The altmode mode device provides an interface for Type-C alternate mode
clients to receive data such as Pin Assignment Notifications from the
Type-C stack running on a remote subsystem (e.g. DSP) via the PMIC GLINK
interface.
This is a snapshot taken as of qcom-6.1
commit 956e9008b1cf ("bindings: Add altmode-glink")
which was then converted to yaml.
Change-Id: Iec1cf5e64ed9b4eb93fbfa6aacc998d4f4f730e7
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
The PMIC Glink device provides the interface for clients to
communicate over GLink for sending/receiving data to/from
charger firmware that runs on a remote subsystem (e.g. ADSP)
which supports charging and gauging. Add the bindings for it.
This is a snapshot taken as of qcom-6.1
commit 2927dc2d179b ("bindings: add support for
qcom,pmic-glink") which was then converted to yaml.
Rename qcom,pmic-glink.yaml to qcom,qti-pmic-glink.yaml to
avoid a conflict with the independent upstream implementation
of this file.
Change-Id: Ia4f5ff346ebfa773bc0fe3d0410626ea67e1da31
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add rpmh-regulator device bindings for PMIC regulator management
via the RPMh hardware block on Qualcomm Technologies, Inc. SoCs.
Change-Id: Ic31ca6eae36c51a4bff9fa740913e425e64d08b1
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Add USB PHY bindings used on MSM platforms.
Change-Id: Ifaf30337abc9b48ccad01f9b4d9aedfb877820f4
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
This is a snapshot of pineapple pinctrl binding(including vm)
present on qcom-6.1 as of
commit 0b1741b63e1e ("bindings: pinctrl: pineapple: Document
qcom,i2c-pull")
commit 6f1b4c192ef9 ("bindings: Adding bindings to support vm
on Pineapple") .
Change-Id: I2f5959558dadf108c2161a6ed7ae319be210a779
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Add GCC clock controller binding for Sun device.
Change-Id: I08dc47113cb3182d1ece9b632b272c1929da33bc
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add the bindings for the msm_qmp driver in YAML.
Change-Id: I4fdddf7f88c2ba8777f0c674238b19e496e093c3
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Add interconnect device bindings for Sun. These devices can
be used to describe any RPMH and NoC based interconnect devices.
Change-Id: Ib0bc70d1400b827fdf4e4d930a794fef1426ec46
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add dummycc device bindings. These devices are used to reference
clock controllers and emulate clock operations.
Change-Id: I4f7251e6ee4475c8837375d5eea5658599f41635
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add stub-regulator device bindings. These devices can be used to
simulate any particular voltage regulator.
Change-Id: I5d15f825944747b6a0c95508219967bdd9590610
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Allow for bindings to be found via symlinks.
Change-Id: I095931fb2fb50f1886a22d793df447c358fd0b14
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
