Remove maxcpus from command line to boot all cores.
Change-Id: Ifaf03a66e36d7a0fc1236f22f8126a14513bbdf9
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Enable dma heap headers which was commented due to unmet
dependencies.
Change-Id: I46b380ff564a602cb85826407c76bf7c9324f50c
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Add the USB3_GDSC-supply property to the usb device to vote for GDSC and
avoid it being turned off in sync-state.
Change-Id: I33e88f1f3e2c0843f5a049cc3b22d348d261f3e2
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Replace the stub-regulator devices for ARC managed PMIC regulators
with rpmh-regulator devices. This ensures that consumers are able
to modify the physical state of these PMIC regulators. This is
particularly important for VDD_MMCX as it gates many multimedia
blocks in hardware.
Change-Id: I1287233d2e6aa22ef5ebd23951e5c61b8a1acae1
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Unstub the dispcc device so that it starts controlling HW.
Change-Id: I548b5eb65c80032057877f15fa4abe0be42417e1
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
The mem-buf device provides memory related services for shared memory
between host and guest VMs.
Change-Id: Iade8224fbea6985c69af9cd30d1c441983e91147
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add the secure-buffer device, which supports hypervisor operations
to change the stage 2 permissions of memory.
Change-Id: I98576bc919aecada2e7ab7bc5dfeadc8979a111d
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
USB controller device doesn't probe due to remote-endpoint depedency
with ucsi device. ucsi device won't be probed as ADSP firmware is
not being loaded. Hence remove ucsi port related remote-endpoint
configuration on pineapple.
While at it, also remove dependency on EUD driver.
Change-Id: I161afb62e63ebeeb13ee5af7b43408c697fd59d6
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Some GDSCs are enabled from bootloaders and need the proxy-consumer to
ensure they stay on until after their associated CC has probed and
enabled clocks that depend on them.
Change-Id: I6801742fb80d62b16153a0973696b82972a22806
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Enable cluster 0 cores from the command line instead of just
core 0.
Change-Id: I26b97122d353b3979467109babfded9a095b207d
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
With 16GB of DDR, existing drivers were trying to use 6Mb as follows:
2Mb: dma_atomic_pool_init(GFP_KERNEL)
2Mb: dma_atomic_pool_init(GFP_KERNEL | GFP_DMA32)
2Mb: qcom_iommu_util::dma_atomic_pool_init
Increase the reserved size to 12Mb to leave a small margin.
Change-Id: Id9bdfcca7560d40bddf3c9c526f9e3ee69ba9174
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add the device tree properties to the smem reserved memory region that
to match allows the smem driver to match and probe accordingly.
Change-Id: I4e0bdf3d26a9d0f7cf15a569e08988dddadf8183
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Switch to enable SMMU for the USB controller on sun.
Change-Id: I9b43a167beb2ab971ce48bbc5f03bf62512addc2
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Add the psci node and change the cpu enable method to psci
on the sun SoC.
Change-Id: I86f747a87169172ac215885c6de0e19be921f99f
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Change the sun rumi dt file to compile as an overlay.
Change-Id: I56dcc5349eac12c660981da0fc75f0173b27197a
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Adjust arch timer and memtimer frequencies on the sun RUMI to stop
IRQ storms during boot.
Change-Id: Ic34a125763701ec115db82cd5ed5259fb3bd9a28
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Add tz-log node for Sun which gets updated by Resource Manager.
With out this node, device tree overlay fails.
Change-Id: I9d54da4cf32272176e12d3cd49bc21f20e688f30
Signed-off-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Add stdout to chosen node for sun SoC and set maxcpus to 1.
Change-Id: I2633e4f96f3f9cbc047334200fc42921a5f5d6f7
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Enable USB related properties for USB functionality on sun.
Change-Id: Ibb522859494c0e939b46a6b790448fc2e62bd37e
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Describe the registers of the QTB devices, and also add
devices for test purposes.
Change-Id: Ieee39df8ac89d62479a10b92c8a8c4421fcf88fc
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
