Add support for the following LCDB devicee tree properties:
"qcom,ncp-symmetry" to make NCP voltage follow LDO voltage directly.
"qcom,high-p2-blank-time-ns" to control the higher clamp threshold for
p2 minimum on time.
"qcom,low-p2-blank-time-ns" to control the lower clamp threshold for
p2 minimum on time.
"qcom,mpc-current-thr-ma" to control the mpc threshold for inductor
current after start up is done.
Change-Id: I873d177fd71da7a98aa043f1b30db7c42a6cd803
Signed-off-by: Ashok Kadavul <quic_asholnu@quicinc.com>
Add pmic overlay support which includes UI peripherals,
Volume key support, UFS sdam changes and thermal zones
changes for kera.
Change-Id: Ic46f25ed0860449b66257895bfc923f4baf6bfa5
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Commit 95fd342 (pinctrl: qcom: Add missing pins for Tuna SoC and
update egpio) updates the UFS_RESET pin from 187 to 191. This commit
updates tuna UFS 'reset-gpios' to 191 to ensure proper functioning of
UFS.
Change-Id: I3e7720449ca439b8ea2c0364137408d8d91a5701
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Add pmic-glink support and its clients: -
1.ucsi.
2.qti-battery-charger.
3.altmode.
For debug support enable other clients like: -
1.glink-adc.
2.charger-ulog.
3.glink-spmi-regmap.
4.battery-debug.
Change-Id: Ida1252a029918ce53bd97ba9fcbdea89e253a774
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add the "gcc_cfg_noc_pcie_anoc_ahb_clk" clock for tuna.
Change-Id: Ib023883dc4aac18e024aa8f0250de7aa5ad2b91a
Signed-off-by: Paras Sharma <quic_parass@quicinc.com>
Add support for LowSVS on ICC for soccp.
Change-Id: Ic845482060c91edf4e9bab3f2248dd6299f43194
Signed-off-by: Auditya Bhattaram <quic_audityab@quicinc.com>
For upstream and tvm, qup common driver uses gcc phandles which
are common in dt and to avoid qup driver probe failure, add gcc
qcom-dummycc support as they are nop. This helps in avoiding
additional logic in qup driver to not conditionalize based on
variant.
Change-Id: I00c3c59116519822be0368511499874951d0d882
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add Camera, Display, PCIe CESTA nodes for tuna. Also disable
them in RUMI till validations are completed.
Also rename the syscon device to avoid naming conflicts.
Change-Id: Ia8238c95b18a9992efe34e34d062e3835b501dcf
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Describe the register, interrupts, and settings of the arm-smmu device.
Change-Id: I7a2be4e5b344a40c42657e5d03f2bc88696f29c1
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
In this change EUSB_1P2 is added for eusb_phy and Refgen support
is added for SS Phy.
Change-Id: I1d6726882725c958178f0ad43bbd0ae264cb6046
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
The GSI event buffers are required for the various GSI related
usecases which are excercised from the dwc3 glue driver.
Add the number of event buffers along with the register offsets
defined.
Change-Id: I07bd9bb0c319392657070b6c338ddc0edf442934
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Add support for CPUSYS_VM loading for parrot and
ravelin targets.
Change-Id: I501768800e705cf0a7fdec60264b88555dc5a4b9
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
