In this change removing wcd node from qrd platform
because in qrd we have Tambora not Harmonium.
Change-Id: Iac222e0d201e9126523d2540cddeb8db5a758e9f
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Update correct cpu sensor to cpu pause mapping for kera.
Change-Id: I56d72cb0042d957b59ecd8c9c7ce01e978982a0a
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
Add show-resume-irqs feature to show the irq number that triggered
suspend exit.
Change-Id: I54c59bdc1ae476ca7a86fd34976744eb3db6dcf9
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Add record in audio-routes for tuna7
where it is missing for record over AATC.
With this can record using AATC.
Change-Id: I9a76e16d5dc8168a11411ce715559350e6cc0c1f
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
This change adds a new third cooling device node to support
BW mitigation request and updates existing cooling device
node name in dtsi to remove qcom, prefix so it is considered
as single node and not two due to comma separated while
parsing it in csv format.
Change-Id: I341a2412159d2af6123a3bc4f2323a38b7955b62
Add the interconnect voting node for canoe kiwi/peach, used
for bus bandwidth voting.
Change-Id: I4c1828ec5d6e8e8d2298f51f926338f977283a7e
CRs-Fixed: 4036509
Update cpu pause mappings to cpu tsens sensors for tuna.
Change-Id: I998e4e916e8f552d2705cd51b1d6053070fc2470
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
- Added DT support to ravelin 4GB DDR IDP and 4GB QRD targets.
- Added all board IDs into single file.
Change-Id: Ibc70a684c8867b184ada4f8c339d394c787ec19c
Currently address and size cell property was set to 1, due to
that IOVA range that gets created was out of our expected range.
This change fixes size-cells and address-cells properties of
cnss_pci node to 2 on Canoe kiwi device tree.
Change-Id: I03d193fe50f3a17995c5a4b0eacd13b6c749e9f4
CRs-Fixed: 4048012
modify the include files for kera iot dts.
Change-Id: Ia3b7d66bc29d9ea68a71eedd2131aa088d773319
Signed-off-by: Bhasker Reddy Komatireddy <quic_kbhasker@quicinc.com>
Enable idle states for kera VM to enable VCPUs to enter LPM
when no load is running on them.
Change-Id: I0e01f36557fedf68a7beb152025ab14b66fff7dc
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Add device to show wakeup irq during system resume.
Change-Id: I1add0f44cd1773b5f61afbfc25f2c70f3323ceda
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Add show-resume-irqs device to show the wakeup irq after system
resume.
Change-Id: I41b742c4251974580c931b7f3c0530aa7fe04333
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Update ESI affinity mask in tuna device tree for UFS
performance reasons.
Change-Id: Ie06355e2d2604553da0f1e72b6d46032c55cdcf4
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Update the gcc and display clock controllers removing the tuna 1.0 to
align with the latest clock plan updates for Tuna.
Change-Id: Ib8e9245fc2c1ca90ad3cf8ad614bbe3061bafaeb
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Update frequency plan as per the latest recommendation.
Change-Id: I5c904b148f149f094dea735ba0a975862538dad6
Signed-off-by: SIVA MULLATI <quic_smullati@quicinc.com>
Sun HDK platform is expected to work without the GNSS board (which also
holds PMR735D) being attached. If the board is not attached,
regulator-ocp-notifier probe may fail as it references some regulators
on PMR735D which do not get probed.
Remove those regulator references from regulator-ocp-notifier as they
are not strictly necessary under it.
Change-Id: Ie6f35a9c6142fe54d7191f9a392074f2e39b2bee
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Add mode voting support for S2B for tuna platforms.
Update the retention threshold to 50ma as per the HW
recommendations.
UFS needs to do mode vote on vccq parent, add mode vote
for S2B for tuna.
Change-Id: I3101f3f1fb0255bdee94d4b854f7b8c73186a035
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add RET mode support for L2G/L3G for tuna platforms as per
the sleep setting recommendation.
While at it set init mode as LPM for L3G and L6K
regulators. As clients always vote for 0 load, the
regulator framework will not apply it and the HPM
init-mode will not change, leading to higher power
consumption. So update the LPM for L3G and L6K regulators.
Change-Id: I5b210ac3e9ffee94889c2390becfaa5eb6c235ab
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add pcie and display CRM voters for kera.
This will allow interconnect providers to target their
votes on CESTA DRV for meeting cesta client bandwidth constraints.
Change-Id: I16198f67ca4a8f7b2d3704044704b78bd267e2f3
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
