Document tcs-distance property needed in devicetree for RSC devices.
This is an optional property which defines the distance between each
TCS for a DRV.
Change-Id: I8c01632597f40ff6856242b888610e61f7b3f15f
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Document v2, v3 and v4 compatible for various stats devices.
Change-Id: I5ba43732c07af93f7e4889d06503d4f96a2664f6
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Needed for SPU pil on sun dtsi.
Remoteproc-spss, spcom and spss_utils are disabled.
Change-Id: I97519bacccee2f7094edbcf32e3fdac29d67ac77
Signed-off-by: Nurit Lichtenstein <quic_nuritl@quicinc.com>
Dmesg dumper transfer QTI VM encrypted dmesg to PVM by dumping
the dmesg log buffer to a reserved memory location.
Change-Id: I3585f820e9dfe3f0011e210e4d6f1297734c47c3
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add nodes to enable scmi communication to cpucp on sun.
Change-Id: I574949e32e397047701f836d54115f56414ea023
Signed-off-by: Amir Vajid <quic_avajid@quicinc.com>
Add gh-msgq-test binding description and requirements which include
compatible, label and optional properties.
Change-Id: Ie894c1ca2179c9fed9b066893de03eff60749c81
Signed-off-by: Po-Jung Lai <quic_pojulai@quicinc.com>
The driver provides the framework to test memory lend to VM.
Change-Id: I90c2b17181ce9e50c037fa4997f8f9a5f6b9154b
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Adding bindings to support vm on Sun.
This is snapshot of bindings from 'commit 999a92cd8b38
("Merge "ARM: dts: qcom: Add platform support for VMs on
Cliffs"")' from device tree project msm-6.1 branch.
Change-Id: I47eda741b3451d38d215f7d95505a2bb4dd86565
Signed-off-by: Meena Pasumarthi <quic_pasumart@quicinc.com>
Signed-off-by: Sahitya Tummala <quic_stummala@quicinc.com>
Add the bindings for the QSEE IPC interrupt bridge in YAML.
QSEE IPC interrupt bridge driver can forward remote processor
interrupts to tz.
Change-Id: I1714cfc55422338c0d0674774682ab1f7ac5f4a1
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add the bindings for the smp2p sleepstate driver in YAML.
Smp2p sleepstate driver unset the SMP2P PROC_AWAKE_ID bit if Apps
is going into suspend, set it again when Apps comes out of suspend.
By reading this SMP2P bit, the remote side knows when to avoid
sending data.
Change-Id: I5ad0a431a6c9a40d2a08e9f6a864956b49e0aeab
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add the bindings for the glink_pkt driver in YAML.
Change-Id: I666732ccc56c3067187f65926cf4ec5d5645a9cc
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add binding documentation for the Qualcomm Technologies, Inc.
Glink PMIC debug controller device. This device provides an
interface to read and write PMIC registers over PMIC Glink using
a remote subsytem (e.g. DSP). This allows for debugging PMIC
peripherals that would typically only be accessible to the
charger and fuel gauging firmware running on the remote
subsystem. The PMICs may be physically connected using either
SPMI or I2C.
This is a snapshot of qcom,pmic-glink-debug.txt taken as of qcom-6.1
commit 5c116d156aae ("bindings: pmic-glink-debug: Add SPMI bridge bus
support") which was then converted to yaml format.
Change-Id: Ie4b3e188feea28b9c80413b0397eb1658e03835f
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
QTI charger ulog glink device helps to get ulogs from charging
and gauging stack by communicating with charger firmware running
on the remote subsystem (e.g. DSP) over PMIC Glink.
Change-Id: I0c9a6c2413c28c9397cc69092881e3d15f6d6577
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
