Add devicetree support for Tuna7 and TunaP SoC.
Change-Id: I5f94559c66f00bcb746fc05f7c445a8e2501d862
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Update init mode as LPM , as L2G is kept always-on
if client is not available during boot in sleep state NPM
is voted because of init vote, update init mode to LPM.
Change-Id: I929be465451d0968cea75d486071b8593470ae9e
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
update init mode as LPM , as L11B is kept always-on
if client is not available during boot in sleep state NPM is voted
because of init vote, update init mode to LPM.
Change-Id: I6e3602106970db24ca3166ded7176791515f7901
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add glink probe driver entry for Kera to have a way for
glink core to get pm notifications during apps suspend/resume.
Change-Id: I4c3a41dfb1bcb9e28ecad040c616b563be0b5e40
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Add support for SLC MPAM. Enables support for
CPU, GPU SLC partitioning and monitoring current
capacity and read miss monitors.
Change-Id: I97d3cdafcf8c1c08733d0efc5902e72bb7a7fa91
Signed-off-by: Aman Kanwar <quic_akanwar@quicinc.com>
Update passive polling delay for GPU and Modem thermal zones for
tuna and kera.
Change-Id: Id36c9c83de822d0065f62d7f64d48201564a0404
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
The USB D+/D- signal lines are first routed through the WCD939x USB
subsystem before connecting to the USB controller on MTP and QRD
platform for kera. Add a phandle to the former to the USB device
node. This will allow the USB driver to control the D+/D- switches
when functionality is needed.
Change-Id: Ie6e76885785cc57974d52df91297a98f300cf666
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
The Kera UFS 2.x requires a reference clock of 19.2MHz. Currently,
the reference clock provided by the DTSI node RPMH_LN_BB_CLK3
returns clk_get_rate() as 38.4MHz.
To address this, the handler is updated to use clk8_a4, ensuring the
clock rate is set to 19.2MHz.
Change-Id: I92ad772c7b86652c0dc5bdc3af18a9db900d74e5
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Add support for clk8_a4 as fixed factor clock for client to be
able to request on them for Kera platform.
Change-Id: I3f6fe7e444231be4489cf4459b1f98cc19417b48
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Enable touch support for Kera ATP platform.
Change-Id: Ib4fa26a97df01d90678e5c8c98444ffb1303e0fc
Signed-off-by: Anand Tarakh <quic_atarakh@quicinc.com>
Add idle states for CPU and CPU clusters, add PSCI device to
enable CPU to enter LPMs.
Additionally, update APPS RSC device to be in cluster power
domain to handle RSC activites when cluster is powering off.
Change-Id: Ibe2fa720bc5e81084d380b2e5dc4f8fa8910566c
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Removal of I2S0_DATA1 pin, as GPIO_63 is not
used internally for I2S purpose and it is being
used by other subsystem.
Change-Id: I7c3636f9dfcebc68ed3da95793c158e70ad95184
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
