Add APQ variant's soc id for ParrotPRO.
Change-Id: If7a807825c441b8dd7b946f76492f61ff3aaf88e
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
(cherry picked from commit 44899fd803df1ce177f03638477a05a2dc59ee9d)
Add test-dbl-tuivm, test-msgq-tuivm and tlmm-vm-test
nodes for parrot and parrot vm.
Change-Id: I15e3312cf74f9ddae27b93a941e7d6c7df844c9b
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
(cherry picked from commit 357667d318)
Memory exhaustion observed with the 6MB hyp memory
while enabling support for AVF. Also there may be
other usecases which might required more MB to run.
So increase hyp mem to 14MB to avoid nomem issues.
Change-Id: I092104e34b13cbc15506c2a3a83bdd3e9420af46
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
Add interconnect devices for camnoc_virt, ipa_virt, mc_virt,
dc_noc, gem_noc, config_noc, system_noc, aggre1_noc and
mmss_noc. This will allow consumers to get their
path and set bandwidth constraints on them.
Change-Id: I8c2eb0b8a63252cbfcfe44355ad9b4421c8aee5c
Signed-off-by: Chintan Kothari <quic_ckothari@quicinc.com>
Add support for cpufreq_hw, clock controller nodes and their
corresponding gdsc's for SM6150.
Change-Id: I7d64cbe80eb7f10277acce0a0c91fb788c3c99dc
Signed-off-by: Chintan Kothari <quic_ckothari@quicinc.com>
Split iomemory-ranges for parrot-vm to be inline
with AC aperture settings.
Change-Id: I6dbf890bd607d916d2429577af6ad164e3cd51db
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
(cherry picked from commit 0e84ac98c6)
Increase dvdd initial voltage from 1.06v to 1.09v to avoid
voltage drop issue caused by IR on tuna QRD target.
Change-Id: I23bc8d44ec13260b9281e3c08968daa5e97fafb6
Signed-off-by: Lei Chen <quic_chenlei@quicinc.com>
Signed-off-by: lnxdisplay <lnxdisplay@localhost>
Add ulps and roi support for 120hz, 90hz & 60hz
VTDR6130 panel on Kera target.
Change-Id: I21bf599aadc6d4f10d25c3f1d232c1ba37a0d8b1
Signed-off-by: Abhinav Saurabh <quic_abhisaur@quicinc.com>
Signed-off-by: lnxdisplay <lnxdisplay@localhost>
This update adjusts the PHY timings for the VTDR command mode panel on
Kera RCM/CDP platforms based on the required FPS, following the removal
of the qcom,mdss-dsi-panel-clockrate hardcoding. Previously, the
hardcoding resulted in uniform panel PHY timings across all FPS.
Some Kera RCMs have exhibited screen freeze issues when switching from
120 FPS to 60 FPS in command mode after the removal of the hardcoded
clock rate. Interestingly, this issue has not been observed on Kera
CDPs and other platforms, suggesting potential underlying hardware
differences between CDPs and RCMs that necessitate proper tuning of
panel PHY timings.
Update the panel PHY timings to fix this.
Fixes: I1c3c77eed76 ("ARM: dts: msm: remove hard coded panel clk rate
for kera RCM").
Change-Id: Iffd1d5da485d6961baa49ff96a65882c491a8ff6
Signed-off-by: Abhinav Saurabh <quic_abhisaur@quicinc.com>
Signed-off-by: lnxdisplay <lnxdisplay@localhost>
Add test-dbl-tuivm, test-msgq-tuivm and tlmm-vm-test
nodes for parrot and parrot vm.
Change-Id: I15e3312cf74f9ddae27b93a941e7d6c7df844c9b
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Split iomemory-ranges for parrot-vm to be inline
with AC aperture settings.
Change-Id: I6dbf890bd607d916d2429577af6ad164e3cd51db
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
Add smp2p, qmp_aop and aoss_qmp device tree node to support
SM6150 platform.
Change-Id: Iff80c2e40ebecd26f2c649007e79506984bfc35b
Signed-off-by: Dhaval Radiya <quic_dradiya@quicinc.com>
