Add tlmm VM test driver device tree support for Sun.
Change-Id: I131fcdaec94b6551d99753108276cfc8126187db
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add CPU hotplug and pause cooling device to hotplug or pause any
CPU under thermal conditions on sun. Added the respective pause and
hotplug cooling maps to the CPUs and added cooling-cells property for
each CPU.
Change-Id: I6753ee0d77511d58ba313707381f2e0b9114eeed
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Make changes to enable IPA SMP2P nodes for sun to
communicate with modem.
Change-Id: Ia2cf79f51ea3d164d82be5db53aa2163e0c5f799
Signed-off-by: Chaitanya Pratapa <quic_cpratapa@quicinc.com>
Add flash, torch, and switch devices from PM8550 flash LED device to
support camera flash use cases on Sun boards.
Change-Id: Ieb78a7ab63709f04489024e8fcaf8f14de90347e
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add M31 eUSB2 and QMP SS PHY nodes to sun. Add required dependencies in
pinctrl as well for HW based SS lane detection.
Change-Id: Ib1546aa7d92853a88a05d0bbc836ec4caac40960
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
For upstream and tvm qup common driver uses gcc phandles which
are common in dt and to avoid qup driver probe failure qcom-dummycc
is added as they are nop. This helps in avoiding additional logic
in qup driver to not conditionalize based on variant.
Change-Id: Ie91b01b583a4482d8fa5e6eb2922a8e914876657
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Enable tlmm VM mem access device tree nodes for Sun.
Change-Id: Ibb4ec4d8b4e50ba5b52b0af9346c8c6c32dfb5d2
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
When this "qcom,uses_level_shifter" DT entry is present
but "qcom,external-fb-clk" is not present, the SD card's
HS50 mode is run at 37.5MHz clock. This is to work around
a latency issue caused by the addition of the Level Shifter
logic. In order to use the 50MHz clock in HS50 mode, there
are two ways:
- Keep "qcom,uses_level_shifter" and "qcom,external-fb-clk"
and make sure the Feedback Clock (FB CLK) connection between
the Level Shifter and the MSM must be good.
- Remove "qcom,uses_level_shifter" from DT.
Please note that the "qcom,external-fb-clk" depends on
"qcom,uses_level_shifter", only set "qcom,external-fb-clk"
would not take effect.
Change-Id: Ib3a4cf5c9c20e2094556c3196d91b7e9723e0a1e
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Due to RUMI limitations only HS mode is supported on RUMI for SD cards,
add DT flag is_rumi for sun RUMI to enable SD card on HS mode.
Change-Id: Ib962ddb24cf89f2058760d1cfbff80db058fd216
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Add SD card support for mtp/cdp/qrd sun platforms.
Change-Id: I40ea8c28354040dd7417d6401d60613226c495f4
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
The Remote Debugger driver allows a debugger running
on a host PC to communicate with a remotestub running
on peripheral subsystems.
This snapshot was taken as of msm-4.14 commit.
Change-Id: I30ef2c9b67904f80867df82552572978ab09a05c
Signed-off-by: Devender Kaushik <quic_dkaushik@quicinc.com>
Disable low power modes for sun through kernel command
line parameters.
Change-Id: Icbd6d6637f5532380048b51c5cbba5a790526c5b
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Update apps_rsc to include new tsc-distance field to the specify the
TCS distance offset for each DRV for sun. Add disp_rsc and cam_rsc
devices for RPMh communication and add new tcs-distance property for
each DRV on sun.
Change-Id: Iad900a9b60cd8f52b99f29e4db0c85397c723ecf
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Add SPS module to device tree. SPS (Smart Peripheral System)
enables the support of all BAMs in the system which provide DMA
functionality to various peripherals for SUN.
Change-Id: I4b69ad41de0a27921b5cd050b589e7ab7af406e3
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
For VM bootup the scm device needs to have memory from above 4GB, but for
PIL boot the Metadata memory needs to be limited to 32 bit. This is
because the authentication software for the metadata in the secure world
works with only 32 bit addresses. Add support for only 32 bit addresses
for PIL and memory from anywhere for other memory allocation from SCM
device.
Currently, this is being enabled for ADSP/CDSP/MSS however, this limitation
was applicable only for modem and not with ADSP/CDSP but there was some
issue observed with above 4G addresses allocated for ADSP/CDSP and it
was analyzed that it could be only issue on emulation platform and will
not observed on Silicon. So, we could revert this change for ADSP/CDSP
if the issue is not observed on Silicon.
Change-Id: I398158a76207f4ef43770ed60210d1f155263850
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
