This change adds the entries of qusb phys and
usb bam in yaml format.
Change-Id: I5697f28cf786ab6cc61c462a164ff4b0e4e68aac
Signed-off-by: Rajkumar Patel <quic_rajkpate@quicinc.com>
The vbus_dwc3-supply property in the device tree manages
the 5V for USB host mode.
It is designed for platforms with hardware VBUS detection
based on a GPIO regulator, allowing the system to control
the USB port power supply, enabling or disabling
it in suspend/resume cases.
Change-Id: Ic33147b08a8efd3a3fa015e6847e2874a83b386b
Signed-off-by: Rajashekar kuruva <quic_kuruva@quicinc.com>
Some target require refgen to operate. For this an additional ldo
which will be exposed and the driver need to vote for proper phy
functionality.
Add a phandle which will be used in the driver to identify the
ldo and vote accordingly.
Change-Id: I15b3bcb031cefe037fbb0364bfb7b87d26489006
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Newly added optional quirk "qcom,sleep-clk-bcr" adds delay of
200-250us after deasserting the USB3 BCR. This is needed on
some targets where sleep clk is used for BCR demet.
Change-Id: I88370838c29f679f2d2d90f565d3884d48bcdff2
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Add ON Semiconductor USB Type-C and display port 10Gbps Linear Re-Driver
bindings used on MSM platforms.
Change-Id: Ia333a63a958a5a890f2743a3ec6dc51d7053b720
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
The UCSI Glink device handles the communication between OPM on
the Application processor and PPM which is charger firmware
running on the remote subsystem (e.g. DSP) over PMIC Glink.
This is a snapshot taken as of qcom-6.1
commit de2a781818d7 ("bindings: add support for qcom,ucsi-glink")
which was then converted to yaml.
Change-Id: I1ff3756302c40c88954109b6dccaf87e59e66919
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add USB PHY bindings used on MSM platforms.
Change-Id: Ifaf30337abc9b48ccad01f9b4d9aedfb877820f4
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
