Set regulator-always-on for VDD_MMCX and VDD_MXC on Sun
RUMI. This ensures that clock controller register values
are maintained since RUMI isn't simulating register
retention across VDD_MMCX or VDD_MXC power collapse.
Change-Id: I5adaa243066df64f6f04f569a05eb124734d7611
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Qualcomm Technologies, Inc. AMOLED ECM provides a method to measure
OLED display power/current consumption. Add the bindings necessary to
describe it.
This is a snapshot of qcom,amoled-ecm.yaml taken as of qcom-6.1
commit f2d83cefcff8 ("dt-bindings: qcom,amoled-ecm: add
display-panels property").
Change-Id: If2644e7f2a6ee39c7a2c866377012bbb208fd75b
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add bindings for the I2C PMIC Controller. This device handles
interrupts from an I2C PMIC and supports various subnodes which
each correspond to a PMIC peripheral (e.g. LDO regulator, GPIO,
etc).
Change-Id: I83528bd1239f1eb645f17a579216edc616ff2fcd
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Remove the usb-role-switch property for pineapple target.
USB SW driver will assume that the USB cable is connected and
enumerate w/the PC.
Change-Id: I6f2f1b292792bc064722fdeff3807ea4c3fa5a53
Signed-off-by: Bruce Levy <quic_blevy@quicinc.com>
Flash LED compatible string has been updated from "qcom,pm8350c-flash-led"
to "qcom,qti-pm8350c-flash-led" in Sun. Update existing usage of the
old compatible from Pineapple dtsi files found in Sun.
Change-Id: Ib062510cd6561e57973cca336d2a5b04884ec5d8
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Flash LED device provides support for the clients to turn ON/OFF LED
channels in different modes (flash/torch) individually or as a group.
Add the bindings necessary to describe it.
This is a snapshot taken as of qcom-6.1 branch
commit b8790c7e1f77 ("dt-bindings: leds: leds-qti-flash: Add
support for external LED setup").
Change-Id: Icbdcb3aa794d999b2edb9995f73b00fe4ccb34d1
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add the bindings for the glink_pkt driver in YAML.
Change-Id: I666732ccc56c3067187f65926cf4ec5d5645a9cc
Signed-off-by: leihan <quic_leihan@quicinc.com>
Update memory map to V6, from a baseline of V4.
Change-Id: I167de96b3a2f199188a4d8c995aa49ef6b83fee1
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
make dt_binding_check outputs the following warning for the file
qcom,stub-regulator.yaml:
Documentation/devicetree/bindings/regulator/
qcom,stub-regulator.example.dtb:
regulator-l1: 'regulator-max-microvolt', 'regulator-min-microvolt',
'regulator-name' do not match any of the regexes: 'pinctrl-[0-9]+'
This occurs because both of these are specified:
* allOf:
- $ref: "regulator.yaml#"
* additionalProperties: false
Fix this warning by switching the latter to:
unevaluatedProperties: false
Change-Id: I5e0c9eb9e6a0638464db5d084bd008df357505d6
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add bindings for regulator proxy consumers which can be used to
enforce minimum voltage, current, and enable state of regulators
when a board is booting up.
Change-Id: I045faf871af168e5ace707f434e0317a176a16fc
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add a bindings documentation file for QTI regulator over-current
(OCP) notifier devices. These devices can be used to monitor and
notifier consumers of regulator OCP and alarm events on certain
Qualcomm Technologies, Inc. PMICs.
A regulator alarm event occurs when the output voltage droops due
to excessive current consumption which is lower than the over-
current protection threshold.
Change-Id: Id86cf62144c6e9f970cd09b7fe7a93ab40ef6cd8
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Modify the fixed-regulator binding to include the compatible
string "qti-regulator-fixed". This is helpful in situations
where proxy consumer voting or debug control features are
needed.
Change-Id: Icf4e6012a0994ff2467ee8a7af036bb97c352fce
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
