Files
android_kernel_samsung_sm87…/qcom/pm8550vs.dtsi
Anjelique Melendez ea8a9577b5 ARM: dts: qcom: Prepare to add PMIC devices for Sun
Sun and pineapple share certain PMICs. Prepare the shared PMIC devices
to be used for both Sun and Pineapple.

Change-Id: I378e781751b4ee42b3c0d4940dff30ffbd2b3e5a
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
2023-09-27 16:55:09 -07:00

225 lines
4.6 KiB
Plaintext

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
pm8550vs_c: qcom,pm8550vs@2 {
compatible = "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_c_tz: pm8550vs-c-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_c_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_d: qcom,pm8550vs@3 {
compatible = "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_d_tz: pm8550vs-d-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_d_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_e: qcom,pm8550vs@4 {
compatible = "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_e_tz: pm8550vs-e-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_e_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_g: qcom,pm8550vs@6 {
compatible = "qcom,spmi-pmic";
reg = <0x6 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8550vs_g_tz: pm8550vs-g-temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_g_gpios: pinctrl@8800 {
compatible = "qcom,pm8550vs-gpio";
reg = <0x8800>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&thermal_zones {
pm8550vs_c_temp_alarm: pm8550vs_c_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_c_tz>;
status = "disabled";
trips {
pm8550vs_c_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_c_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_c_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550vs_d_temp_alarm: pm8550vs_d_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_d_tz>;
status = "disabled";
trips {
pm8550vs_d_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_d_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_d_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550vs_e_temp_alarm: pm8550vs_e_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_e_tz>;
status = "disabled";
trips {
pm8550vs_e_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_e_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_e_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8550vs_g_temp_alarm: pm8550vs_g_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8550vs_g_tz>;
status = "disabled";
trips {
pm8550vs_g_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_g_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
pm8550vs_g_trip2: trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
};