Change the pcie devicetree node names to be in line with the
pci-bus.yaml format.
Change-Id: I46b56b7aee492c746554ac2a3575cd11c2108efb
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Change the pcie devicetree node names to be in line with the
pci-bus.yaml format.
Change-Id: Ic7d5158f988163e6053df27aa8084a1a1f5b8f0d
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Rename node name for modem-diag node and add memory-region
for modem-etr1 on sun.
Change-Id: I8430a422d3b2bbb2ea7ecd489b675bd946ef29c1
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Increased tre size to 1024 for i2c camera instance.
Change-Id: I60a7cd5bff7689a72fb6c82b224fb8ddb189205c
Signed-off-by: Anil Veshala Veshala <quic_aveshala@quicinc.com>
on KP4.0
On KP4.0 Pineapple changes for qupv3 doesn't have latest changes
when compared to KP3.0, updated all missing changes for i2c/i3c.
Change-Id: Iada78f857dde1f02565111fa92e5ad64ccd6b553
Signed-off-by: Anil Veshala Veshala <quic_aveshala@quicinc.com>
Add device tree support for v8 Power Grid on MTP, CDP, QRD
platforms for Sun SoC.
Change-Id: Iceac9ff05e97fb384f1bb0e641ad6ec568d75076
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Add NFC support for MTP, CDP platforms on Sun SoC.
Change-Id: I93755e3861d5d075f020ea5856caed56d57db922
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Add v1 and v2 DT support for APQ variant on MTP, CDP
and QRD platforms.
Change-Id: Ifb447f14db06038d537951bd9b37f279c4757c0b
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Add VADC channels provided by pmk8550 that are used by thermal clients
on Sun. Also, add the corresponding thermal zone devices.
Change-Id: Ia3113ff6f5c76cd7f4582808b1672d3ddecadab7
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Currently, PM8550VS and PM8550VE ADC channels are using old macros for
register address. Update device nodes so that they use the new
PM8550VX_ADC5_GEN3_<channel>(sid) macros.
Change-Id: I151d965a3eb03ad318deb21dea47170e5806f37a
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add tlmm VM test driver device tree support for Sun.
Change-Id: I131fcdaec94b6551d99753108276cfc8126187db
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add CPU hotplug and pause cooling device to hotplug or pause any
CPU under thermal conditions on sun. Added the respective pause and
hotplug cooling maps to the CPUs and added cooling-cells property for
each CPU.
Change-Id: I6753ee0d77511d58ba313707381f2e0b9114eeed
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Make changes to enable IPA SMP2P nodes for sun to
communicate with modem.
Change-Id: Ia2cf79f51ea3d164d82be5db53aa2163e0c5f799
Signed-off-by: Chaitanya Pratapa <quic_cpratapa@quicinc.com>
Add flash, torch, and switch devices from PM8550 flash LED device to
support camera flash use cases on Sun boards.
Change-Id: Ieb78a7ab63709f04489024e8fcaf8f14de90347e
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add M31 eUSB2 and QMP SS PHY nodes to sun. Add required dependencies in
pinctrl as well for HW based SS lane detection.
Change-Id: Ib1546aa7d92853a88a05d0bbc836ec4caac40960
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
For upstream and tvm qup common driver uses gcc phandles which
are common in dt and to avoid qup driver probe failure qcom-dummycc
is added as they are nop. This helps in avoiding additional logic
in qup driver to not conditionalize based on variant.
Change-Id: Ie91b01b583a4482d8fa5e6eb2922a8e914876657
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Enable tlmm VM mem access device tree nodes for Sun.
Change-Id: Ibb4ec4d8b4e50ba5b52b0af9346c8c6c32dfb5d2
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
When this "qcom,uses_level_shifter" DT entry is present
but "qcom,external-fb-clk" is not present, the SD card's
HS50 mode is run at 37.5MHz clock. This is to work around
a latency issue caused by the addition of the Level Shifter
logic. In order to use the 50MHz clock in HS50 mode, there
are two ways:
- Keep "qcom,uses_level_shifter" and "qcom,external-fb-clk"
and make sure the Feedback Clock (FB CLK) connection between
the Level Shifter and the MSM must be good.
- Remove "qcom,uses_level_shifter" from DT.
Please note that the "qcom,external-fb-clk" depends on
"qcom,uses_level_shifter", only set "qcom,external-fb-clk"
would not take effect.
Change-Id: Ib3a4cf5c9c20e2094556c3196d91b7e9723e0a1e
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Due to RUMI limitations only HS mode is supported on RUMI for SD cards,
add DT flag is_rumi for sun RUMI to enable SD card on HS mode.
Change-Id: Ib962ddb24cf89f2058760d1cfbff80db058fd216
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Add SD card support for mtp/cdp/qrd sun platforms.
Change-Id: I40ea8c28354040dd7417d6401d60613226c495f4
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
The Remote Debugger driver allows a debugger running
on a host PC to communicate with a remotestub running
on peripheral subsystems.
This snapshot was taken as of msm-4.14 commit.
Change-Id: I30ef2c9b67904f80867df82552572978ab09a05c
Signed-off-by: Devender Kaushik <quic_dkaushik@quicinc.com>
