FastRPC node is added under glink node to provide intent
information. With fastrpc driver migrating to upstream
driver, this property will be overlayed from out of
kernel. Also update glink label for adsp and cdsp.
Change-Id: Ia7463d32369e02637abe4bfab5c18cf2bc8d5b03
Signed-off-by: quic_anane <quic_anane@quicinc.com>
The Sun SoC has a True Random Number Generator, add the node with
the correct compatible set.
Change-Id: I67837f8e674be6445e35b4b1512b890f43861e4f
Signed-off-by: Udit Tiwari <quic_utiwari@quicinc.com>
Add DT entry to enable the memory onject support for
smcinvoke.
Change-Id: I87b62b048e94e2aad2a8329b275bbd8d75ae6cc7
Signed-off-by: Amirreza Zarrabi <quic_azarrabi@quicinc.com>
As soon as device boots up, there are few test cases like boot KPIs
which rely on dmesg, but by the time these tests are run on Sun,
buffer is getting overwritten and test cases were failing.
To unblock the tests, increase buffer size to 512K from 256K.
Change-Id: Ie6a810297553d1a104d00f87dae3bff51dac7b95
Signed-off-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Enable the UFS MCQ feature on the Sun platforms.
Change-Id: I86016f54c57825fe4c5c51682e619bedafe4786b
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Add index table to llcc pmu for sun to override the
default register index mapping.
Change-Id: I1f470f011ddd00375bbad345432b8706ab0ae4be
Signed-off-by: Amir Vajid <quic_avajid@quicinc.com>
Add entries to specify the dev-id, net-id and low-latency fields
to configure forwarding in qrtr-mhi transport for HMT and HSP.
Forwarding via APPS qrtr-mhi should be disabled in case of HMT
(dev-id:1107) since there's a direct MHI satellite path between
ADSP and WLAN, and should be enabled for HSP (dev-id:1103).
Change-Id: I1ef7b543dcff3d187efcf5f7cfd8ac8587c55bd6
Signed-off-by: Sarannya S <quic_sarannya@quicinc.com>
The CPUCP SCMI notifications are used for thermal limits. Add the
mailbox used for them.
Change-Id: I51eadabe997670190414b9b767439be5064046c7
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Memshare driver allocates and share the memory with the modem
clients for their use. The device tree information for memshare
driver on sun are added to specify client details of gps, ftm
and diag.
Change-Id: I2dbe8729da13e40cebf4b2fd2e0722eb97c50f9e
Signed-off-by: Manoj Prabhu B <quic_bmanoj@quicinc.com>
qcom,dload-mode platform device is created from scm driver on
scm driver probe and now there is no need to maintain their
device tree node in SoC specific device tree.
Change-Id: Id79e5f67c57940b37bdfa151c90a9e1b02eb8192
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
SOCCP sleep status register is incorrectly set to 0x9a000, correct it.
Change-Id: I8533e9788614dbb4862ddd272caee7e76b96ed7e
Signed-off-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Add show_resume_irq device to print wakeup irq during resume from s2idle
or s2ram.
Change-Id: I1344bd7bb6e576cdd73011c845645c4959e23b64
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Enforce dependency of dma heap driver on SCM driver
without which it will not work and this is in
the preparation of adding interconnect voting
in SCM node which if it gets added without this
change dma heap driver can result in NULL pointer
issue.
Change-Id: I654e69398643b2e78d180c7167b29b62e7914f77
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Another memshare peripheral needs 5 Mb of memory.
Change-Id: I7928d61c5201d86c5409ac31fbfc104eba140f55
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add "qcom,subsys-name" and "qcom,protection-domain" to PMIC Glink
device so that it can handle subsystem restart (SSR) and protection
domain restart (PDR) notifications and pass the state transitions
to its clients on Sun platforms.
Change-Id: I8fa6c769e4cbe82371416edaaf9f75b685e16092
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Update the reserve gpios for Sun SoC as these
are not going to be used by linux and accessing
them by default can result in XPU fault.
Change-Id: I0c95d3df1f91584a77956f0beffebf1b63141c9f
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Support the memshare device, which requires 6 Mb.
Change-Id: I1d72bdf7cdb895fbe76e49ad3541fa715bddf24d
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Enable apss cpu ncc0, ncc1 measure nodes to support cluster l, m
clk measure.
Change-Id: Ib691fb4254f41c64639e8f2e36c0d009336576c3
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Add memshare nodes for client ids 5 and 6 which will be used for the
qmc use case. One of these nodes will allocate memory from a reserved
memory range while the other allocates from system cma.
Change-Id: I9deda5ba526c9d7e44e639fd97ca0825a1de357f
Signed-off-by: Tony Truong <quic_truong@quicinc.com>
Add a dependency between the gh-watchdog and pmic-pon-log devices
for Sun boards. This ensures that during system boot-up, the driver
responsible for the gh-watchdog device initializes before the one
responsible for the pmic-pon-log device.
This behavior is critical to ensuring that a PMIC warm-reset correctly
occurs in the situation that the qcom,pmic-fault-panic property is
specified for the pmic-pon-log device and the previous system
power-off was caused by a PMIC fault.
Change-Id: I8c40b19ce150ca5bb3cb9514c7d293481a5009af
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Update llcc gold bwmon name to correctly distinguish
its base address.
Change-Id: Id8c431e4093894c719731e88cd807b9a30de7559
Signed-off-by: Amir Vajid <quic_avajid@quicinc.com>
