Enforcing access restrictions for eSE secure GPIO
by tagging it as reserved.
Change-Id: Ia525cafe06689708d323ddbc6b65f9ddc4b4647a
Signed-off-by: PRANAY BHARGAV BHAVARAJU <quic_pbhavara@quicinc.com>
Although this is already present in CONFIG_CMDLINE in gki_defconfig, it
appears to be being overridden by the commandline specified in devicetree.
Change-Id: If61b4cfd11a15a7c36fb01875b7c77ac7c5bde8b
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Setting dma32_disable causes all memory to be placed in ZONE_NORMAL,
and reduces overhead in page allocation.
Change-Id: I770fe2688081b457a121afd23d6d924423680e5f
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Add 4.5 MB for use by minidump_memory driver.
Add 2 MB for use by memshare IMS usecase.
Change-Id: I5f3897e24dd4b7a1c7bd3f883c4837eaa3ca384a
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Fix the interrupt line for wdog INT to EDGE triggered.
Change-Id: Id9ca3f3a632b95bfa17cedacda0936845413ded1
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
qcom,ramoops driver takes memory dynamically
available from a given range and give it to
ramoops for its usage.
Change-Id: I94ece0f9d25719e240ecb5c7f47a3b1fe83fbab1
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Loadable section memory of FingerPrint(FP) Sensor TA
has to be increased which requires increase in qseecom_ta mem.
Change-Id: Ie0a31662cd7b05f3aff0a41c275089ed7684d8b0
Signed-off-by: Akhil Budampati <quic_abudampa@quicinc.com>
Add the list of PCIe SM registers that need to be dumped
to the PCIe dt node in sun.
Change-Id: Ic2e0518ac611ef5e409f88dcd0f69eb2ce4d8566
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Removed SP PBL Patch Version Register from sun dtsi
since it is no longer used.
Change-Id: I52b28ed1a07676188a39c09b72c0e2364cfc0ac2
Signed-off-by: Magesh M <quic_murugan@quicinc.com>
Currently, charger FW configures and enables ship mode in parallel with
shutdown activity. This can cause a race condition leaving the device in
a bad state if the device is powering off while SW is still issuing SPMI
writes.
Add the battery charger "qcom,ship-mode-immediate" property on Sun
platforms so that ship mode will be configured immediately by charger FW
after user sets ship_mode_en.
Change-Id: I55a78c7b5c59b8b82519713fb4267d081c54a92f
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Currently, charger FW configures and enables ship mode in parallel with
shutdown activity. This can cause a race condition leaving the device in
a bad state if the device is powering down while SW is still issuing SPMI
writes.
Add new "qcom,ship-mode-immediate" property to flag that ship mode should
be immediately configured after user sets ship_mode_en to avoid this
race condition.
Change-Id: I16b1e307cac8befff7a1136de1cb522e03a95c46
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add compatible strings for Ravelin and RavelinP SoCs.
Change-Id: Ibf00b144c1798024fec669545e4fbeeefe5b21c9
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Add the pm8550_pa_therm2 ADC channel as well as the corresponding
thermal zone device which can be used by thermal SW.
Change-Id: I2c583ca8c00a67a122b6c1b7622436bcf8058165
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Configure the L1F and L3G active-only regulator to be always enabled
in high power mode (HPM). These regulators power REFGENs and PLLs
used by the application processor itself. Unconditional active-only
voting is needed since the software running on the application
processor won't be capable of removing L1F and L3G votes after the
application processor subsystem is power collapsed.
Change-Id: I750da467f408f35b6015a2286696609f234abdc4
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add active-only and sleep-only regulator subnodes for rpmh-regulator
devices L1F and L3G on Sun boards. This allows requests to be issued
for them that are tied to the application processor's power collapse
state.
Change-Id: Ia8fd8c3aef5c5abfec1044ba3287b1a59f1d5824
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add qcom,ramoops binding for its device and it is exactly copy of
ramoops device but differ in just memory is dynamically reserved
during early boot.
Change-Id: I2b2b288061ba001aa8cc9a73fad1176a01ce4769
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Add dynamic ATID support for remote etm and non HLOS related TPDM.
Change-Id: Ib20d304b27377e19ca347e81eab587de41713ed0
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
