6d44454ad1
Compatible strings for the PM8008 chip and PM8010 regulator nodes
were removed during the bulk DT porting for Ravelin on qcom-6.6
device-tree branch
'commit 1b78f8027a ("ARM: dts: msm: Add initial device tree
for ravelin")'.
Add them back to enable the PM8010 regulator support.
While at it, remove the PM8010's REVID device node references as
they are not required for Ravelin.
Change-Id: Iec11cd246f86e35d0330103143182c6aee94959e
Signed-off-by: Shilpa Suresh <quic_c_sbsure@quicinc.com>
660 lines
13 KiB
Plaintext
660 lines
13 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/iio/qcom,spmi-adc7-pm6450.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include "pmk8350.dtsi"
|
|
#include "pm6450.dtsi"
|
|
|
|
&soc {
|
|
reboot_reason {
|
|
compatible = "qcom,reboot-reason";
|
|
nvmem-cells = <&restart_reason>;
|
|
nvmem-cell-names = "restart_reason";
|
|
};
|
|
|
|
pmic-pon-log {
|
|
compatible = "qcom,pmic-pon-log";
|
|
nvmem = <&pmk8350_sdam_5>;
|
|
nvmem-names = "pon_log";
|
|
};
|
|
};
|
|
|
|
&pmk8350 {
|
|
/delete-node/ pon_pbs@800;
|
|
/delete-node/ pon_hlos@1300;
|
|
|
|
pon_hlos@1300 {
|
|
compatible = "qcom,pm8998-pon";
|
|
reg = <0x1300>, <0x800>;
|
|
reg-names = "pon_hlos", "pon_pbs";
|
|
qcom,log-kpd-event;
|
|
|
|
pwrkey {
|
|
compatible = "qcom,pmk8350-pwrkey";
|
|
interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
|
|
linux,code = <KEY_POWER>;
|
|
};
|
|
|
|
resin {
|
|
compatible = "qcom,pmk8350-resin";
|
|
interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmk8350_vadc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&quiet_therm_default &wide_rfc_therm_default
|
|
&rear_cam_flash_therm_default &pa_therm2_default &pa_therm1_default>;
|
|
|
|
/delete-node/ pm8350_ref_gnd;
|
|
/delete-node/ pm8350_vref_1p25;
|
|
/delete-node/ pm8350_die_temp;
|
|
/delete-node/ pm8350_vph_pwr;
|
|
|
|
/delete-node/ pm8350b_ref_gnd;
|
|
/delete-node/ pm8350b_vref_1p25;
|
|
/delete-node/ pm8350b_die_temp;
|
|
/delete-node/ pm8350b_vph_pwr;
|
|
/delete-node/ pm8350b_vbat_sns;
|
|
|
|
/delete-node/ pmr735b_ref_gnd;
|
|
/delete-node/ pmr735b_vref_1p25;
|
|
/delete-node/ pmr735b_die_temp;
|
|
|
|
/delete-node/ pmr735a_ref_gnd;
|
|
/delete-node/ pmr735a_vref_1p25;
|
|
/delete-node/ pmr735a_die_temp;
|
|
|
|
/* PM6450 Channel nodes */
|
|
pm6450_ref_gnd {
|
|
reg = <PM6450_ADC7_REF_GND>;
|
|
label = "pm6450_ref_gnd";
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
|
|
pm6450_vref_1p25 {
|
|
reg = <PM6450_ADC7_1P25VREF>;
|
|
label = "pm6450_vref_1p25";
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
|
|
pm6450_die_temp {
|
|
reg = <PM6450_ADC7_DIE_TEMP>;
|
|
label = "pm6450_die_temp";
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
|
|
pm6450_quiet_therm {
|
|
reg = <PM6450_ADC7_AMUX1_GPIO2_100K_PU>;
|
|
label = "pm6450_quiet_therm";
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
|
|
pmk8350_wide_rfc_therm {
|
|
reg = <PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
|
label = "pmk8350_wide_rfc_therm";
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
|
|
pm6450_rear_cam_flash_therm {
|
|
reg = <PM6450_ADC7_AMUX4_GPIO5_100K_PU>;
|
|
label = "pm6450_rear_cam_flash_therm";
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
|
|
pm6450_pa_therm2 {
|
|
reg = <PM6450_ADC7_AMUX3_GPIO4_100K_PU>;
|
|
label = "pm6450_pa_therm2";
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
|
|
pmk8350_pa_therm1 {
|
|
reg = <PMK8350_ADC7_AMUX_THM3_100K_PU>;
|
|
label = "pmk8350_pa_therm1";
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
|
|
pm8010_e: qcom,pm8010@4 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <4 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8010e_tz: pm8010-e-temp-alarm@2400 {
|
|
compatible = "qcom,spmi-temp-alarm";
|
|
reg = <0x2400>;
|
|
interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmk8350_adc_tm {
|
|
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>,
|
|
<&pmk8350_vadc PM6450_ADC7_AMUX1_GPIO2_100K_PU>,
|
|
<&pmk8350_vadc PMK8350_ADC7_AMUX_THM2_100K_PU>,
|
|
<&pmk8350_vadc PM6450_ADC7_AMUX4_GPIO5_100K_PU>,
|
|
<&pmk8350_vadc PM6450_ADC7_AMUX3_GPIO4_100K_PU>,
|
|
<&pmk8350_vadc PMK8350_ADC7_AMUX_THM3_100K_PU>;
|
|
|
|
pmk8350_xo_therm {
|
|
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
|
|
pm6450_quiet_therm {
|
|
reg = <PM6450_ADC7_AMUX1_GPIO2_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
|
|
pmk8350_wide_rfc_therm {
|
|
reg = <PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
|
|
pm6450_rear_cam_flash_therm {
|
|
reg = <PM6450_ADC7_AMUX4_GPIO5_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
|
|
pm6450_pa2_therm {
|
|
reg = <PM6450_ADC7_AMUX3_GPIO4_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
|
|
pmk8350_pa1_therm {
|
|
reg = <PMK8350_ADC7_AMUX_THM3_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
};
|
|
|
|
&pmk8350_gpios {
|
|
wide_rfc_therm {
|
|
wide_rfc_therm_default: wide_rfc_therm_default {
|
|
pins = "gpio1";
|
|
bias-high-impedance;
|
|
};
|
|
};
|
|
|
|
pa_therm1 {
|
|
pa_therm1_default: pa_therm1_default {
|
|
pins = "gpio2";
|
|
bias-high-impedance;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmk8350_sdam_23 {
|
|
adc_scaling: scaling@bf {
|
|
reg = <0xbf 0x1>;
|
|
bits = <0 2>;
|
|
};
|
|
};
|
|
|
|
&pmk8350_sdam_1 {
|
|
ufs_dev: ufs_dev@94 {
|
|
reg = <0x94 0x1>;
|
|
bits = <0 0>;
|
|
};
|
|
};
|
|
|
|
&pm6450_gpios {
|
|
quiet_therm {
|
|
quiet_therm_default: quiet_therm_default {
|
|
pins = "gpio2";
|
|
bias-high-impedance;
|
|
};
|
|
};
|
|
|
|
rear_cam_flash_therm {
|
|
rear_cam_flash_therm_default: rear_cam_flash_therm_default {
|
|
pins = "gpio5";
|
|
bias-high-impedance;
|
|
};
|
|
};
|
|
|
|
pa_therm2 {
|
|
pa_therm2_default: pa_therm2_default {
|
|
pins = "gpio4";
|
|
bias-high-impedance;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&thermal_zones {
|
|
pm8010e_tz {
|
|
polling-delay-passive = <100>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "step_wise";
|
|
thermal-sensors = <&pm8010e_tz>;
|
|
|
|
trips {
|
|
trip0 {
|
|
temperature = <95000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
trip1 {
|
|
temperature = <115000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
trip2 {
|
|
temperature = <145000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
sys-therm-6 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
active-config1 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
sys-therm-4 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
active-config1 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
sys-therm-1 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm PM6450_ADC7_AMUX1_GPIO2_100K_PU>;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
active-config1 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
sys-therm-3 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm PM6450_ADC7_AMUX4_GPIO5_100K_PU>;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
active-config1 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
sys-therm-11 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm PM6450_ADC7_AMUX3_GPIO4_100K_PU>;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
active-config1 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
sys-therm-5 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM3_100K_PU>;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
active-config1 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
key_vol_up_default: key_vol_up_default {
|
|
mux {
|
|
pins = "gpio53";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio53";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
pm8010m_active: pm8010m-active {
|
|
mux {
|
|
pins = "gpio29";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio29";
|
|
bias-pull-up;
|
|
output-high;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
pm8010n_active: pm8010n-active {
|
|
mux {
|
|
pins = "gpio30";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio30";
|
|
bias-pull-up;
|
|
output-high;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
label = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_vol_up_default>;
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Each QUP device that's a parent to PMIC must be listed as a critical device
|
|
* to GCC
|
|
*/
|
|
&gcc {
|
|
qcom,critical-devices = <&qupv3_se8_i2c>;
|
|
};
|
|
|
|
&qupv3_se8_i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "ok";
|
|
|
|
pm8010m@8 {
|
|
compatible = "qcom,i2c-pmic";
|
|
reg = <0x8>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pm8010m_active>;
|
|
|
|
pm8010-chip@900 {
|
|
compatible = "qcom,pm8008-chip";
|
|
reg = <0x900>;
|
|
|
|
PM8010M_EN: qcom,pm8008-chip-en {
|
|
regulator-name = "pm8010m-chip-en";
|
|
};
|
|
};
|
|
};
|
|
|
|
pm8010m@9 {
|
|
compatible = "qcom,i2c-pmic";
|
|
reg = <0x9>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
qcom,pm8010m-regulator {
|
|
compatible = "qcom,pm8010-regulator";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8008_en-supply = <&PM8010M_EN>;
|
|
vdd_l1_l2-supply = <&S8B>;
|
|
|
|
L1M: pm8010m_l1: regulator@4000 {
|
|
reg = <0x4000>;
|
|
regulator-name = "pm8010m_l1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
qcom,min-dropout-voltage = <88000>;
|
|
qcom,hpm-min-load = <30000>;
|
|
};
|
|
|
|
L2M: pm8010m_l2: regulator@4100 {
|
|
reg = <0x4100>;
|
|
regulator-name = "pm8010m_l2";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
qcom,min-dropout-voltage = <80000>;
|
|
qcom,hpm-min-load = <30000>;
|
|
};
|
|
|
|
L3M: pm8010m_l3: regulator@4200 {
|
|
reg = <0x4200>;
|
|
regulator-name = "pm8010m_l3";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
qcom,hpm-min-load = <0>;
|
|
};
|
|
|
|
L4M: pm8010m_l4: regulator@4300 {
|
|
reg = <0x4300>;
|
|
regulator-name = "pm8010m_l4";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
qcom,hpm-min-load = <0>;
|
|
};
|
|
|
|
L6M: pm8010m_l6: regulator@4500 {
|
|
reg = <0x4500>;
|
|
regulator-name = "pm8010m_l6";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
qcom,hpm-min-load = <0>;
|
|
};
|
|
|
|
L7M: pm8010m_l7: regulator@4600 {
|
|
reg = <0x4600>;
|
|
regulator-name = "pm8010m_l7";
|
|
regulator-min-microvolt = <2650000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
qcom,hpm-min-load = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pm8010n@c {
|
|
compatible = "qcom,i2c-pmic";
|
|
reg = <0xc>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pm8010n_active>;
|
|
|
|
pm8010-chip@900 {
|
|
compatible = "qcom,pm8008-chip";
|
|
reg = <0x900>;
|
|
|
|
PM8010N_EN: qcom,pm8008-chip-en {
|
|
regulator-name = "pm8010n-chip-en";
|
|
};
|
|
};
|
|
};
|
|
|
|
pm8010n@d {
|
|
compatible = "qcom,i2c-pmic";
|
|
reg = <0xd>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
qcom,pm8010n-regulator {
|
|
compatible = "qcom,pm8010-regulator";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8008_en-supply = <&PM8010N_EN>;
|
|
vdd_l1_l2-supply = <&S8B>;
|
|
vdd_l3_l4-supply = <&S9B>;
|
|
|
|
L1N: pm8010n_l1: regulator@4000 {
|
|
reg = <0x4000>;
|
|
regulator-name = "pm8010n_l1";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
qcom,min-dropout-voltage = <72000>;
|
|
qcom,hpm-min-load = <30000>;
|
|
};
|
|
|
|
L3N: pm8010n_l3: regulator@4200 {
|
|
reg = <0x4200>;
|
|
regulator-name = "pm8010n_l3";
|
|
regulator-min-microvolt = <1736000>;
|
|
regulator-max-microvolt = <3312000>;
|
|
qcom,hpm-min-load = <0>;
|
|
qcom,min-dropout-voltage = <120000>;
|
|
};
|
|
|
|
L4N: pm8010n_l4: regulator@4300 {
|
|
reg = <0x4300>;
|
|
regulator-name = "pm8010N_l4";
|
|
regulator-min-microvolt = <1704000>;
|
|
regulator-max-microvolt = <1900000>;
|
|
qcom,hpm-min-load = <0>;
|
|
qcom,min-dropout-voltage = <152000>;
|
|
};
|
|
|
|
L6N: pm8010n_l6: regulator@4500 {
|
|
reg = <0x4500>;
|
|
regulator-name = "pm8010n_l6";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
qcom,hpm-min-load = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm6450_pwm_1 {
|
|
status = "ok";
|
|
};
|
|
|
|
&pm6450_gpios {
|
|
lcd_backlight_ctrl {
|
|
lcd_backlight_pwm_default: lcd_backlight_pwm_default {
|
|
pins = "gpio7";
|
|
function = "func1";
|
|
input-disable;
|
|
output-enable;
|
|
bias-disable;
|
|
power-source = <1>; /* 1.8V */
|
|
qcom,drive-strength = <2>;
|
|
};
|
|
|
|
lcd_backlight_en_default: lcd_backlight_en_default {
|
|
pins = "gpio6";
|
|
function = "normal";
|
|
input-disable;
|
|
output-enable;
|
|
bias-disable;
|
|
power-source = <0>;
|
|
qcom,drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|