Add thermal devicetree changes and thermal configuration
for kera based on the recommendation.
Change-Id: I8c1ff2a1da70359b5d8d84959b0ad30c6d37be93
Signed-off-by: Nitesh Kumar <quic_nitekuma@quicinc.com>
Add SPS module to device tree. SPS (Smart Peripheral System)
enables the support of all BAMs in the system which provide DMA
functionality to various peripherals for kera.
Change-Id: I606567fddd7af1f3b724d6a2ea9555d986efe866
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
Add QUPv3(I2C, SPI and UART) and GPI DT nodes on kera.
Change-Id: I3d0db10cd90a59500b29aade5cb9e4017395a1a0
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
As now interconnect changes are in place, add interconnect voting
for remote processors.
Change-Id: I8a1016f0fe760b49aa88dd51bbb00ef7fdf785fb
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Add support for camera, cambistmclk and display clock controller nodes
on Kera platform. While at it, move camcc and dispcc gdsc's to real
alongwith required interconnect voting for camcc_titan_top gdsc and
updated dispcc crm property name for tuna platform.
Change-Id: I844a35d688eb4050212e11e81eae1aaa55a4a24f
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Add pmic-glink support and its clients: -
1.ucsi.
2.qti-battery-charger.
3.altmode.
For debug support enable other clients like: -
1.glink-adc.
2.charger-ulog.
3.glink-spmi-regmap.
4.battery-debug.
Change-Id: Ida1252a029918ce53bd97ba9fcbdea89e253a774
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add interconnect devices for clk_virt_noc, mc_virt_noc,
aggre1_noc, aggre2_noc, cnoc_cfg_noc, cnoc_main_noc, gem_noc,
lpass_ag_noc, lpass_lpiaon_noc, lpass_lpicx_noc, mmss_noc,
nsp_noc, pcie_anoc and system_noc. This will allow consumers
to get their path and set bandwidth constraints on them.
Change-Id: I99812ef866f12c4a3d4b4ee9cf0dd809c946a64f
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Add support for VIDEO clock controller and move corresponding gdsc's from
dummy to real on Kera platform.
Change-Id: I830ceb12fb979613401859313518d9e4de67e674
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add support for GCC and TCSRCC on Kera platform. While at it,
move the corresponding GDSC's to real.
Change-Id: I1ecf7e1ec14afc71a9fc228c636668d9052ba14b
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Added idle states for CPUs and CPU clusters, and PSCI device
to enable CPUs to enter deeper LPMs.
Disabled the idle states till Rumi validations are done.
Additionally. updated APPS RSC device to be in cluster power domain
to handle RSC activities when cluster is powering off.
Change-Id: Ic41e219c5c4dabe29f9ac787010ea09c5c123534
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Add the device-tree node for the mem-offline driver to enable
memory offlining and convey the sizes of the offlineable memory.
Describe the communication channel used to communicate with the
firmware which supports onlining and offlining of memory.
Change-Id: I6c7868545fe7601d3cc2c6d5ea95c980046c52b4
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
The mem-buf device provides memory related services for shared
memory between host and guest VMs.
Change-Id: Ib29a426101ef274106b71ef613ca83f1577cf142
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add spmi-pmic-arb devices for the primary and secondary SPMI buses
found on kera. The primary bus operates at 19.2 MHz and is used
for most of the PMICs. The secondary bus operates at 4.8 MHz
and is used exclusively for charging PMICs. Note that the
secondary bus is not used so it is kept disabled.
Add SPMI debug device and associated child devices for the primary
SPMI interface. This provides consumers with unrestricted access
to the PMIC registers on pre-production devices. This helps
make debugging easier.
Change-Id: Idbb39999b00dd296419eb570b30083e208cf2bce
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add device nodes for the cpucp mailbox, cpucp logs,
and SCMI nodes for Kera.
Change-Id: Ia787f5f2b6fd739df0be380946beadef1963a0e9
Signed-off-by: Sayantan Chakraborty <quic_saycha@quicinc.com>
Add device-tree nodes required to support trustedvm and oemvm on Kera.
Change-Id: I7b978c5c166a4e00dcbc68c1ef6884f9ddeba72c
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add chipinfo region as ext-region for cpusysvm for Kera.
Change-Id: Id353eece5d4b825c75775f1c5be7201260007c1c
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
