Move core_reset for SDC2 from platform-specific files to the tuna SoC.
This change ensures that the reset properties are managed centrally in
the SoC file, reducing redundancy and improving maintainability.
Change-Id: If8e6bcdac9b05275d20f1d205dfc7e6461d39b72
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Mark gpucc clock node as GenPD provider and disable the
graphics GDSC regulator nodes. Update gxclkctl
node to add support for gx_clkctl_gx_gdsc power domain.
While at it, keep the gdsc regulator nodes as it is on rumi platform.
Change-Id: If205c2116841ff3a11ebce4e06ca3067c4a8721b
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Mark videocc clock node as GenPD provider and disable the
video GDSC regulator nodes for tuna platform.
While at it, keep the gdsc regulator nodes as it is on rumi platform.
Change-Id: I8e8fc066ea54f16ccbc73b9b8705881b27d4d112
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add the device-tree node for the mem-offline driver to enable
memory offlining and convey the sizes of the offlineable memory.
Describe the communication channel used to communicate with the
firmware which supports onlining and offlining of memory.
Change-Id: I448969b10b0e29f44ca2b7949472ea21c63ffb3a
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Describe the properties and msgqs of the mem-buf device.
Change-Id: Ie05f273fd3747d4bf7a071ad5addae285ab612b4
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Describe the properties and msgqs of the mem-buf device.
Change-Id: I66e4847e8c141c917f3bda22663fc60e2634917a
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add ddr-regions device tree node in Tuna and Kera to optimize
boot-up time as firmware will look for this node during boot
and if it finds it early, it will save some time in bootup.
Change-Id: If3d6f3be7331870b5ecec9834de1dbebfbb6c22f
Signed-off-by: Shivendra Pratap <quic_spratap@quicinc.com>
Add support for cpufreq_hw and cpufreq_hw_debug nodes on tuna platform.
While at it, set the default governor to performance on tuna platform.
Change-Id: I2a0b89d51a16c479da35ca60286b2df18c3fba55
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Add initial set of DCVS device nodes for Tuna. This
includes the QCOM DCVS devices, PMU device memlat device
nodes and mapping tables, and bwmon device nodes.
Change-Id: I3abb2b912f22198f375635f0214bdbd0e71d5d5a
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
Mark dispcc clock node as GenPD provider and disable the
display GDSC regulator nodes for tuna platform.
While at it, keep the gdsc regulator nodes as it is on rumi platform.
Change-Id: Ia1ee65d9958ba8ab6cb00616a09cd5b2304bc31a
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Remove #address-cells and #size-cells properties from the cpucp
node as they are identical to those in the parent node,
allowing them to be inherited.
Change-Id: Ief29334722acf4e525d4d510a54840c26d3e594a
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
Add RPMH regulator devices for SMPS, LDO regulators,
found on the PMIC chips used on tuna boards, to ensure that
consumers are able to modify the physical state of these regulators.
Change-Id: Ie30bbc8ab04d75246a5ff902841981c907dc9fca
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add support for rpmh clock controller nodes on TUNA platform.
While at it, keep rpmhcc node as dummy for TUNA rumi platform.
Change-Id: I97b2a42df7886295efd8b4a176257fe45a571bae
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Update "capacity-dmips-mhz" for tuna. It is used to build Energy Model
which in turn is used by EAS to take placement decisions.
Change-Id: I7e0ad3f42d39303e044b6fbc7cfd3f76492d09de
Signed-off-by: Ankit Sharma <quic_anshar@quicinc.com>
