Add ddr-regions device tree node in Tuna and Kera to optimize
boot-up time as firmware will look for this node during boot
and if it finds it early, it will save some time in bootup.
Change-Id: If3d6f3be7331870b5ecec9834de1dbebfbb6c22f
Signed-off-by: Shivendra Pratap <quic_spratap@quicinc.com>
Add stub regulator devices for the SMPS, LDO, and BOB regulators
found on the PMICs used on kera boards to allow the regulator
clients to vote on them.
Change-Id: I1ff88145cdfb7111e473653d4a26e332f93267a8
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add the bootargs entry for tuna and kera.
Change-Id: I07c281141826710d81d9b148e4eb25816d834c02
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Add the gh_watchdog node for kera and tuna.
Change-Id: I49b90fc0e4abf6a912937cd474b048c2b8178ea5
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Add support for CPUSYS_VM for Kera target.
Change-Id: I7c8f0656ff69cc4f117b8a1c17baa86fd6ec8eb5
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add list of GPIOs reserved for QUP 2 SE 6(20,21,22,23),
CXM UART1(111,112) and CXM UART2(110,116).
Change-Id: If501f5da5f732c5270438066525389001d345321
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Add the secure-buffer device, which supports hypervisor operations
to change the stage 2 permissions of memory.
Change-Id: If7a38ffd1cfa769b26b8f1d05b676f9e7eb33cf8
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add the smp2p nodes for lpaidsp, modem, cdsp and soccp for kera.
Change-Id: If037dbee45de527f6eef54776f2f5b6f1b4e108e
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Add devicetree nodes to enable qmp communication with aop and tme.
Change-Id: I4e30e6854fcb1d29ea3733d9d59bb01acfe6667b
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Add the DMA-BUF heaps node for kera. This adds default
heaps like system and secure-system heap. Clients
can add their own DMA-BUF heaps in here.
Change-Id: Iee72407be99b936e22f5cf4b5eb55b302fed5cac
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add initial memory configuration and reserved memory map
for kera, inline with v1.
Change-Id: I2b3ed445feebd6141beb59bd23e416711e17747c
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add a node for scm device and sysmon, shmbridge for Kera SoC.
Change-Id: Ied886250dba41209cac68cbe52498061bd6daf51
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Add EUD node in device tree to enable EUD driver
on Kera SoC.
Change-Id: I94aacb9b223b9935c78045bfc3de9179f3bf9871
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Enable USB related properties for USB functionality
on kera.
Change-Id: Iceb1d404dd7b4f500885064ee0e65cc8a0dc7d7c
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Add the dummy clock and gdsc handles for clients to be able to request
on them for kera platform.
Change-Id: I24fa8bf818483947760c8b87497b25bcf40be84c
Signed-off-by: Anaadi Mishra <quic_anaadim@quicinc.com>
Add pinctrl node with compatible "qcom,kera-tlmm" in order to
enable the Top Level Multiplexer (TLMM) block on Kera SoC.
Change-Id: Ie0b58783d8c77c5f6375eb6ddab5495ca5061040
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
