Add interconnect device bindings. These devices can be used to
describe any RPMH and NoC based interconnect devices.
Change-Id: Ic9a21d11bb3ce92ffb0cde91739990441673861d
Signed-off-by: Veera Vegivada <quic_vvegivad@quicinc.com>
Signed-off-by: Aryan Modi <quic_aryamodi@quicinc.com>
Added smem, syscon and dependent nodes for SM6150.
Change-Id: Icb9485e46c8720919310bc0e2560bd51b23f5dec
Signed-off-by: Asit Shah <quic_asitshah@quicinc.com>
Add support for TLMM pinctrl on SM6150 platform.
Change-Id: I45dfd3d84900ed4b24ecda47462c2c5178bbb02f
Signed-off-by: Kunal Singh Ranawat <quic_kranawat@quicinc.com>
Add bindings for sm6150 llcc node.
Change-Id: I4f239f190c01110e59c1081ccf0a57cb1631fb95
Signed-off-by: Asit Shah <quic_asitshah@quicinc.com>
(cherry picked from commit 4173e882bd59e39d8b698fed8b92417231c98e4e)
Add the Level Shifter's external feedback clock entry to support
the SD card HS50 mode running at 50MHz.
By default, the Sun platforms use the Level Shifter devices with
external feedback clock signal connects back to the MSM in order
for the HS50 mode to work at 50MHz. Without the external feedback
clock, the HS50 mode works at reduced frequency at 37.5MHz.
Change-Id: I56c61411d7f792a389fa85661fce7fa5074e2c9f
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
WLAN has a requirement to trigger a PBS sequence for XO calibration
for factory testing. To support this, expose a new register under
PMK8550 SDAM2 for clients to write input data into and a new PBS
regulator on which clients can vote to trigger the PBS sequence.
Change-Id: I0e4882d842ea57def4dfdfe4baa5e606a3847f40
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
WLAN has a requirement to trigger a PBS sequence for XO
calibration for factory testing. As part of this feature
expose a new register under PMK8550 SDAM2, which will
be used by PBS for reading XO trims settings.
Change-Id: I620b2d9d0ca6b7452f693ff665ddf995f17e4e2c
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
WLAN has a requirement to trigger a PBS sequence for XO calibration
for factory testing. To support this, expose a new register under
PMK8550 SDAM2 for clients to write input data into and a new PBS
regulator on which clients can vote to trigger the PBS sequence.
Change-Id: Ia314c8cba7a6205943b99e7530990ea6dde8b09c
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
Correct the port mask of mbhc port.
Since the WCD_SWR_TX DATA0 voltage was incorrect
with default setting, but was correct when
the ADC_LP was running in the swrm bus 9.6mhz,
So copy the SWR_UC0(9.6mhz) to SWR_UC1(4.8mhz).
Change-Id: I3638349a6ebec06b8f4a828498e1285579361e45
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Add ldo-ocp notifier support for tuna for platforms.
Change-Id: I46c1feb2f4ff2da3945f9ad445eb5d99f81f7af4
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add device tree bindings for arm,arch-cache node.
Change-Id: I46acfdd171e297368d6bedc431af7dd1270909f8
Signed-off-by: Asit Shah <quic_asitshah@quicinc.com>
Only add wcn-bt-ext for enabling second bt backend for needed dtsi file.
Change-Id: I42ca1840019a9db7d02ac39092f15dd438ea334f
Signed-off-by: MingShu Pang <quic_mpang@quicinc.com>
Remove lpass_bt_swr in ssr devs as bt_swr is disabled in
Kera cdp variant.
Change-Id: Idd149e79b09c1cd3db57100887c3e187bd8420c8
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Add wcd usbss node for CDP to detect mic from wcd usbss driver.
Change-Id: Ic7fbab156a2dda2185a80c96d6589764ca66b57d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
This change adds the entries of qusb phys and
usb bam in yaml format.
Change-Id: I5697f28cf786ab6cc61c462a164ff4b0e4e68aac
Signed-off-by: Rajkumar Patel <quic_rajkpate@quicinc.com>
Add devicetree support for Tuna7 and TunaP SoC.
Change-Id: I5f94559c66f00bcb746fc05f7c445a8e2501d862
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
(cherry picked from commit b0ed9373e7)
