During Airplane mode testing with BT, UWB and PCIE concurrent
test scenarios, due to pcie traffic signal tolerance issue seen
on q2spi signals. As per the recommendation from design team
decreasing current drive strength from 6mA to 4mA for q2spi
active state GPIO configuration.
Change-Id: I530dfd636e834c4d6eb1e067e8dcb76dcfa4ab87
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
Remove unwanted config value for the gpio.
Change-Id: Id05eda44034b278cc7e3227a8154876026dedc2b
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
This change is to add default and shutdown
pinctrl states for Q2SPI SE.
Change-Id: Ie221501a9a850cc6cb1cf8be2fb84d17579c076d
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
For AON usecase switching from HLOS to SSC needs TLMM function to be
non IBI, hence during sleep mode change function of the TLMM to QUP
mode so that SSC can work with IBI disable without any issue.
Also ensures to restore back the TLMM Function to IBI mode when HLOS
i3c usecase starts.
Change-Id: Id6a5cdeafe2c3ee50186c0020831e4eb8f329f95
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
In pinctrl file there is extra space in function name for
qup1_se0_l1, which is leading to ios lines not in good state.
To solve the removed extra space.
Change-Id: I79b34f15bcf3eb52ac950876b3339c77d036983d
Signed-off-by: Anil Veshala Veshala <quic_aveshala@quicinc.com>
Change adds fts touch driver device nodes for Sun
CDP and MTP target. Also adds pinctrl states for
touchscreen.
Change-Id: Iabba28806e4f1f3cced6270f82cbdca1c1366ede
Signed-off-by: Rohith Iyer <quic_rohiiyer@quicinc.com>
To access gpios from apps and adsp, we have added apps and
remote flag in dtsi. To identify apps is busy or not, added
qcom-apps flag during active state and added qcom-remote flag
during suspend state, so other SS can use gpios during apps
in suspend state. with this flags in pinctrl file for respective
GPIOs will help eGPIO to work for AON camera usecase.
Change-Id: I621ae6be653fe89034245d80b650afd8893c7e41
Signed-off-by: Anil Veshala Veshala <quic_aveshala@quicinc.com>
Add M31 eUSB2 and QMP SS PHY nodes to sun. Add required dependencies in
pinctrl as well for HW based SS lane detection.
Change-Id: Ib1546aa7d92853a88a05d0bbc836ec4caac40960
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Add initial devicetree nodes and entries to support
PCIe RC0 port configuration on sun.
Change-Id: I3b7419bfd376a51388785cc4e2f9702ddaabe397
Signed-off-by: Lazarus Motha <quic_lmotha@quicinc.com>
Add bindings for WCD and WSA in pinctrl dt
file for sun.
Change-Id: Icb1fd6fb5950c5814cb4039d369647baac93ddf3
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
