Add dtsi node to enable Hardware key manager for monaco target.
And add the device tree bindings for the Hardware key manager driver.
Change-Id: If1e38c3c71148fd85058eb31d4eee5f806e47fef
Signed-off-by: Shivangi Kesharwani <quic_skesharw@quicinc.com>
Add parrot qfprom compatible string so that data can be
attached to it in the driver.
Change-Id: Ib69c0438446f6493d4a66c3453f1a878ccc0b10a
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Add bindings documentation for qcom,pmic-ecid. PMIC ECID provides the
PMIC specific information for identification.
Change-Id: I012670359ad1b1c4aea92f59b9430efc6e446f5f
Signed-off-by: Brindha T<quic_brint@quicinc.com>
Add support for offlining CPUs during VM load for Parrot.
Change-Id: Id5dad4d40375942a2f8ad671345390ecfc7a3926
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
Add display mx clock controller bindings on sun device.
Change-Id: Ie8c87b285bdf5278585bfee42b0eeff70397ce9d
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Add devicetree bindings for the schgm-flash driver.
Change-Id: Id9da37b6dd5a33f1d6028007237d2e4fc763534c
Signed-off-by: Varshitha H N <quic_vhn@quicinc.com>
Remove the force-low-pwm-size property and add the mid-res-support
property. PM6450 does not have support for 76.8Mhz clock source, but
PM6450 has the same subtype which detects high resolution support. Add
medium resolution support which removes 76.8Mhz support and uses the
other 3 clock sources.
Change-Id: I8ba5f28c441ddab5321a7ba24b09424c7f31b538
Signed-off-by: Shilpa Suresh <quic_c_sbsure@quicinc.com>
The vbus_dwc3-supply property in the device tree manages
the 5V for USB host mode.
It is designed for platforms with hardware VBUS detection
based on a GPIO regulator, allowing the system to control
the USB port power supply, enabling or disabling
it in suspend/resume cases.
Change-Id: Ic33147b08a8efd3a3fa015e6847e2874a83b386b
Signed-off-by: Rajashekar kuruva <quic_kuruva@quicinc.com>
Add support for interconnect for sdxbaagha platform.
Change-Id: Ia59ecee142ff7bc4583e44b1e92a6bdcb592a337
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Some target require refgen to operate. For this an additional ldo
which will be exposed and the driver need to vote for proper phy
functionality.
Add a phandle which will be used in the driver to identify the
ldo and vote accordingly.
Change-Id: I15b3bcb031cefe037fbb0364bfb7b87d26489006
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Add support for the following LCDB devicee tree properties:
"qcom,ncp-symmetry" to make NCP voltage follow LDO voltage directly.
"qcom,high-p2-blank-time-ns" to control the higher clamp threshold for
p2 minimum on time.
"qcom,low-p2-blank-time-ns" to control the lower clamp threshold for
p2 minimum on time.
"qcom,mpc-current-thr-ma" to control the mpc threshold for inductor
current after start up is done.
Change-Id: I873d177fd71da7a98aa043f1b30db7c42a6cd803
Signed-off-by: Ashok Kadavul <quic_asholnu@quicinc.com>
