Add CPU hotplug and pause cooling device to hotplug or pause any
CPU under thermal conditions on sun. Added the respective pause and
hotplug cooling maps to the CPUs and added cooling-cells property for
each CPU.
Change-Id: I6753ee0d77511d58ba313707381f2e0b9114eeed
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Make changes to enable IPA SMP2P nodes for sun to
communicate with modem.
Change-Id: Ia2cf79f51ea3d164d82be5db53aa2163e0c5f799
Signed-off-by: Chaitanya Pratapa <quic_cpratapa@quicinc.com>
Add flash, torch, and switch devices from PM8550 flash LED device to
support camera flash use cases on Sun boards.
Change-Id: Ieb78a7ab63709f04489024e8fcaf8f14de90347e
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add M31 eUSB2 and QMP SS PHY nodes to sun. Add required dependencies in
pinctrl as well for HW based SS lane detection.
Change-Id: Ib1546aa7d92853a88a05d0bbc836ec4caac40960
Signed-off-by: Ronak Vijay Raheja <quic_rraheja@quicinc.com>
Add DT bindings for SPI which provides the resource management details
for the Q2SPI geni msm driver.
Change-Id: I1142c87b437177ec7587f8c0f1a823fbdb1c7fbb
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
For upstream and tvm qup common driver uses gcc phandles which
are common in dt and to avoid qup driver probe failure qcom-dummycc
is added as they are nop. This helps in avoiding additional logic
in qup driver to not conditionalize based on variant.
Change-Id: Ie91b01b583a4482d8fa5e6eb2922a8e914876657
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Enable tlmm VM mem access device tree nodes for Sun.
Change-Id: Ibb4ec4d8b4e50ba5b52b0af9346c8c6c32dfb5d2
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
When this "qcom,uses_level_shifter" DT entry is present
but "qcom,external-fb-clk" is not present, the SD card's
HS50 mode is run at 37.5MHz clock. This is to work around
a latency issue caused by the addition of the Level Shifter
logic. In order to use the 50MHz clock in HS50 mode, there
are two ways:
- Keep "qcom,uses_level_shifter" and "qcom,external-fb-clk"
and make sure the Feedback Clock (FB CLK) connection between
the Level Shifter and the MSM must be good.
- Remove "qcom,uses_level_shifter" from DT.
Please note that the "qcom,external-fb-clk" depends on
"qcom,uses_level_shifter", only set "qcom,external-fb-clk"
would not take effect.
Change-Id: Ib3a4cf5c9c20e2094556c3196d91b7e9723e0a1e
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Due to RUMI limitations only HS mode is supported on RUMI for SD cards,
add DT flag is_rumi for sun RUMI to enable SD card on HS mode.
Change-Id: Ib962ddb24cf89f2058760d1cfbff80db058fd216
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Add SD card support for mtp/cdp/qrd sun platforms.
Change-Id: I40ea8c28354040dd7417d6401d60613226c495f4
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
The Remote Debugger driver allows a debugger running
on a host PC to communicate with a remotestub running
on peripheral subsystems.
This snapshot was taken as of msm-4.14 commit.
Change-Id: I30ef2c9b67904f80867df82552572978ab09a05c
Signed-off-by: Devender Kaushik <quic_dkaushik@quicinc.com>
Disable low power modes for sun through kernel command
line parameters.
Change-Id: Icbd6d6637f5532380048b51c5cbba5a790526c5b
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Update apps_rsc to include new tsc-distance field to the specify the
TCS distance offset for each DRV for sun. Add disp_rsc and cam_rsc
devices for RPMh communication and add new tcs-distance property for
each DRV on sun.
Change-Id: Iad900a9b60cd8f52b99f29e4db0c85397c723ecf
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Document tcs-distance property needed in devicetree for RSC devices.
This is an optional property which defines the distance between each
TCS for a DRV.
Change-Id: I8c01632597f40ff6856242b888610e61f7b3f15f
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Document v2, v3 and v4 compatible for various stats devices.
Change-Id: I5ba43732c07af93f7e4889d06503d4f96a2664f6
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Add SPS module to device tree. SPS (Smart Peripheral System)
enables the support of all BAMs in the system which provide DMA
functionality to various peripherals for SUN.
Change-Id: I4b69ad41de0a27921b5cd050b589e7ab7af406e3
Signed-off-by: Chandana Kishori Chiluveru <quic_cchiluve@quicinc.com>
