Set regulator-always-on for VDD_MMCX and VDD_MXC on Sun
RUMI. This ensures that clock controller register values
are maintained since RUMI isn't simulating register
retention across VDD_MMCX or VDD_MXC power collapse.
Change-Id: I5adaa243066df64f6f04f569a05eb124734d7611
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Define adsp mem heap region for adsp-mem device. Also
add documentation for the same.
Change-Id: Icce88b87c28797ff51ba5b0d885706d3a903eee3
Signed-off-by: Anirudh Raghavendra <quic_araghave@quicinc.com>
Add the bindings for the qrtr-mhi driver in YAML.
MHI based qrtr is the transport used for communicating
to external modems.
Change-Id: I31ed0e57955c74d9fa628fe05ed7b9ebbd004b36
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add documentation for memshare driver device tree bindings
aligning to new requirement.
Change-Id: I1da604c4c444044ac4c2dd25037d11900ebe8a79
Signed-off-by: Manoj Prabhu B <quic_bmanoj@quicinc.com>
Add bi_tcxo_ao phandle for camcc, dispcc and evacc on Sun.
Change-Id: Ibece684c5010c9b32ec92228f4c2e9811e69e323
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Qualcomm Technologies, Inc. AMOLED ECM provides a method to measure
OLED display power/current consumption. Add the bindings necessary to
describe it.
This is a snapshot of qcom,amoled-ecm.yaml taken as of qcom-6.1
commit f2d83cefcff8 ("dt-bindings: qcom,amoled-ecm: add
display-panels property").
Change-Id: If2644e7f2a6ee39c7a2c866377012bbb208fd75b
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add bindings for the I2C PMIC Controller. This device handles
interrupts from an I2C PMIC and supports various subnodes which
each correspond to a PMIC peripheral (e.g. LDO regulator, GPIO,
etc).
Change-Id: I83528bd1239f1eb645f17a579216edc616ff2fcd
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Remove the usb-role-switch property for pineapple target.
USB SW driver will assume that the USB cable is connected and
enumerate w/the PC.
Change-Id: I6f2f1b292792bc064722fdeff3807ea4c3fa5a53
Signed-off-by: Bruce Levy <quic_blevy@quicinc.com>
Unstub tcsrcc for Sun. Also shrink the tlmm
region to avoid overlaps, but that tlmm doesn't
use anything past where we're shrinking it.
Change-Id: Id9f09105ad959ba9c9f44b2cb3912e1f93bba3b3
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Add the smp2p nodes for lpaidsp, modem, cdsp and soccp for sun.
Change-Id: I9664b57fbb8f39e5edbadfad66882d97fe1634d3
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Add the nodes to describe the QMP devices to communicate with AOSS and
TME.
Change-Id: Iaac6b401e3554ce696a9faf5abaeb16717ff0907
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Add PDC interrupt controller to support wake irqs.
Change-Id: I459a68079611f7ed08977b2296b7d4377eb649ee
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Qualcomm Technologies, Inc. (QTI) High Voltage (HV) PMIC haptics
modules can support up to 10 V voltage to drive either ERM or LRA.
It has an integrated module to support auto resonance detection
and correction for LRA actuator. It can play different vibration
effects with different pattern sources. It also has an integrated
brake module which can work in different modes to use BEMF for
quick vibration stop.
This is a snapshot of qcom-hv-haptics.txt as of qcom-6.1 branch
commit 3bb6ba2f4e26 ("bindings: qcom-hv-haptics: add
"qcom,primitive-id" property") which was converted to yaml
format.
Change-Id: I7ef8f804e6acacdedaae7fb2789641779e45d01d
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Flash LED compatible string has been updated from "qcom,pm8350c-flash-led"
to "qcom,qti-pm8350c-flash-led" in Sun. Update existing usage of the
old compatible from Pineapple dtsi files found in Sun.
Change-Id: Ib062510cd6561e57973cca336d2a5b04884ec5d8
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Flash LED device provides support for the clients to turn ON/OFF LED
channels in different modes (flash/torch) individually or as a group.
Add the bindings necessary to describe it.
This is a snapshot taken as of qcom-6.1 branch
commit b8790c7e1f77 ("dt-bindings: leds: leds-qti-flash: Add
support for external LED setup").
Change-Id: Icbdcb3aa794d999b2edb9995f73b00fe4ccb34d1
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add the bindings for the QSEE IPC interrupt bridge in YAML.
QSEE IPC interrupt bridge driver can forward remote processor
interrupts to tz.
Change-Id: I1714cfc55422338c0d0674774682ab1f7ac5f4a1
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add the bindings for the smp2p sleepstate driver in YAML.
Smp2p sleepstate driver unset the SMP2P PROC_AWAKE_ID bit if Apps
is going into suspend, set it again when Apps comes out of suspend.
By reading this SMP2P bit, the remote side knows when to avoid
sending data.
Change-Id: I5ad0a431a6c9a40d2a08e9f6a864956b49e0aeab
Signed-off-by: leihan <quic_leihan@quicinc.com>
