DWC3 host and XHCI plat now communicates the maximum number of interrupters
the XHCI HCD will allocate. Since platforms only require a limited number
of interrupters (i.e. 3) make sure XHCI doesn't allocate more than is
required.
Change-Id: I47ddfb603490afd2ab51d7c7fa9ecf844729eb62
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Enable the UFS MCQ feature on the Tuna platforms.
Change-Id: I0f420831e9af2c3965344c33a042b75196abc1d7
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Add remote debugger device configuration. The Remote Debugger driver
allows a debugger running on a host PC to communicate with a remote
stub running on peripheral subsystems.
Change-Id: I23fa75b2f830a4877aafeeb3aa27d6d4275832ed
Signed-off-by: Devender Kaushik <quic_dkaushik@quicinc.com>
Some devices refer to the GPU node that is populated in a GPU
overlay file. Provide a stub GPU dt node that can be used in the
kera devicetree.
Change-Id: Ic75d95521e0388a2c5617cf4b5fcfe82a0d9496e
Signed-off-by: Harshitha Sai Neelati <quic_hsaineel@quicinc.com>
trust_ui_vm_mem and oem_vm_mem reserved memory nodes are added twice
for Tuna. Remove one set of redundant nodes.
Change-Id: Ia71c3a0a961c00e58869921745b76b1b5d0e8a4f
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
adding dma-heaps for VM to validate QTVM platform test cases in tuna.
Change-Id: I27944f8504b69c2b7a42424f64373432305cbc40
Signed-off-by: Akhil Budampati <quic_abudampa@quicinc.com>
Currently, the interconnect path for the debug UART instance
(i.e., qupv3_se7_2uart) is not added, resulting in a NOC error
due to missing QUP voting.
To prevent the NOC error, add the interconnect path for the debug
UART instance.
Fixes: 7cb884c241 ("ARM: dts: msm: Add QUPv3 and GPI DT nodes on tuna")
Change-Id: I6a3829638a244c969d274fe118e51cac7fd0f858
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
On 6.6 kernel, clock-frequency flag name has been updated to
qcom,pcie-clock-frequency.
Update the clock-frequency dt flag name to qcom,pcie-clock-frequency.
Change-Id: I68c74d3b81ea65d30e7b8a2e8a432ad34d025077
Signed-off-by: Paras Sharma <quic_parass@quicinc.com>
Add charger PMIC changes to the kera variants.
While at it add ADC channels for pmic_glink_adc and
debug channels for pmic_glink_debug for kera platforms.
Change-Id: Iab9f94b44eca9365b84bc78c2666e4f66a344455
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add bob regulator node and update rpmh regulator
voltages as per the latest HW recommendations for kera.
Change-Id: I5e258e01c27f76038f3059315bfaf42f24ea6bdf
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Update S1G min/max & initial voltage for tuna-kiwi platform.
While at it make below changes
1.Disable the unused rails for tuna boards.
2. Update always-on property for L3G for RCM kiwi platform
for FMD feature.
Change-Id: I92e01d48b5c3cb9f64b6aa7be37c0ebb27f378b7
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Remove sys-therm-1 vadc channel as it is handled
in other subsystems.
Change-Id: If80f2f5ffcf0299ad15537189c5ef1337e8ae87e
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add cpufreq cycle counter register information to devicetree in a
separate node.
Change-Id: Ib9c21300cda585d4f25be12cb9527d719eb630ea
Signed-off-by: Atul Pant <quic_atulpant@quicinc.com>
Add the soc specific compatible for tuna7 llcc.
Change-Id: I33c1b2c62ae11c6d65f3c83e379da77f846d20b4
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Remove the list of GPIOs reserved for CXM UART2(111,112)
as it is no longer required.
Change-Id: I8fafe3005019e3df68ab6cf065d67f684401ecce
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
