bfeba3fcee
Add idle states for CPUs and CPU clusters, added PSCI device, to enable CPUs to enter deeper LPMs. Disabled the idle states till Rumi validations are done. Additionally. updated APPS RSC device to be in cluster power domain to handle RSC activities when cluster is powering off. Change-Id: I0dc50ff04bb480eb9ebdfa0bbaebfdf954c7c41b Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
1612 lines
37 KiB
Plaintext
1612 lines
37 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/qcom,cambistmclkcc-sun.h>
|
|
#include <dt-bindings/clock/qcom,camcc-sun.h>
|
|
#include <dt-bindings/clock/qcom,dispcc-tuna.h>
|
|
#include <dt-bindings/clock/qcom,evacc-tuna.h>
|
|
#include <dt-bindings/clock/qcom,gcc-tuna.h>
|
|
#include <dt-bindings/clock/qcom,gpucc-tuna.h>
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
|
#include <dt-bindings/clock/qcom,tcsrcc-sun.h>
|
|
#include <dt-bindings/clock/qcom,videocc-tuna.h>
|
|
#include <dt-bindings/interconnect/qcom,tuna.h>
|
|
#include <dt-bindings/interconnect/qcom,icc.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/soc/qcom,ipcc.h>
|
|
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/spmi/spmi.h>
|
|
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. Tuna";
|
|
compatible = "qcom,tuna";
|
|
qcom,msm-id = <655 0x10000>;
|
|
interrupt-parent = <&intc>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0 0 0 0>;
|
|
};
|
|
|
|
chosen: chosen {
|
|
bootargs = "nokaslr kpti=0 log_buf_len=256K swiotlb=0 loop.max_part=7";
|
|
};
|
|
|
|
reserved_memory: reserved-memory {};
|
|
|
|
firmware: firmware {
|
|
qcom_scm: qcom_scm {
|
|
compatible = "qcom,scm";
|
|
qcom,dload-mode = <&tcsr 0x19000>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &qupv3_se7_2uart;
|
|
ufshc1 = &ufshc_mem; /* Embedded UFS Slot */
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL0 &GOLD_RAIL_OFF_CL0>;
|
|
power-domains = <&CPU_PD0>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_0>;
|
|
L2_0: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
|
|
L3_0: l3-cache {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
CPU1: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL0 &GOLD_RAIL_OFF_CL0>;
|
|
power-domains = <&CPU_PD1>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_1>;
|
|
L2_1: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
|
|
};
|
|
|
|
CPU2: cpu@200 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x200>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL1 &GOLD_RAIL_OFF_CL1>;
|
|
power-domains = <&CPU_PD2>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_2>;
|
|
L2_2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU3: cpu@300 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x300>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL1 &GOLD_RAIL_OFF_CL1>;
|
|
power-domains = <&CPU_PD3>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_3>;
|
|
L2_3: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU4: cpu@400 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x400>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL1 &GOLD_RAIL_OFF_CL1>;
|
|
power-domains = <&CPU_PD4>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_4>;
|
|
L2_4: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU5: cpu@500 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x500>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL2 &GOLD_RAIL_OFF_CL2>;
|
|
power-domains = <&CPU_PD5>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_5>;
|
|
L2_5: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU6: cpu@600 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x600>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL2 &GOLD_RAIL_OFF_CL2>;
|
|
power-domains = <&CPU_PD6>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_6>;
|
|
L2_6: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU7: cpu@700 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x700>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_PLUS_OFF &GOLD_PLUS_RAIL_OFF>;
|
|
power-domains = <&CPU_PD7>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_7>;
|
|
L2_7: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU1>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&CPU2>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU3>;
|
|
};
|
|
|
|
core2 {
|
|
cpu = <&CPU4>;
|
|
};
|
|
};
|
|
|
|
cluster2 {
|
|
core0 {
|
|
cpu = <&CPU5>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU6>;
|
|
};
|
|
};
|
|
|
|
cluster3 {
|
|
core0 {
|
|
cpu = <&CPU7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
idle-states {
|
|
entry-method = "psci";
|
|
|
|
GOLD_OFF_CL0: gold-cluster0-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <1100>;
|
|
min-residency-us = <4011>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_RAIL_OFF_CL0: gold-cluster0-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <550>;
|
|
exit-latency-us = <1050>;
|
|
min-residency-us = <7951>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_OFF_CL1: gold-cluster1-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <1100>;
|
|
min-residency-us = <4011>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_RAIL_OFF_CL1: gold-cluster1-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <550>;
|
|
exit-latency-us = <1050>;
|
|
min-residency-us = <7951>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_OFF_CL2: gold-cluster2-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <1100>;
|
|
min-residency-us = <4011>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_RAIL_OFF_CL2: gold-cluster2-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <550>;
|
|
exit-latency-us = <1050>;
|
|
min-residency-us = <7951>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_PLUS_OFF: gold-plus-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <450>;
|
|
exit-latency-us = <1200>;
|
|
min-residency-us = <6230>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_PLUS_RAIL_OFF: gold-plus-cluster3-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <500>;
|
|
exit-latency-us = <1350>;
|
|
min-residency-us = <7480>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
CLUSTER_PWR_DN: cluster-d4 { /* D4 */
|
|
compatible = "domain-idle-state";
|
|
idle-state-name = "l3-off";
|
|
entry-latency-us = <750>;
|
|
exit-latency-us = <2350>;
|
|
min-residency-us = <9144>;
|
|
arm,psci-suspend-param = <0x41000044>;
|
|
};
|
|
|
|
CX_RET: cx-ret { /* Cx Ret */
|
|
compatible = "domain-idle-state";
|
|
idle-state-name = "cx-ret";
|
|
entry-latency-us = <1561>;
|
|
exit-latency-us = <2801>;
|
|
min-residency-us = <8550>;
|
|
arm,psci-suspend-param = <0x41001344>;
|
|
};
|
|
|
|
APSS_OFF: cluster-e3 { /* E3 */
|
|
compatible = "domain-idle-state";
|
|
idle-state-name = "llcc-off";
|
|
entry-latency-us = <2800>;
|
|
exit-latency-us = <4400>;
|
|
min-residency-us = <10150>;
|
|
arm,psci-suspend-param = <0x4100b344>;
|
|
};
|
|
};
|
|
|
|
soc: soc { };
|
|
};
|
|
|
|
#include "tuna-reserved-memory.dtsi"
|
|
#include "msm-arm-smmu-tuna.dtsi"
|
|
#include "tuna-dma-heaps.dtsi"
|
|
|
|
&reserved_memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* global autoconfigured region for contiguous allocations */
|
|
system_cma: linux,cma {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0x2000000>;
|
|
linux,cma-default;
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0 0xffffffff>;
|
|
compatible = "simple-bus";
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
|
|
CPU_PD0: cpu-pd0 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD1: cpu-pd1 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD2: cpu-pd2 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD3: cpu-pd3 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD4: cpu-pd4 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD5: cpu-pd5 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD6: cpu-pd6 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD7: cpu-pd7 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CLUSTER_PD: cluster-pd {
|
|
#power-domain-cells = <0>;
|
|
domain-idle-states = <&CLUSTER_PWR_DN &CX_RET &APSS_OFF>;
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@17100000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
#redistributor-regions = <1>;
|
|
redistributor-stride = <0x0 0x40000>;
|
|
reg = <0x17100000 0x10000>, /* GICD */
|
|
<0x17180000 0x200000>; /* GICR * 8 */
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
arch_timer: timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
memtimer: timer@17420000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0x17420000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@17421000 {
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17421000 0x1000>,
|
|
<0x17422000 0x1000>;
|
|
};
|
|
|
|
frame@17423000 {
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17423000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17425000 {
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17425000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17427000 {
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17427000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17429000 {
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17429000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@1742b000 {
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1742b000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@1742d000 {
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1742d000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
apps_rsc: rsc@17a00000 {
|
|
label = "apps_rsc";
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0x17a00000 0x10000>,
|
|
<0x17a10000 0x10000>,
|
|
<0x17a20000 0x10000>;
|
|
reg-names = "drv-0", "drv-1", "drv-2";
|
|
qcom,drv-count = <3>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
|
|
apps_rsc_drv2: drv@2 {
|
|
qcom,drv-id = <2>;
|
|
qcom,tcs-offset = <0xd00>;
|
|
qcom,tcs-distance = <0x2a0>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 3>,
|
|
<SLEEP_TCS 2>,
|
|
<WAKE_TCS 2>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 1>;
|
|
};
|
|
|
|
apps_bcm_voter: bcm_voter {
|
|
compatible = "qcom,bcm-voter";
|
|
};
|
|
};
|
|
};
|
|
|
|
cluster-device {
|
|
compatible = "qcom,lpm-cluster-dev";
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
cam_rsc: rsc@adc8000 {
|
|
label = "cam_rsc";
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0xadc8000 0x1000>,
|
|
<0xadc9000 0x1000>,
|
|
<0xadca000 0x1000>;
|
|
reg-names = "drv-0", "drv-1", "drv-2";
|
|
qcom,drv-count = <3>;
|
|
qcom,hw-channel;
|
|
interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&camcc CAM_CC_DRV_AHB_CLK>;
|
|
|
|
cam_rsc_drv0: drv@0 {
|
|
qcom,drv-id = <0>;
|
|
qcom,tcs-offset = <0x520>;
|
|
qcom,tcs-distance = <0x150>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
|
|
channel@1 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
};
|
|
|
|
cam_rsc_drv1: drv@1 {
|
|
qcom,drv-id = <1>;
|
|
qcom,tcs-offset = <0x520>;
|
|
qcom,tcs-distance = <0x150>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
|
|
channel@1 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
};
|
|
|
|
cam_rsc_drv2: drv@2 {
|
|
qcom,drv-id = <2>;
|
|
qcom,tcs-offset = <0x520>;
|
|
qcom,tcs-distance = <0x150>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
|
|
channel@1 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
disp_rsc: rsc@af20000 {
|
|
label = "disp_rsc";
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0xaf20000 0x1000>;
|
|
reg-names = "drv-0";
|
|
qcom,drv-count = <1>;
|
|
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&dispcc DISP_CC_MDSS_RSCC_AHB_CLK>;
|
|
|
|
disp_rsc_drv0: drv@0 {
|
|
qcom,drv-id = <0>;
|
|
qcom,tcs-offset = <0x520>;
|
|
qcom,tcs-distance = <0x150>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<SLEEP_TCS 1>,
|
|
<WAKE_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pdc: interrupt-controller@b220000 {
|
|
compatible = "qcom,tuna-pdc", "qcom,pdc";
|
|
reg = <0xb220000 0x10000>, <0x17c000f0 0x60>;
|
|
qcom,pdc-ranges = <0 480 8>, <8 719 1>, <9 718 1>,
|
|
<10 230 1>, <11 724 1>, <12 716 1>,
|
|
<13 727 1>, <14 720 1>, <15 726 1>,
|
|
<16 721 1>, <17 262 1>, <18 70 1>,
|
|
<19 723 1>, <20 234 1>, <22 725 1>,
|
|
<23 231 1>, <24 504 14>, <40 520 6>,
|
|
<51 531 4>, <58 538 2>, <61 541 4>,
|
|
<67 547 27>, <94 609 31>, <125 63 1>,
|
|
<126 366 2>, <128 374 1>, <129 378 1>,
|
|
<130 428 1>, <131 434 2>, <133 437 1>,
|
|
<134 452 2>, <136 458 2>, <138 464 11>,
|
|
<149 671 1>, <150 688 1>, <151 714 2>,
|
|
<153 722 1>, <154 255 1>, <155 269 2>,
|
|
<157 276 1>, <158 287 1>, <159 306 4>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
tlmm: pinctrl@f000000 {
|
|
compatible = "qcom,tuna-tlmm";
|
|
reg = <0x0f000000 0x1000000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
wakeup-parent = <&pdc>;
|
|
};
|
|
|
|
tcsr_mutex_block: syscon@1f40000 {
|
|
compatible = "syscon";
|
|
reg = <0x1f40000 0x20000>;
|
|
};
|
|
|
|
tcsr_mutex: hwlock {
|
|
compatible = "qcom,tcsr-mutex";
|
|
syscon = <&tcsr_mutex_block 0 0x1000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
ipcc_mproc: qcom,ipcc@406000 {
|
|
compatible = "qcom,ipcc";
|
|
reg = <0x406000 0x1000>;
|
|
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#mbox-cells = <2>;
|
|
};
|
|
|
|
aoss_qmp: power-controller@c300000 {
|
|
compatible = "qcom,aoss-qmp";
|
|
reg = <0xc300000 0x400>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_AOP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_AOP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
#power-domain-cells = <1>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
qmp_aop: qcom,qmp-aop {
|
|
compatible = "qcom,qmp-mbox";
|
|
qcom,qmp = <&aoss_qmp>;
|
|
label = "aop";
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
qmp_tme: qcom,qmp-tme {
|
|
compatible = "qcom,qmp-mbox";
|
|
qcom,remote-pid = <14>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_TME
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
mbox-names = "tme_qmp";
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_TME
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
|
|
label = "tme";
|
|
qcom,early-boot;
|
|
priority = <0>;
|
|
mbox-desc-offset = <0x0>;
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
qcom,smp2p-adsp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <443>, <429>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <2>;
|
|
|
|
adsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
adsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
sleepstate_smp2p_out: sleepstate-out {
|
|
qcom,entry-name = "sleepstate";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
sleepstate_smp2p_in: qcom,sleepstate-in {
|
|
qcom,entry-name = "sleepstate_see";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_rdbg2_out: qcom,smp2p-rdbg2-out {
|
|
qcom,entry-name = "rdbg";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
smp2p_rdbg2_in: qcom,smp2p-rdbg2-in {
|
|
qcom,entry-name = "rdbg";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
|
|
qcom,smp2p-cdsp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <94>, <432>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <5>;
|
|
|
|
cdsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
cdsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_rdbg5_out: qcom,smp2p-rdbg5-out {
|
|
qcom,entry-name = "rdbg";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
smp2p_rdbg5_in: qcom,smp2p-rdbg5-in {
|
|
qcom,entry-name = "rdbg";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
qcom,smp2p-modem {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <435>, <428>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_ipa_1_out: qcom,smp2p-ipa-1-out {
|
|
qcom,entry-name = "ipa";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
/* ipa - inbound entry from mss */
|
|
smp2p_ipa_1_in: qcom,smp2p-ipa-1-in {
|
|
qcom,entry-name = "ipa";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_smem_mailbox_1_out: qcom,smp2p-smem-mailbox-1-out {
|
|
qcom,entry-name = "smem-mailbox";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
smp2p_smem_mailbox_1_in: qcom,smp2p-smem-mailbox-1-in {
|
|
qcom,entry-name = "smem-mailbox";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
qcom,smp2p-soccp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <617>, <616>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_SOCCP IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_SOCCP IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <19>;
|
|
|
|
soccp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
soccp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
qcom,smp2p_sleepstate {
|
|
compatible = "qcom,smp2p-sleepstate";
|
|
qcom,smem-states = <&sleepstate_smp2p_out 0>;
|
|
interrupt-parent = <&sleepstate_smp2p_in>;
|
|
interrupts = <0 0>;
|
|
interrupt-names = "smp2p-sleepstate-in";
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo_board {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <76800000>;
|
|
clock-output-names = "xo_board";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000>;
|
|
clock-output-names = "sleep_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
pcie_0_pipe_clk: pcie_0_pipe_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "pcie_0_pipe_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_rx_symbol_0_clk: ufs_phy_rx_symbol_0_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_rx_symbol_0_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_rx_symbol_1_clk: ufs_phy_rx_symbol_1_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_rx_symbol_1_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_tx_symbol_0_clk: ufs_phy_tx_symbol_0_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_tx_symbol_0_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
usb3_phy_wrapper_gcc_usb30_pipe_clk: usb3_phy_wrapper_gcc_usb30_pipe_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "usb3_phy_wrapper_gcc_usb30_pipe_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
rpmhcc: clock-controller {
|
|
compatible = "fixed-clock";
|
|
clock-output-names = "rpmh_clocks";
|
|
clock-frequency = <19200000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
cambistmclkcc: clock-controller@1760000 {
|
|
compatible = "qcom,tuna-cambistmclkcc", "syscon";
|
|
reg = <0x1760000 0x6000>;
|
|
reg-name = "cc_base";
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_CAMERA_AHB_CLK>;
|
|
clock-names = "bi_tcxo",
|
|
"sleep_clk",
|
|
"iface";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
|
|
cam_crm: syscon@adcd600 {
|
|
compatible = "syscon";
|
|
reg = <0xadcd600 0x2000>;
|
|
};
|
|
|
|
camcc: clock-controller@ade0000 {
|
|
compatible = "qcom,tuna-camcc", "syscon";
|
|
reg = <0xade0000 0x20000>;
|
|
reg-name = "cc_base";
|
|
vdd_mm-supply = <&VDD_MM_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
vdd_mxc-supply = <&VDD_MXC_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_CAMERA_AHB_CLK>;
|
|
clock-names = "bi_tcxo",
|
|
"sleep_clk",
|
|
"iface";
|
|
qcom,cam_crm-crmc = <&cam_crm>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
dispcc: clock-controller@af00000 {
|
|
compatible = "qcom,dummycc";
|
|
clock-output-names = "dispcc_clocks";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
evacc: clock-controller@abf0000 {
|
|
compatible = "qcom,tuna-evacc", "syscon";
|
|
reg = <0xabf0000 0x10000>;
|
|
reg-name = "cc_base";
|
|
vdd_mm-supply = <&VDD_MM_LEVEL>;
|
|
vdd_mxc-supply = <&VDD_MXC_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_EVA_AHB_CLK>;
|
|
clock-names = "bi_tcxo",
|
|
"bi_tcxo_ao",
|
|
"sleep_clk",
|
|
"iface";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gcc: clock-controller@100000 {
|
|
compatible = "qcom,tuna-gcc", "syscon";
|
|
reg = <0x100000 0x1f4200>;
|
|
reg-name = "cc_base";
|
|
vdd_cx-supply = <&VDD_CX_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&pcie_0_pipe_clk>,
|
|
<&sleep_clk>,
|
|
<&ufs_phy_rx_symbol_0_clk>,
|
|
<&ufs_phy_rx_symbol_1_clk>,
|
|
<&ufs_phy_tx_symbol_0_clk>,
|
|
<&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
|
|
clock-names = "bi_tcxo",
|
|
"pcie_0_pipe_clk",
|
|
"sleep_clk",
|
|
"ufs_phy_rx_symbol_0_clk",
|
|
"ufs_phy_rx_symbol_1_clk",
|
|
"ufs_phy_tx_symbol_0_clk",
|
|
"usb3_phy_wrapper_gcc_usb30_pipe_clk";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gpucc: clock-controller@3d90000 {
|
|
compatible = "qcom,tuna-gpucc", "syscon";
|
|
reg = <0x3d90000 0x9800>;
|
|
reg-name = "cc_base";
|
|
vdd_cx-supply = <&VDD_CX_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>,
|
|
<&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>;
|
|
clock-names = "bi_tcxo",
|
|
"gpll0_out_main",
|
|
"gpll0_out_main_div";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
tcsrcc: clock-controller@1fbf000 {
|
|
compatible = "qcom,tuna-tcsrcc", "syscon";
|
|
reg = <0x1fbf000 0x14>;
|
|
reg-name = "cc_base";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
videocc: clock-controller@aaf0000 {
|
|
compatible = "qcom,tuna-videocc", "syscon";
|
|
reg = <0xaaf0000 0x10000>;
|
|
reg-name = "cc_base";
|
|
vdd_mm-supply = <&VDD_MM_LEVEL>;
|
|
vdd_mxc-supply = <&VDD_MXC_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_VIDEO_AHB_CLK>;
|
|
clock-names = "bi_tcxo",
|
|
"bi_tcxo_ao",
|
|
"sleep_clk",
|
|
"iface";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
tcsr: syscon@1fc0000 {
|
|
compatible = "syscon";
|
|
reg = <0x1fc0000 0x30000>;
|
|
};
|
|
|
|
clk_virt: interconnect@0 {
|
|
compatible = "qcom,tuna-clk_virt";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
mc_virt: interconnect@1 {
|
|
compatible = "qcom,tuna-mc_virt";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
config_noc: interconnect@1600000 {
|
|
compatible = "qcom,tuna-cnoc_cfg";
|
|
reg = <0x1600000 0x9200>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
cnoc_main: interconnect@1500000 {
|
|
compatible = "qcom,tuna-cnoc_main";
|
|
reg = <0x1500000 0x16080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
system_noc: interconnect@1680000 {
|
|
compatible = "qcom,tuna-system_noc";
|
|
reg = <0x1680000 0x1d080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
pcie_noc: interconnect@16c0000 {
|
|
compatible = "qcom,tuna-pcie_anoc";
|
|
reg = <0x16c0000 0x11400>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
aggre1_noc: interconnect@16e0000 {
|
|
compatible = "qcom,tuna-aggre1_noc";
|
|
reg = <0x16e0000 0x16400>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
aggre2_noc: interconnect@1700000 {
|
|
compatible = "qcom,tuna-aggre2_noc";
|
|
reg = <0x1700000 0x1f400>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
mmss_noc: interconnect@1780000 {
|
|
compatible = "qcom,tuna-mmss_noc";
|
|
reg = <0x1780000 0x7d800>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
gem_noc: interconnect@24100000 {
|
|
compatible = "qcom,tuna-gem_noc";
|
|
reg = <0x24100000 0x14d080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
nsp_noc: interconnect@320c0000 {
|
|
compatible = "qcom,tuna-nsp_noc";
|
|
reg = <0x320c0000 0xe080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
lpass_ag_noc: interconnect@7e40000 {
|
|
compatible = "qcom,tuna-lpass_ag_noc";
|
|
reg = <0x7e40000 0xe080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
lpass_lpiaon_noc: interconnect@7400000 {
|
|
compatible = "qcom,tuna-lpass_lpiaon_noc";
|
|
reg = <0x7400000 0x19080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
lpass_lpicx_noc: interconnect@7420000 {
|
|
compatible = "qcom,tuna-lpass_lpicx_noc";
|
|
reg = <0x7420000 0x44080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
ufsphy_mem: ufsphy_mem@1d80000 {
|
|
reg = <0x1d80000 0x2000>;
|
|
reg-names = "phy_mem";
|
|
#phy-cells = <0>;
|
|
|
|
lanes-per-direction = <2>;
|
|
clock-names = "ref_clk_src",
|
|
"ref_aux_clk", "qref_clk",
|
|
"rx_sym0_mux_clk", "rx_sym1_mux_clk", "tx_sym0_mux_clk",
|
|
"rx_sym0_phy_clk", "rx_sym1_phy_clk", "tx_sym0_phy_clk";
|
|
clocks = <&rpmhcc RPMH_CXO_PAD_CLK>,
|
|
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
|
|
<&tcsrcc TCSR_UFS_CLKREF_EN>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC>,
|
|
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC>,
|
|
<&ufs_phy_rx_symbol_0_clk>,
|
|
<&ufs_phy_rx_symbol_1_clk>,
|
|
<&ufs_phy_tx_symbol_0_clk>;
|
|
resets = <&ufshc_mem 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ufshc_mem: ufshc@1d84000 {
|
|
compatible = "qcom,ufshc";
|
|
reg = <0x1d84000 0x3000>;
|
|
reg-names = "ufs_mem";
|
|
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&ufsphy_mem>;
|
|
phy-names = "ufsphy";
|
|
#reset-cells = <1>;
|
|
|
|
lanes-per-direction = <2>;
|
|
clock-names =
|
|
"core_clk",
|
|
"bus_aggr_clk",
|
|
"iface_clk",
|
|
"core_clk_unipro",
|
|
"core_clk_ice",
|
|
"ref_clk",
|
|
"tx_lane0_sync_clk",
|
|
"rx_lane0_sync_clk",
|
|
"rx_lane1_sync_clk";
|
|
clocks =
|
|
<&gcc GCC_UFS_PHY_AXI_CLK>,
|
|
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
|
|
<&gcc GCC_UFS_PHY_AHB_CLK>,
|
|
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
|
|
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
|
|
<&rpmhcc RPMH_LN_BB_CLK3>,
|
|
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
|
|
freq-table-hz =
|
|
<100000000 403000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<100000000 403000000>,
|
|
<100000000 403000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>;
|
|
|
|
interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
|
|
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
|
|
interconnect-names = "ufs-ddr", "cpu-ufs";
|
|
|
|
/* set the dependency that smmu being probed before ufs */
|
|
depends-on-supply = <&apps_smmu>;
|
|
|
|
iommus = <&apps_smmu 0x60 0x0>;
|
|
qcom,iommu-dma = "bypass";
|
|
dma-coherent;
|
|
|
|
qcom,bypass-pbl-rst-wa;
|
|
qcom,max-cpus = <8>;
|
|
|
|
reset-gpios = <&tlmm 187 GPIO_ACTIVE_LOW>;
|
|
resets = <&gcc GCC_UFS_PHY_BCR>;
|
|
reset-names = "rst";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spmi_bus: spmi0_bus: qcom,spmi@c42d000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0xc42d000 0x4000>,
|
|
<0xc400000 0x3000>,
|
|
<0xc500000 0x400000>,
|
|
<0xc440000 0x80000>,
|
|
<0xc4c0000 0x10000>;
|
|
reg-names = "cnfg", "core", "chnls", "obsrvr", "intr";
|
|
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "periph_irq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
qcom,channel = <0>;
|
|
qcom,ee = <0>;
|
|
qcom,bus-id = <0>;
|
|
};
|
|
|
|
spmi1_bus: qcom,spmi@c432000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0xc432000 0x4000>,
|
|
<0xc400000 0x3000>,
|
|
<0xc500000 0x400000>,
|
|
<0xc440000 0x80000>,
|
|
<0xc4d0000 0x10000>;
|
|
reg-names = "cnfg", "core", "chnls", "obsrvr", "intr";
|
|
interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "periph_irq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
qcom,channel = <0>;
|
|
qcom,ee = <0>;
|
|
qcom,bus-id = <1>;
|
|
depends-on-supply = <&spmi0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spmi0_debug_bus: qcom,spmi-debug@10b14000 {
|
|
compatible = "qcom,spmi-pmic-arb-debug";
|
|
reg = <0x10b14000 0x60>, <0x221c8784 0x4>;
|
|
reg-names = "core", "fuse";
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "core_clk";
|
|
qcom,fuse-enable-bit = <18>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
depends-on-supply = <&spmi_bus>;
|
|
|
|
pmk8550@0 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <0 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmxr2230@1 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <1 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pm8550vs@3 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <3 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmd802x@4 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <4 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pm8550ve@5 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <5 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pm8550vs@6 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <6 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmg1110@8 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <8 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmg1110@9 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <9 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmr735d@a {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <10 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
};
|
|
|
|
thermal_zones: thermal-zones {
|
|
};
|
|
|
|
qcom,pmic_glink {
|
|
compatible = "qcom,qti-pmic-glink";
|
|
qcom,pmic-glink-channel = "PMIC_RTR_ADSP_APPS";
|
|
qcom,subsys-name = "lpass";
|
|
qcom,protection-domain = "tms/servreg", "msm/adsp/charger_pd";
|
|
depends-on-supply = <&ipcc_mproc>;
|
|
|
|
battery_charger: qcom,battery_charger {
|
|
compatible = "qcom,battery-charger";
|
|
};
|
|
|
|
ucsi: qcom,ucsi {
|
|
compatible = "qcom,ucsi-glink";
|
|
};
|
|
|
|
altmode: qcom,altmode {
|
|
compatible = "qcom,altmode-glink";
|
|
#altmode-cells = <1>;
|
|
};
|
|
};
|
|
|
|
qcom,pmic_glink_log {
|
|
compatible = "qcom,qti-pmic-glink";
|
|
qcom,pmic-glink-channel = "PMIC_LOGS_ADSP_APPS";
|
|
|
|
qcom,battery_debug {
|
|
compatible = "qcom,battery-debug";
|
|
};
|
|
|
|
qcom,charger_ulog_glink {
|
|
compatible = "qcom,charger-ulog-glink";
|
|
};
|
|
|
|
pmic_glink_debug: qcom,pmic_glink_debug {
|
|
compatible = "qcom,pmic-glink-debug";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
depends-on-supply = <&spmi1_bus>;
|
|
|
|
};
|
|
|
|
pmic_glink_adc: qcom,glink-adc {
|
|
compatible = "qcom,glink-adc";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#io-channel-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "tuna-gdsc.dtsi"
|
|
|
|
&cam_cc_ipe_0_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_ofe_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_tfe_0_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_tfe_1_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_tfe_2_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_titan_top_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_MM_MXC_VOTER_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&disp_cc_mdss_core_gdsc {
|
|
compatible = "regulator-fixed";
|
|
status = "ok";
|
|
};
|
|
|
|
&disp_cc_mdss_core_int2_gdsc {
|
|
compatible = "regulator-fixed";
|
|
status = "ok";
|
|
};
|
|
|
|
&eva_cc_mvs0_gdsc {
|
|
clocks = <&gcc GCC_EVA_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
status = "ok";
|
|
};
|
|
|
|
&eva_cc_mvs0c_gdsc {
|
|
clocks = <&gcc GCC_EVA_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_MM_MXC_VOTER_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_pcie_0_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_pcie_0_phy_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_MX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_ufs_mem_phy_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_MX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_ufs_phy_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_usb30_prim_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_usb3_phy_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_MX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gpu_cc_cx_gdsc {
|
|
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>;
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gx_clkctl_gx_gdsc {
|
|
parent-supply = <&VDD_GFX_MXC_VOTER_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&video_cc_mvs0_gdsc {
|
|
clocks = <&gcc GCC_VIDEO_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
status = "ok";
|
|
};
|
|
|
|
&video_cc_mvs0c_gdsc {
|
|
clocks = <&gcc GCC_VIDEO_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_MM_MXC_VOTER_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&reserved_memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
aop_cmd_db_mem: aop_cmd_db_region@81c60000 {
|
|
compatible = "qcom,cmd-db";
|
|
no-map;
|
|
reg = <0x0 0x81c60000 0x0 0x20000>;
|
|
};
|
|
};
|
|
|
|
#include "tuna-pinctrl.dtsi"
|
|
#include "tuna-stub-regulators.dtsi"
|
|
#include "tuna-usb.dtsi"
|
|
#include "tuna-qupv3.dtsi"
|
|
#include "msm-rdbg.dtsi"
|
|
|
|
&qupv3_se7_2uart {
|
|
status = "ok";
|
|
};
|