7099062eef
Signed-off-by: Madhusudhan Sana <quic_msana@quicinc.com>
Modify capacity of each cluster. The "capacity-dmips-mhz" and
"dynamic-power-coefficient" are used to build Energy Model
which in turn is used by EAS to take placement decisions.
Change-Id: Ia54b1e43d0f98cac2ec68bc6d4a387d43c8c9d3f
Signed-off-by: Ankit Sharma <quic_anshar@quicinc.com>
