Fix the SDC2 GPIO pin function names to match the tuna-pinctrl driver.
The function name like "SDC2_CMD" was incorrectly written as "sdc2_cmd"
and etc. This alignment ensures proper functioning.
Change-Id: I4fd35d3c7d4fbdf0ee1bc32ad81efc3088529265
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Add RPMH regulator devices for SMPS, LDO regulators,
found on the PMIC chips used on tuna boards, to ensure that
consumers are able to modify the physical state of these regulators.
Change-Id: Ie30bbc8ab04d75246a5ff902841981c907dc9fca
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add support for rpmh clock controller nodes on TUNA platform.
While at it, keep rpmhcc node as dummy for TUNA rumi platform.
Change-Id: I97b2a42df7886295efd8b4a176257fe45a571bae
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add pmih010x support for tuna.
While at it add sys-therm-11 for tuna.
Change-Id: Idc08213fdadb300d0eb793f422ecf9b210785db9
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add cma regions for tuivm and oemvm, inline with v1.
Change-Id: I117ad4bd3af4fb1c9c3c5bf046fdf903d3ddb99d
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add cma regions for tuivm and oemvm, inline with v2.
Change-Id: I72263dfc41eb0ecafb38bdac42e685483ba6d66c
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
This change adds to enable BCL2 node; adds bcl thermal zone
mitigations and cooling maps for pmih010x.
Change-Id: I4e4cef9a1d7064afd32ee1422bb2e5a23a31689a
Signed-off-by: Minghao Zhang <quic_minghao@quicinc.com>
This changes adds a new property for bcl pmic5 to enable
a BCL peripheral based on different battery types and
Rsense types.
Change-Id: I68c1369319db598ccfd38faa09075aed113da7f2
Signed-off-by: Minghao Zhang <quic_minghao@quicinc.com>
Add the soc-specific compatible string for qfprom to
support keepout regions on kera and tuna SoC.
Change-Id: Ia8196126bc995614fb5c72216cdd322a1b9d1613
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
For upstream and tvm, qup common driver uses gcc phandles which
are common in dt and to avoid qup driver probe failure, add gcc
qcom-dummycc support as they are nop. This helps in avoiding
additional logic in qup driver to not conditionalize based on
variant.
Change-Id: I770a2a3c0e31138891b3e298ccff8e2934ae91a1
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add thermal devicetree changes and thermal configuration
for tuna based on the recommendation.
Change-Id: I6904fca29794cc8f7615d5f540f613ef903b59aa
Signed-off-by: Nitesh Kumar <quic_nitekuma@quicinc.com>
Add support for platforms like ATP, CDP, MTP, QRD and RCM for TUIVM and
OEMVM on Tuna. Also, add support for additional Tuna variant.
Change-Id: Ie7a6c542c7d31db5b823ae10db714ddc43330598
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add the UFS's VCCQ2 parent regulator information so that
the software can perform load voting on this regulator.
Change-Id: I4ab420c0218a2f5c4d1849166318280e8acca6db
Signed-off-by: kamasali Satyanarayan <quic_kamasali@quicinc.com>
