* changes:
ARM: dts: msm: Add usb-role-switch and eud on kera
ARM: dts: msm: Define maximum number of USB XHCI interrupters
ARM: dts: msm: update touch io base address to spi qup node for kera
The USB D+/D- signal lines are first routed through the WCD939x USB
subsystem before connecting to the USB controller on MTP and QRD
platform for kera. Add a phandle to the former to the USB device
node. This will allow the USB driver to control the D+/D- switches
when functionality is needed.
Change-Id: Ie6e76885785cc57974d52df91297a98f300cf666
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Updated the HLOS Audio LPM memory region for Kera is causing bootup
crash.
Keep the HLOS Audio LPM memory region for Kera same as base target sun
and tuna.
Fixes: 87876b303b ("ARM: dts: qcom: Update HLOS Audio LPM memory region for kera")
Change-Id: I99ff160e4679b92dce337bd66d2ee1898a4470f0
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
Updated the HLOS Audio LPM memory region for Kera is causing bootup
crash.
Keep the HLOS Audio LPM memory region for Kera same as base target sun
and tuna.
Fixes: 87876b303b ("ARM: dts: qcom: Update HLOS Audio LPM memory region for kera")
Change-Id: I99ff160e4679b92dce337bd66d2ee1898a4470f0
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
To support cable detection events from UCSI, updates need to be made
to enable usb role switch and setting up a connection to the UCSI PMIC
glink node.
Change-Id: Ic3a848f882072a766b3efb872f943dd3f4220ba1
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
This change will add usb-role-switch and eud in Kera.
Change-Id: I74ca8c0e19b45d925bcecc78e993439441339e20
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
DWC3 host and XHCI plat now communicates the maximum number of interrupters
the XHCI HCD will allocate. Since platforms only require a limited number
of interrupters (i.e. 3) make sure XHCI doesn't allocate more than is
required.
Change-Id: I466748df07aba6d7bdc79c7b2b17b3a57c58d3d4
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Disable sys-therm-11 node for kera as it is not required in kera
platforms.
While at it disable amoled-ecm for pmiv0102 kera platforms.
Change-Id: I983c49129182d40d32efc79d062bfbf41684580b
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
- Removal of I2S0_DATA1 pin, as GPIO_63 is not
used internally for I2S purpose and it is being
used by other subsystem.
Change-Id: I7c3636f9dfcebc68ed3da95793c158e70ad95184
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Add proxy enable properties to the DSI core and panel supplies
to support continuous splash for Kera.
Change-Id: Iac767f1f9fd51159ec9650370ab7caa0a6e695a5
Signed-off-by: Abhinav Saurabh <quic_abhisaur@quicinc.com>
Kera IoT platform required pcie_1 clocks support. Add support
to model pcie_1 clocks and gdsc's for Kera IoT devices.
Change-Id: I5ada397442568c9e91b099e8cb4ea5234fb4b76e
Signed-off-by: Smeet Raj <quic_smeeraj@quicinc.com>
eUSB2 HPG revision 1.0.2 recommends to program eusb register
USB_PHY_CFG_CTRL_1 to be programmed to 0x00 on phy init.
Since this divergence is only applicable for specific version therefore
updating the override sequence with the appropriate value.
Change-Id: Iaf84875c20e9c2c030b3f81eec9348a63f081105
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Disable sys-therm-11 node for kera as it is not required in kera
platforms.
While at it disable amoled-ecm for pmiv0102 kera platforms.
Change-Id: Iadc6ef3fdddfc32789540e829f96d938f3fa2cd8
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Fix (4082b0db ARM: dts: msm: Update stdout-path with serial0 alias)
to re-enable (09b0fdef ARM: dts: msm: update kernel bootargs for kera).
While at it align the same bootargs on rumi files.
Change-Id: I032af3b9ea9a78418ef7360fc5d8b94885c6a8e6
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Signed-off-by: Vishvanath Singh <quic_vishvana@quicinc.com>
