Files
android_kernel_samsung_sm87…/bindings/mtd/cadence-nand-controller.txt
Melody Olvera 6f18ce8026 dt-bindings: Add devicetree bindings
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").

Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
2023-04-03 15:40:37 -07:00

54 lines
1.7 KiB
Plaintext

* Cadence NAND controller
Required properties:
- compatible : "cdns,hp-nfc"
- reg : Contains two entries, each of which is a tuple consisting of a
physical address and length. The first entry is the address and
length of the controller register set. The second entry is the
address and length of the Slave DMA data port.
- reg-names: should contain "reg" and "sdma"
- #address-cells: should be 1. The cell encodes the chip select connection.
- #size-cells : should be 0.
- interrupts : The interrupt number.
- clocks: phandle of the controller core clock (nf_clk).
Optional properties:
- dmas: shall reference DMA channel associated to the NAND controller
- cdns,board-delay-ps : Estimated Board delay. The value includes the total
round trip delay for the signals and is used for deciding on values
associated with data read capture. The example formula for SDR mode is
the following:
board delay = RE#PAD delay + PCB trace to device + PCB trace from device
+ DQ PAD delay
Child nodes represent the available NAND chips.
Required properties of NAND chips:
- reg: shall contain the native Chip Select ids from 0 to max supported by
the cadence nand flash controller
See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
generic bindings.
Example:
nand_controller: nand-controller@60000000 {
compatible = "cdns,hp-nfc";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x60000000 0x10000>, <0x80000000 0x10000>;
reg-names = "reg", "sdma";
clocks = <&nf_clk>;
cdns,board-delay-ps = <4830>;
interrupts = <2 0>;
nand@0 {
reg = <0>;
label = "nand-1";
};
nand@1 {
reg = <1>;
label = "nand-2";
};
};