7704cdcbcb
Add cpufreq cycle counter register information to devicetree in a separate node for use by associated driver. Change-Id: I5c57507acf6d4488402424619ac9d2ad356fb308 Signed-off-by: Ankit Sharma <quic_anshar@quicinc.com>
1665 lines
38 KiB
Plaintext
1665 lines
38 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/qcom,cambistmclkcc-sun.h>
|
|
#include <dt-bindings/clock/qcom,camcc-sun.h>
|
|
#include <dt-bindings/clock/qcom,dispcc-tuna.h>
|
|
#include <dt-bindings/clock/qcom,evacc-tuna.h>
|
|
#include <dt-bindings/clock/qcom,gcc-tuna.h>
|
|
#include <dt-bindings/clock/qcom,gpucc-tuna.h>
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
|
#include <dt-bindings/clock/qcom,tcsrcc-sun.h>
|
|
#include <dt-bindings/clock/qcom,videocc-tuna.h>
|
|
#include <dt-bindings/interconnect/qcom,tuna.h>
|
|
#include <dt-bindings/interconnect/qcom,icc.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/soc/qcom,ipcc.h>
|
|
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/spmi/spmi.h>
|
|
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. Tuna";
|
|
compatible = "qcom,tuna";
|
|
qcom,msm-id = <655 0x10000>;
|
|
interrupt-parent = <&intc>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0 0 0 0>;
|
|
};
|
|
|
|
chosen: chosen {
|
|
bootargs = "nokaslr kpti=0 log_buf_len=256K swiotlb=0 loop.max_part=7";
|
|
};
|
|
|
|
reserved_memory: reserved-memory {};
|
|
|
|
firmware: firmware {
|
|
qcom_scm: qcom_scm {
|
|
compatible = "qcom,scm";
|
|
qcom,dload-mode = <&tcsr 0x19000>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &qupv3_se7_2uart;
|
|
ufshc1 = &ufshc_mem; /* Embedded UFS Slot */
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL0 &GOLD_RAIL_OFF_CL0>;
|
|
power-domains = <&CPU_PD0>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_0>;
|
|
L2_0: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
|
|
L3_0: l3-cache {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
CPU1: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL0 &GOLD_RAIL_OFF_CL0>;
|
|
power-domains = <&CPU_PD1>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_1>;
|
|
L2_1: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
|
|
};
|
|
|
|
CPU2: cpu@200 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x200>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL1 &GOLD_RAIL_OFF_CL1>;
|
|
power-domains = <&CPU_PD2>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_2>;
|
|
L2_2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU3: cpu@300 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x300>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL1 &GOLD_RAIL_OFF_CL1>;
|
|
power-domains = <&CPU_PD3>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_3>;
|
|
L2_3: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU4: cpu@400 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x400>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL1 &GOLD_RAIL_OFF_CL1>;
|
|
power-domains = <&CPU_PD4>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_4>;
|
|
L2_4: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU5: cpu@500 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x500>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL2 &GOLD_RAIL_OFF_CL2>;
|
|
power-domains = <&CPU_PD5>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_5>;
|
|
L2_5: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU6: cpu@600 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x600>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_OFF_CL2 &GOLD_RAIL_OFF_CL2>;
|
|
power-domains = <&CPU_PD6>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_6>;
|
|
L2_6: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
CPU7: cpu@700 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x700>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&GOLD_PLUS_OFF &GOLD_PLUS_RAIL_OFF>;
|
|
power-domains = <&CPU_PD7>;
|
|
power-domain-names = "psci";
|
|
cpu-release-addr = <0x0 0xE3940000>;
|
|
next-level-cache = <&L2_7>;
|
|
L2_7: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
next-level-cache = <&L3_0>;
|
|
};
|
|
};
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU1>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&CPU2>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU3>;
|
|
};
|
|
|
|
core2 {
|
|
cpu = <&CPU4>;
|
|
};
|
|
};
|
|
|
|
cluster2 {
|
|
core0 {
|
|
cpu = <&CPU5>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU6>;
|
|
};
|
|
};
|
|
|
|
cluster3 {
|
|
core0 {
|
|
cpu = <&CPU7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
idle-states {
|
|
entry-method = "psci";
|
|
|
|
GOLD_OFF_CL0: gold-cluster0-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <1100>;
|
|
min-residency-us = <4011>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_RAIL_OFF_CL0: gold-cluster0-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <550>;
|
|
exit-latency-us = <1050>;
|
|
min-residency-us = <7951>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_OFF_CL1: gold-cluster1-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <1100>;
|
|
min-residency-us = <4011>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_RAIL_OFF_CL1: gold-cluster1-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <550>;
|
|
exit-latency-us = <1050>;
|
|
min-residency-us = <7951>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_OFF_CL2: gold-cluster2-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <1100>;
|
|
min-residency-us = <4011>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_RAIL_OFF_CL2: gold-cluster2-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <550>;
|
|
exit-latency-us = <1050>;
|
|
min-residency-us = <7951>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_PLUS_OFF: gold-plus-c3 { /* C3 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "pc";
|
|
entry-latency-us = <450>;
|
|
exit-latency-us = <1200>;
|
|
min-residency-us = <6230>;
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
GOLD_PLUS_RAIL_OFF: gold-plus-cluster3-c4 { /* C4 */
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "rail-pc";
|
|
entry-latency-us = <500>;
|
|
exit-latency-us = <1350>;
|
|
min-residency-us = <7480>;
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
CLUSTER_PWR_DN: cluster-d4 { /* D4 */
|
|
compatible = "domain-idle-state";
|
|
idle-state-name = "l3-off";
|
|
entry-latency-us = <750>;
|
|
exit-latency-us = <2350>;
|
|
min-residency-us = <9144>;
|
|
arm,psci-suspend-param = <0x41000044>;
|
|
};
|
|
|
|
CX_RET: cx-ret { /* Cx Ret */
|
|
compatible = "domain-idle-state";
|
|
idle-state-name = "cx-ret";
|
|
entry-latency-us = <1561>;
|
|
exit-latency-us = <2801>;
|
|
min-residency-us = <8550>;
|
|
arm,psci-suspend-param = <0x41001344>;
|
|
};
|
|
|
|
APSS_OFF: cluster-e3 { /* E3 */
|
|
compatible = "domain-idle-state";
|
|
idle-state-name = "llcc-off";
|
|
entry-latency-us = <2800>;
|
|
exit-latency-us = <4400>;
|
|
min-residency-us = <10150>;
|
|
arm,psci-suspend-param = <0x4100b344>;
|
|
};
|
|
};
|
|
|
|
soc: soc { };
|
|
};
|
|
|
|
#include "tuna-reserved-memory.dtsi"
|
|
#include "msm-arm-smmu-tuna.dtsi"
|
|
#include "tuna-dma-heaps.dtsi"
|
|
|
|
&reserved_memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* global autoconfigured region for contiguous allocations */
|
|
system_cma: linux,cma {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0x2000000>;
|
|
linux,cma-default;
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0 0xffffffff>;
|
|
compatible = "simple-bus";
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
|
|
CPU_PD0: cpu-pd0 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD1: cpu-pd1 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD2: cpu-pd2 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD3: cpu-pd3 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD4: cpu-pd4 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD5: cpu-pd5 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD6: cpu-pd6 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CPU_PD7: cpu-pd7 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
CLUSTER_PD: cluster-pd {
|
|
#power-domain-cells = <0>;
|
|
domain-idle-states = <&CLUSTER_PWR_DN &CX_RET &APSS_OFF>;
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@17100000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
#redistributor-regions = <1>;
|
|
redistributor-stride = <0x0 0x40000>;
|
|
reg = <0x17100000 0x10000>, /* GICD */
|
|
<0x17180000 0x200000>; /* GICR * 8 */
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
arch_timer: timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
memtimer: timer@17420000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0x17420000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@17421000 {
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17421000 0x1000>,
|
|
<0x17422000 0x1000>;
|
|
};
|
|
|
|
frame@17423000 {
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17423000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17425000 {
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17425000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17427000 {
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17427000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17429000 {
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17429000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@1742b000 {
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1742b000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@1742d000 {
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1742d000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
apps_rsc: rsc@17a00000 {
|
|
label = "apps_rsc";
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0x17a00000 0x10000>,
|
|
<0x17a10000 0x10000>,
|
|
<0x17a20000 0x10000>;
|
|
reg-names = "drv-0", "drv-1", "drv-2";
|
|
qcom,drv-count = <3>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&CLUSTER_PD>;
|
|
|
|
apps_rsc_drv2: drv@2 {
|
|
qcom,drv-id = <2>;
|
|
qcom,tcs-offset = <0xd00>;
|
|
qcom,tcs-distance = <0x2a0>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 3>,
|
|
<SLEEP_TCS 2>,
|
|
<WAKE_TCS 2>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 1>;
|
|
};
|
|
|
|
apps_bcm_voter: bcm_voter {
|
|
compatible = "qcom,bcm-voter";
|
|
};
|
|
};
|
|
};
|
|
|
|
cluster-device {
|
|
compatible = "qcom,lpm-cluster-dev";
|
|
power-domains = <&CLUSTER_PD>;
|
|
};
|
|
|
|
qcom,secure-buffer {
|
|
compatible = "qcom,secure-buffer";
|
|
qcom,vmid-cp-camera-preview-ro;
|
|
};
|
|
|
|
cam_rsc: rsc@adc8000 {
|
|
label = "cam_rsc";
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0xadc8000 0x1000>,
|
|
<0xadc9000 0x1000>,
|
|
<0xadca000 0x1000>;
|
|
reg-names = "drv-0", "drv-1", "drv-2";
|
|
qcom,drv-count = <3>;
|
|
qcom,hw-channel;
|
|
interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&camcc CAM_CC_DRV_AHB_CLK>;
|
|
|
|
cam_rsc_drv0: drv@0 {
|
|
qcom,drv-id = <0>;
|
|
qcom,tcs-offset = <0x520>;
|
|
qcom,tcs-distance = <0x150>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
|
|
channel@1 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
};
|
|
|
|
cam_rsc_drv1: drv@1 {
|
|
qcom,drv-id = <1>;
|
|
qcom,tcs-offset = <0x520>;
|
|
qcom,tcs-distance = <0x150>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
|
|
channel@1 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
};
|
|
|
|
cam_rsc_drv2: drv@2 {
|
|
qcom,drv-id = <2>;
|
|
qcom,tcs-offset = <0x520>;
|
|
qcom,tcs-distance = <0x150>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
|
|
channel@1 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<WAKE_TCS 1>,
|
|
<SLEEP_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
disp_rsc: rsc@af20000 {
|
|
label = "disp_rsc";
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0xaf20000 0x1000>;
|
|
reg-names = "drv-0";
|
|
qcom,drv-count = <1>;
|
|
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&dispcc DISP_CC_MDSS_RSCC_AHB_CLK>;
|
|
|
|
disp_rsc_drv0: drv@0 {
|
|
qcom,drv-id = <0>;
|
|
qcom,tcs-offset = <0x520>;
|
|
qcom,tcs-distance = <0x150>;
|
|
channel@0 {
|
|
qcom,tcs-config = <ACTIVE_TCS 0>,
|
|
<SLEEP_TCS 1>,
|
|
<WAKE_TCS 1>,
|
|
<CONTROL_TCS 0>,
|
|
<FAST_PATH_TCS 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pdc: interrupt-controller@b220000 {
|
|
compatible = "qcom,tuna-pdc", "qcom,pdc";
|
|
reg = <0xb220000 0x10000>, <0x17c000f0 0x60>;
|
|
qcom,pdc-ranges = <0 480 8>, <8 719 1>, <9 718 1>,
|
|
<10 230 1>, <11 724 1>, <12 716 1>,
|
|
<13 727 1>, <14 720 1>, <15 726 1>,
|
|
<16 721 1>, <17 262 1>, <18 70 1>,
|
|
<19 723 1>, <20 234 1>, <22 725 1>,
|
|
<23 231 1>, <24 504 14>, <40 520 6>,
|
|
<51 531 4>, <58 538 2>, <61 541 4>,
|
|
<67 547 27>, <94 609 31>, <125 63 1>,
|
|
<126 366 2>, <128 374 1>, <129 378 1>,
|
|
<130 428 1>, <131 434 2>, <133 437 1>,
|
|
<134 452 2>, <136 458 2>, <138 464 11>,
|
|
<149 671 1>, <150 688 1>, <151 714 2>,
|
|
<153 722 1>, <154 255 1>, <155 269 2>,
|
|
<157 276 1>, <158 287 1>, <159 306 4>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
tlmm: pinctrl@f000000 {
|
|
compatible = "qcom,tuna-tlmm";
|
|
reg = <0x0f000000 0x1000000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
wakeup-parent = <&pdc>;
|
|
};
|
|
|
|
tcsr_mutex_block: syscon@1f40000 {
|
|
compatible = "syscon";
|
|
reg = <0x1f40000 0x20000>;
|
|
};
|
|
|
|
tcsr_mutex: hwlock {
|
|
compatible = "qcom,tcsr-mutex";
|
|
syscon = <&tcsr_mutex_block 0 0x1000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
ipcc_mproc: qcom,ipcc@406000 {
|
|
compatible = "qcom,ipcc";
|
|
reg = <0x406000 0x1000>;
|
|
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#mbox-cells = <2>;
|
|
};
|
|
|
|
aoss_qmp: power-controller@c300000 {
|
|
compatible = "qcom,aoss-qmp";
|
|
reg = <0xc300000 0x400>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_AOP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_AOP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
#power-domain-cells = <1>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
qmp_aop: qcom,qmp-aop {
|
|
compatible = "qcom,qmp-mbox";
|
|
qcom,qmp = <&aoss_qmp>;
|
|
label = "aop";
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
qmp_tme: qcom,qmp-tme {
|
|
compatible = "qcom,qmp-mbox";
|
|
qcom,remote-pid = <14>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_TME
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
mbox-names = "tme_qmp";
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_TME
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
|
|
label = "tme";
|
|
qcom,early-boot;
|
|
priority = <0>;
|
|
mbox-desc-offset = <0x0>;
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
qcom,smp2p-adsp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <443>, <429>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <2>;
|
|
|
|
adsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
adsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
sleepstate_smp2p_out: sleepstate-out {
|
|
qcom,entry-name = "sleepstate";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
sleepstate_smp2p_in: qcom,sleepstate-in {
|
|
qcom,entry-name = "sleepstate_see";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_rdbg2_out: qcom,smp2p-rdbg2-out {
|
|
qcom,entry-name = "rdbg";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
smp2p_rdbg2_in: qcom,smp2p-rdbg2-in {
|
|
qcom,entry-name = "rdbg";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
|
|
qcom,smp2p-cdsp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <94>, <432>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <5>;
|
|
|
|
cdsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
cdsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_rdbg5_out: qcom,smp2p-rdbg5-out {
|
|
qcom,entry-name = "rdbg";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
smp2p_rdbg5_in: qcom,smp2p-rdbg5-in {
|
|
qcom,entry-name = "rdbg";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
qcom,smp2p-modem {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <435>, <428>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_ipa_1_out: qcom,smp2p-ipa-1-out {
|
|
qcom,entry-name = "ipa";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
/* ipa - inbound entry from mss */
|
|
smp2p_ipa_1_in: qcom,smp2p-ipa-1-in {
|
|
qcom,entry-name = "ipa";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_smem_mailbox_1_out: qcom,smp2p-smem-mailbox-1-out {
|
|
qcom,entry-name = "smem-mailbox";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
smp2p_smem_mailbox_1_in: qcom,smp2p-smem-mailbox-1-in {
|
|
qcom,entry-name = "smem-mailbox";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
qcom,smp2p-soccp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <617>, <616>;
|
|
interrupt-parent = <&ipcc_mproc>;
|
|
interrupts = <IPCC_CLIENT_SOCCP IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc_mproc IPCC_CLIENT_SOCCP IPCC_MPROC_SIGNAL_SMP2P>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <19>;
|
|
|
|
soccp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
soccp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
qcom,smp2p_sleepstate {
|
|
compatible = "qcom,smp2p-sleepstate";
|
|
qcom,smem-states = <&sleepstate_smp2p_out 0>;
|
|
interrupt-parent = <&sleepstate_smp2p_in>;
|
|
interrupts = <0 0>;
|
|
interrupt-names = "smp2p-sleepstate-in";
|
|
};
|
|
|
|
qcom,msm-adsprpc-mem {
|
|
compatible = "qcom,msm-adsprpc-mem-region";
|
|
memory-region = <&adsp_mem_heap>;
|
|
restrict-access;
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo_board {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <76800000>;
|
|
clock-output-names = "xo_board";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000>;
|
|
clock-output-names = "sleep_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
pcie_0_pipe_clk: pcie_0_pipe_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "pcie_0_pipe_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_rx_symbol_0_clk: ufs_phy_rx_symbol_0_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_rx_symbol_0_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_rx_symbol_1_clk: ufs_phy_rx_symbol_1_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_rx_symbol_1_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
ufs_phy_tx_symbol_0_clk: ufs_phy_tx_symbol_0_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "ufs_phy_tx_symbol_0_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
usb3_phy_wrapper_gcc_usb30_pipe_clk: usb3_phy_wrapper_gcc_usb30_pipe_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000>;
|
|
clock-output-names = "usb3_phy_wrapper_gcc_usb30_pipe_clk";
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
rpmhcc: clock-controller {
|
|
compatible = "fixed-clock";
|
|
clock-output-names = "rpmh_clocks";
|
|
clock-frequency = <19200000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
cambistmclkcc: clock-controller@1760000 {
|
|
compatible = "qcom,tuna-cambistmclkcc", "syscon";
|
|
reg = <0x1760000 0x6000>;
|
|
reg-name = "cc_base";
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_CAMERA_AHB_CLK>;
|
|
clock-names = "bi_tcxo",
|
|
"sleep_clk",
|
|
"iface";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
|
|
cam_crm: syscon@adcd600 {
|
|
compatible = "syscon";
|
|
reg = <0xadcd600 0x2000>;
|
|
};
|
|
|
|
camcc: clock-controller@ade0000 {
|
|
compatible = "qcom,tuna-camcc", "syscon";
|
|
reg = <0xade0000 0x20000>;
|
|
reg-name = "cc_base";
|
|
vdd_mm-supply = <&VDD_MM_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
vdd_mxc-supply = <&VDD_MXC_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_CAMERA_AHB_CLK>;
|
|
clock-names = "bi_tcxo",
|
|
"sleep_clk",
|
|
"iface";
|
|
qcom,cam_crm-crmc = <&cam_crm>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
dispcc: clock-controller@af00000 {
|
|
compatible = "qcom,dummycc";
|
|
clock-output-names = "dispcc_clocks";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
evacc: clock-controller@abf0000 {
|
|
compatible = "qcom,tuna-evacc", "syscon";
|
|
reg = <0xabf0000 0x10000>;
|
|
reg-name = "cc_base";
|
|
vdd_mm-supply = <&VDD_MM_LEVEL>;
|
|
vdd_mxc-supply = <&VDD_MXC_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_EVA_AHB_CLK>;
|
|
clock-names = "bi_tcxo",
|
|
"bi_tcxo_ao",
|
|
"sleep_clk",
|
|
"iface";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gcc: clock-controller@100000 {
|
|
compatible = "qcom,tuna-gcc", "syscon";
|
|
reg = <0x100000 0x1f4200>;
|
|
reg-name = "cc_base";
|
|
vdd_cx-supply = <&VDD_CX_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&pcie_0_pipe_clk>,
|
|
<&sleep_clk>,
|
|
<&ufs_phy_rx_symbol_0_clk>,
|
|
<&ufs_phy_rx_symbol_1_clk>,
|
|
<&ufs_phy_tx_symbol_0_clk>,
|
|
<&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
|
|
clock-names = "bi_tcxo",
|
|
"pcie_0_pipe_clk",
|
|
"sleep_clk",
|
|
"ufs_phy_rx_symbol_0_clk",
|
|
"ufs_phy_rx_symbol_1_clk",
|
|
"ufs_phy_tx_symbol_0_clk",
|
|
"usb3_phy_wrapper_gcc_usb30_pipe_clk";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gpucc: clock-controller@3d90000 {
|
|
compatible = "qcom,tuna-gpucc", "syscon";
|
|
reg = <0x3d90000 0x9800>;
|
|
reg-name = "cc_base";
|
|
vdd_cx-supply = <&VDD_CX_LEVEL>;
|
|
vdd_mx-supply = <&VDD_MX_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>,
|
|
<&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>;
|
|
clock-names = "bi_tcxo",
|
|
"gpll0_out_main",
|
|
"gpll0_out_main_div";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
tcsrcc: clock-controller@1fbf000 {
|
|
compatible = "qcom,tuna-tcsrcc", "syscon";
|
|
reg = <0x1fbf000 0x14>;
|
|
reg-name = "cc_base";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
videocc: clock-controller@aaf0000 {
|
|
compatible = "qcom,tuna-videocc", "syscon";
|
|
reg = <0xaaf0000 0x10000>;
|
|
reg-name = "cc_base";
|
|
vdd_mm-supply = <&VDD_MM_LEVEL>;
|
|
vdd_mxc-supply = <&VDD_MXC_LEVEL>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
<&sleep_clk>,
|
|
<&gcc GCC_VIDEO_AHB_CLK>;
|
|
clock-names = "bi_tcxo",
|
|
"bi_tcxo_ao",
|
|
"sleep_clk",
|
|
"iface";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
tcsr: syscon@1fc0000 {
|
|
compatible = "syscon";
|
|
reg = <0x1fc0000 0x30000>;
|
|
};
|
|
|
|
clk_virt: interconnect@0 {
|
|
compatible = "qcom,tuna-clk_virt";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
mc_virt: interconnect@1 {
|
|
compatible = "qcom,tuna-mc_virt";
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
config_noc: interconnect@1600000 {
|
|
compatible = "qcom,tuna-cnoc_cfg";
|
|
reg = <0x1600000 0x9200>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
cnoc_main: interconnect@1500000 {
|
|
compatible = "qcom,tuna-cnoc_main";
|
|
reg = <0x1500000 0x16080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
system_noc: interconnect@1680000 {
|
|
compatible = "qcom,tuna-system_noc";
|
|
reg = <0x1680000 0x1d080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
pcie_noc: interconnect@16c0000 {
|
|
compatible = "qcom,tuna-pcie_anoc";
|
|
reg = <0x16c0000 0x11400>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
aggre1_noc: interconnect@16e0000 {
|
|
compatible = "qcom,tuna-aggre1_noc";
|
|
reg = <0x16e0000 0x16400>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
aggre2_noc: interconnect@1700000 {
|
|
compatible = "qcom,tuna-aggre2_noc";
|
|
reg = <0x1700000 0x1f400>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
mmss_noc: interconnect@1780000 {
|
|
compatible = "qcom,tuna-mmss_noc";
|
|
reg = <0x1780000 0x7d800>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
gem_noc: interconnect@24100000 {
|
|
compatible = "qcom,tuna-gem_noc";
|
|
reg = <0x24100000 0x14d080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
nsp_noc: interconnect@320c0000 {
|
|
compatible = "qcom,tuna-nsp_noc";
|
|
reg = <0x320c0000 0xe080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
lpass_ag_noc: interconnect@7e40000 {
|
|
compatible = "qcom,tuna-lpass_ag_noc";
|
|
reg = <0x7e40000 0xe080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
lpass_lpiaon_noc: interconnect@7400000 {
|
|
compatible = "qcom,tuna-lpass_lpiaon_noc";
|
|
reg = <0x7400000 0x19080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
lpass_lpicx_noc: interconnect@7420000 {
|
|
compatible = "qcom,tuna-lpass_lpicx_noc";
|
|
reg = <0x7420000 0x44080>;
|
|
#interconnect-cells = <1>;
|
|
qcom,bcm-voter-names = "hlos";
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
qcom,skip-qos;
|
|
};
|
|
|
|
qcom,rmtfs_sharedmem@0 {
|
|
compatible = "qcom,sharedmem-uio";
|
|
reg = <0x0 0x400000>;
|
|
reg-names = "rmtfs";
|
|
qcom,client-id = <0x00000001>;
|
|
};
|
|
|
|
ufsphy_mem: ufsphy_mem@1d80000 {
|
|
reg = <0x1d80000 0x2000>;
|
|
reg-names = "phy_mem";
|
|
#phy-cells = <0>;
|
|
|
|
lanes-per-direction = <2>;
|
|
clock-names = "ref_clk_src",
|
|
"ref_aux_clk", "qref_clk",
|
|
"rx_sym0_mux_clk", "rx_sym1_mux_clk", "tx_sym0_mux_clk",
|
|
"rx_sym0_phy_clk", "rx_sym1_phy_clk", "tx_sym0_phy_clk";
|
|
clocks = <&rpmhcc RPMH_CXO_PAD_CLK>,
|
|
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
|
|
<&tcsrcc TCSR_UFS_CLKREF_EN>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC>,
|
|
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC>,
|
|
<&ufs_phy_rx_symbol_0_clk>,
|
|
<&ufs_phy_rx_symbol_1_clk>,
|
|
<&ufs_phy_tx_symbol_0_clk>;
|
|
resets = <&ufshc_mem 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ufshc_mem: ufshc@1d84000 {
|
|
compatible = "qcom,ufshc";
|
|
reg = <0x1d84000 0x3000>;
|
|
reg-names = "ufs_mem";
|
|
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&ufsphy_mem>;
|
|
phy-names = "ufsphy";
|
|
#reset-cells = <1>;
|
|
|
|
lanes-per-direction = <2>;
|
|
clock-names =
|
|
"core_clk",
|
|
"bus_aggr_clk",
|
|
"iface_clk",
|
|
"core_clk_unipro",
|
|
"core_clk_ice",
|
|
"ref_clk",
|
|
"tx_lane0_sync_clk",
|
|
"rx_lane0_sync_clk",
|
|
"rx_lane1_sync_clk";
|
|
clocks =
|
|
<&gcc GCC_UFS_PHY_AXI_CLK>,
|
|
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
|
|
<&gcc GCC_UFS_PHY_AHB_CLK>,
|
|
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
|
|
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
|
|
<&rpmhcc RPMH_LN_BB_CLK3>,
|
|
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
|
|
freq-table-hz =
|
|
<100000000 403000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<100000000 403000000>,
|
|
<100000000 403000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>;
|
|
|
|
interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
|
|
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
|
|
interconnect-names = "ufs-ddr", "cpu-ufs";
|
|
|
|
/* set the dependency that smmu being probed before ufs */
|
|
depends-on-supply = <&apps_smmu>;
|
|
|
|
iommus = <&apps_smmu 0x60 0x0>;
|
|
qcom,iommu-dma = "bypass";
|
|
dma-coherent;
|
|
|
|
qcom,bypass-pbl-rst-wa;
|
|
qcom,max-cpus = <8>;
|
|
|
|
reset-gpios = <&tlmm 187 GPIO_ACTIVE_LOW>;
|
|
resets = <&gcc GCC_UFS_PHY_BCR>;
|
|
reset-names = "rst";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spmi_bus: spmi0_bus: qcom,spmi@c42d000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0xc42d000 0x4000>,
|
|
<0xc400000 0x3000>,
|
|
<0xc500000 0x400000>,
|
|
<0xc440000 0x80000>,
|
|
<0xc4c0000 0x10000>;
|
|
reg-names = "cnfg", "core", "chnls", "obsrvr", "intr";
|
|
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "periph_irq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
qcom,channel = <0>;
|
|
qcom,ee = <0>;
|
|
qcom,bus-id = <0>;
|
|
};
|
|
|
|
spmi1_bus: qcom,spmi@c432000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0xc432000 0x4000>,
|
|
<0xc400000 0x3000>,
|
|
<0xc500000 0x400000>,
|
|
<0xc440000 0x80000>,
|
|
<0xc4d0000 0x10000>;
|
|
reg-names = "cnfg", "core", "chnls", "obsrvr", "intr";
|
|
interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "periph_irq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
qcom,channel = <0>;
|
|
qcom,ee = <0>;
|
|
qcom,bus-id = <1>;
|
|
depends-on-supply = <&spmi0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spmi0_debug_bus: qcom,spmi-debug@10b14000 {
|
|
compatible = "qcom,spmi-pmic-arb-debug";
|
|
reg = <0x10b14000 0x60>, <0x221c8784 0x4>;
|
|
reg-names = "core", "fuse";
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "core_clk";
|
|
qcom,fuse-enable-bit = <18>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
depends-on-supply = <&spmi_bus>;
|
|
|
|
pmk8550@0 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <0 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmxr2230@1 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <1 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pm8550vs@3 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <3 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmd802x@4 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <4 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pm8550ve@5 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <5 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pm8550vs@6 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <6 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmg1110@8 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <8 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmg1110@9 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <9 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pmr735d@a {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <10 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pm8010@c {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <12 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
pm8010@d {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <13 SPMI_USID>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
qcom,can-sleep;
|
|
};
|
|
|
|
};
|
|
|
|
thermal_zones: thermal-zones {
|
|
};
|
|
|
|
qcom,pmic_glink {
|
|
compatible = "qcom,qti-pmic-glink";
|
|
qcom,pmic-glink-channel = "PMIC_RTR_ADSP_APPS";
|
|
qcom,subsys-name = "lpass";
|
|
qcom,protection-domain = "tms/servreg", "msm/adsp/charger_pd";
|
|
depends-on-supply = <&ipcc_mproc>;
|
|
|
|
battery_charger: qcom,battery_charger {
|
|
compatible = "qcom,battery-charger";
|
|
};
|
|
|
|
ucsi: qcom,ucsi {
|
|
compatible = "qcom,ucsi-glink";
|
|
};
|
|
|
|
altmode: qcom,altmode {
|
|
compatible = "qcom,altmode-glink";
|
|
#altmode-cells = <1>;
|
|
};
|
|
};
|
|
|
|
qcom,pmic_glink_log {
|
|
compatible = "qcom,qti-pmic-glink";
|
|
qcom,pmic-glink-channel = "PMIC_LOGS_ADSP_APPS";
|
|
|
|
qcom,battery_debug {
|
|
compatible = "qcom,battery-debug";
|
|
};
|
|
|
|
qcom,charger_ulog_glink {
|
|
compatible = "qcom,charger-ulog-glink";
|
|
};
|
|
|
|
pmic_glink_debug: qcom,pmic_glink_debug {
|
|
compatible = "qcom,pmic-glink-debug";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
depends-on-supply = <&spmi1_bus>;
|
|
|
|
};
|
|
|
|
pmic_glink_adc: qcom,glink-adc {
|
|
compatible = "qcom,glink-adc";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#io-channel-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "tuna-gdsc.dtsi"
|
|
|
|
&cam_cc_ipe_0_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_ofe_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_tfe_0_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_tfe_1_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_tfe_2_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
status = "ok";
|
|
};
|
|
|
|
&cam_cc_titan_top_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_MM_MXC_VOTER_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&disp_cc_mdss_core_gdsc {
|
|
compatible = "regulator-fixed";
|
|
status = "ok";
|
|
};
|
|
|
|
&disp_cc_mdss_core_int2_gdsc {
|
|
compatible = "regulator-fixed";
|
|
status = "ok";
|
|
};
|
|
|
|
&eva_cc_mvs0_gdsc {
|
|
clocks = <&gcc GCC_EVA_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
status = "ok";
|
|
};
|
|
|
|
&eva_cc_mvs0c_gdsc {
|
|
clocks = <&gcc GCC_EVA_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_MM_MXC_VOTER_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_pcie_0_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_pcie_0_phy_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_MX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_ufs_mem_phy_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_MX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_ufs_phy_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_usb30_prim_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gcc_usb3_phy_gdsc {
|
|
compatible = "qcom,gdsc";
|
|
parent-supply = <&VDD_MX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gpu_cc_cx_gdsc {
|
|
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>;
|
|
parent-supply = <&VDD_CX_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&gx_clkctl_gx_gdsc {
|
|
parent-supply = <&VDD_GFX_MXC_VOTER_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&video_cc_mvs0_gdsc {
|
|
clocks = <&gcc GCC_VIDEO_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
status = "ok";
|
|
};
|
|
|
|
&video_cc_mvs0c_gdsc {
|
|
clocks = <&gcc GCC_VIDEO_AHB_CLK>;
|
|
clock-names = "ahb_clk";
|
|
parent-supply = <&VDD_MM_MXC_VOTER_LEVEL>;
|
|
status = "ok";
|
|
};
|
|
|
|
&reserved_memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
aop_cmd_db_mem: aop_cmd_db_region@81c60000 {
|
|
compatible = "qcom,cmd-db";
|
|
no-map;
|
|
reg = <0x0 0x81c60000 0x0 0x20000>;
|
|
};
|
|
|
|
adsp_mem_heap: adsp_heap_region {
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0xC00000>;
|
|
};
|
|
|
|
cdsp_secure_heap_cma: secure_cdsp_region { /* Secure DSP */
|
|
compatible = "shared-dma-pool";
|
|
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
|
|
reusable;
|
|
alignment = <0x0 0x400000>;
|
|
size = <0x0 0x4800000>;
|
|
};
|
|
};
|
|
|
|
#include "tuna-pinctrl.dtsi"
|
|
#include "tuna-stub-regulators.dtsi"
|
|
#include "tuna-usb.dtsi"
|
|
#include "tuna-qupv3.dtsi"
|
|
#include "msm-rdbg.dtsi"
|
|
#include "tuna-pmic-overlay.dtsi"
|
|
#include "tuna-walt.dtsi"
|
|
|
|
&qupv3_se7_2uart {
|
|
status = "ok";
|
|
};
|